Victure WE1200 Wi-Fi Range Extender User Manual

Product Diagram

The Victure WE1200 Wi-Fi Range Extender has the following components:

• 1. Antenna: External antennas for Wi-Fi signal transmission.
• 2. WPS Button: Used for Wi-Fi Protected Setup.
• 3. Indicator Light: Shows the status of the device.
• 4. Ethernet Port: For wired network connections.
• 5. Reset Button: Used to restore the device to factory settings.

Customer Service

For more functions or assistance:

• Scan the QR code or search "Victure IPC" on YouTube.
• Contact Victure customer service via email at printer@govicture.com.

Warranty:

Victure offers a 12-month warranty with lifetime professional technical support. Send your order screenshot via email to claim the warranty.

Steps to Install the Wi-Fi Extender

1. Plug the Wi-Fi extender into an outlet and wait for the red light to blink slowly (approx. one minute).
2. Join the Wi-Fi network named WIRELESS-2.4G-XXXX or WIRELESS-5G-XXXX. The password is null (no password required).
• Tips:
• Start setup when the Wi-Fi logo appears on your mobile phone. The '!' symbol next to the Wi-Fi logo is normal.
• Ensure there is no space between "" and "net".
• If the SSID is not found, reset the Wi-Fi extender.
• You can use a PC or mobile phone to connect to the extended Wi-Fi and start setup. If using a computer, unplug the Ethernet cable from the PC before starting setup.
• If your primary router is dual-band, choose either 2.4GHz or 5GHz Wi-Fi. For a single wall or thin wall, 5GHz is recommended. For two walls, 2.4GHz is recommended.
3. The setup page should appear automatically. If not, open a browser on your mobile phone or computer and enter wireless.net or 192.168.10.1.
• Tips:
• If wireless.net doesn't work, try the IP address.
• Once setup is complete, access the setup page only via wireless.net.
4. Choose your preferred language from the upper right corner.
5. Set up a new user account (6-12 bits) and password (6-12 bits). This account is for logging in and changing settings.
6. Choose between Extender Mode or AP Mode, and then select 2.4GWi-Fi or 5G Wi-Fi.

Extender Mode vs. AP Mode

Extender Mode (Wireless Connection)

Use a mobile phone or PC to set up via the setup page.

AP Mode (Wired Connection)

Use a mobile phone or PC to set up via the setup page. Requires an Ethernet cable.

Extender Mode Setup

1. Click "Wireless Scanner" in the upper right corner.
2. Select your primary network and enter its password. Click "Save".
3. Set the SSID and password for the extended wireless network.
• You can choose to make the extended network name and password consistent with the primary network. In this case, the SSID will be XXXX-2.4G-EXT or XXXX-5G-EXT, and the password will be the primary router's password.
• Alternatively, choose "Modify wireless network extension and password" to set a new SSID and password for the extended network. Click "Save".
4. Wait for the indicator light to turn green or orange. Green is ideal; orange means the extender and router should be closer.
5. Connect to the extended Wi-Fi network (e.g., XXXXXX-2.4G-EXT or XXXXXX-5G-EXT).

AP Mode Setup

1. Click the "AP mode switch" and then click "Next".
2. Set the extended wireless network name and password. Attention: The network name must be within 23 bits.
3. Connect the Wi-Fi extender using an Ethernet cable.
4. Wait for the indicator light to turn green or orange. Green is ideal; orange means the extender and router should be closer.
5. Connect to the extended Wi-Fi with the new password.

WPS Button to Connect

1. Press the WPS button on your router. Attention: Refer to your router's manual for WPS mode instructions.
2. Press the WPS button on the Wi-Fi extender. The red light will blink rapidly.
3. Wait for the router to sync with the Wi-Fi extender. The indicator light turning green or orange signifies successful setup.
4. Upon successful setup, the extended network XXXX-ext will be generated, using the primary router's SSID and password.

How to Reset

Use a pin to press the reset button until the indicator light blinks rapidly.

How to Change the Extended Wi-Fi Password in Extender Mode

1. Open a browser on your mobile phone and go to wireless.net.
2. Log in using your username and password.
3. Click "Modify wireless network extension and password".
4. Change the Extender Wi-Fi SSID and password. Attention: The Extender Wi-Fi SSID must be within 23 bits.
5. Click "Save".

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Made in China Version 2.0