Niko Motion Detector 353-602111 Manual
Model: M42MR
Article Number: 353-602111
Product Overview
This manual provides detailed information for the Niko Motion Detector M42MR, model 353-602111. It is designed for surface mounting, operates at 230V, and offers a detection range of 12-13 meters with a 360° coverage angle.
Multilingual descriptions are available in the product details section.
Installation
Important: Ensure the power is OFF (230 V - OFF) before proceeding with installation.
The installation involves mounting the detector and connecting the wiring. The product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet, adhering to national installation rules.
Wiring Diagram
Connect the wires to the terminals as follows:
- L: Live connection
- N: Neutral connection
- T1/S: Switched live output (to the load)
If you wish to use the contact as a dry contact (potential-free), the T1/S terminal can be left unused.
If a grommet needs to be replaced, ensure the new grommet is halogen-free.
Dismantling
Follow these steps for dismantling the device.
Ensure the power is OFF (230 V - OFF) before dismantling.
Refer to the diagrams for specific parts (a, b).
Dimensions
Physical dimensions of the detector:
- Diameter: Ø 100 mm
- Height: 56 mm
- Mounting hole spacing: 10-12 mm
- Housing dimensions (visible): 100 x 100 x 50 mm
- Overall dimensions (HxWxD): 100 x 100 x 50 mm
App Settings
Configure the detector using the Niko detector tool app. Ensure the power is ON (230 V - ON).
Available settings via the app include:
- Factory settings reset
- Switch ON/OFF control
- Lux level adjustment (up to 500 lux)
- Time delay adjustment (up to 15 min)
The detector supports 2-way Bluetooth® communication for app control. Download the app from the [Google Play] or [App Store].
LED Behaviour
The LED indicators provide status information. Power ON (230 V - ON).
| LED Status | English Description | Meaning |
|---|---|---|
| ? Continuous | Connection OK | Connection is established and stable. |
| ? Breathing | Connection OK, overrule ON | Connection is active, and the device is overriding the current light level to turn ON. |
| ? Flashing | Warming up | The detector is initializing or warming up. |
| ? Continuous | Error | An internal error has occurred. |
| ? Breathing | Warning | A warning condition is present. |
| ? Flashing | Walk test active | The motion detection test mode is active. |
| For other languages, please refer to the original manual. Additional information is available via 'More info -->'. | ||
Specifications
| Specification | Value |
|---|---|
| Article number | 353-602111 |
| Configuration | 230 V Master |
| Input voltage | 230 Vac ± 10%, 50 Hz |
| Maximum power consumption | 0.2 W |
| Circuit breaker | Maximum MCB rating 16 A* |
| Relay contact | NO (max. 10 A), potential-free |
| Maximum load incandescent and halogen lamps (cos φ = 1) | 2300 W |
| Maximum load fluorescent lamps (cos φ ≥ 0.5) | 1200 VA |
| Maximum load economy lamps (CFLi) | 350 W |
| Maximum load LED lamps 230 V | 350 W |
| Maximum load LED driver | 500 VA |
| Maximum load electronic transformer | 500 VA |
| Maximum capacitive load | 140 µF |
| Maximum switching current | 165 A/20 ms - 800 A/200 µs |
| Light intensity range | 20 - 2000 lux, ∞ |
| Number of channels | 1 channel |
| Switch-off delay | pulse, 15 s - 120 min, ∞ |
| Hysteresis on light intensity | ± 10% |
| Detection angle | 360° |
| Detection range (PIR) | Ø 12 m from a height of 3 m |
| Ambient temperature | -25 - +40 °C |
| Mounting method | Surface mounting |
| Mounting height | 2 - 3.5 m |
| Colour | White (RAL 9010) |
| Dimensions visible (HxWxD) | 100 x 100 x 50 mm |
| Dimensions (HxWxD) | 100 x 100 x 50 mm |
| Wire capacity | 1.5/2.5 mm² |
| Maximum range Bluetooth® (free field, depending on the device) | 50 m |
| Operating frequency | 2.4 GHz |
| Maximum radio frequency power | -2 dBm |
| Protection degree | IP54 |
| Impact resistance | IK02 |
| Modification of settings | App (iOS/Android) and 2-way Bluetooth® communication |
| Halogen-free | Yes |
| Marking | CE |
* The MCB rating is limited by national installation rules.
Detection Area
The detector covers a 360° area. The detection range varies depending on the distance and angle:
- Walking: Up to 13 m
- Across: Up to 11 m
- Towards: Up to 3 m
The detection range is measured according to EN/IEC63180 standards.
Troubleshooting
If you encounter issues, consult the table below.
| Problem | Possible Cause | Proposed Solution |
|---|---|---|
| Load does not turn on | The wiring is not correct. | Check the wiring scheme. |
| The ambient light is too strong. | Check the response value luminosity and raise the value if necessary. | |
| Load does not turn off | The switch-off delay is too long. | Check the switch-off delay and shorten the delay if necessary. |
| The detector receives false triggers. | Check for any objects that may cause false triggering and remove them from the detection range or lower the sensitivity. | |
| App cannot connect to the detector | Bluetooth® has been disabled on your mobile device. | Enable Bluetooth® on your mobile device. |
For troubleshooting in other languages, please refer to the original manual.
Support & Contact
For further assistance, please contact Niko:
Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
Website: www.niko.eu
| Region/Country | Phone Number | |
|---|---|---|
| Belgium (NL) | +32 3 778 90 80 | support.be@niko.eu |
| Netherlands | +31 880 15 96 10 | support.nl@niko.eu |
| Belgium (FR) | +32 3 778 90 80 | support.be@niko.eu |
| France | +33 820 20 66 25 | support.fr@niko.eu |
| Switzerland (DE/FR/IT) | +41 44 878 22 22 | support.ch@niko.eu |
| Germany | +49 7623 96697-0 | support.de@niko.eu |
| Austria | +43 1 7965514 | support.at@niko.eu |
| Denmark | +45 74 42 47 26 | support.dk@niko.eu |
| Sweden | +46 8 410 200 15 | support.se@niko.eu |
| Norway | +47 66 77 57 50 | support.no@niko.eu |
| Italy | +41 44 878 22 22 | support.ch@niko.eu |
| Poland | +48 509 378 373 | support.pl@niko.eu |
| Slovakia | +421 2 63 825 155 | support.sk@niko.eu |
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
Niko - home automation, switches, socket outlets and detector
