Victure AX1800 Dual Band Wi-Fi 6 Router User Manual

Product Overview

The Victure AX1800 is a dual-band Wi-Fi 6 router designed for high-speed internet connectivity.

Product Diagram:

• Connect your modem (Optical fiber/phone line) to the WAN port of the RX1800 using an Ethernet cable.
• Connect your computer or other devices via wired Ethernet or wirelessly.
• The router supports USB NAS + HDD functionality.

Package Contents

• RX1800 x1
• Ethernet Cable x1
• Power Adapter x1
• User Manual x1

Router Setting

Method 1: PC Web Setting

1. Connect the router to your modem using an Ethernet cable. Ensure the 2.4GHz and 5GHz lights are on.
2. Connect your PC to the router's default Wi-Fi SSID (Victure-XXXX or Victure-XXXX-5G) using the default password found on the back of the router.
3. Open a web browser and navigate to myblink.cn or 192.168.16.1.
4. Log in with the default username and password (admin/admin), also found on the back of the router.
5. Select your WAN connection mode (e.g., Dynamic IP, PPPOE) and follow the on-screen instructions.
6. Set your 2.4G and 5G Wi-Fi names (SSID) and passwords. The SSID and password should be 8-32 digits and can include numbers, letters, and specific symbols like !@#$%^&*()-_
7. After saving, wait for one minute and reconnect to the Wi-Fi.

Method 2: Phone Setting

1. Connect the router to your modem using an Ethernet cable. Ensure the 2.4GHz and 5GHz lights are on.
2. Connect your phone to the router's default Wi-Fi SSID (Victure-XXXX or Victure-XXXX-5G) using the default password.
3. Open a mobile browser and navigate to myblink.cn or 192.168.16.1.
4. Log in with the default username and password (admin/admin).
5. Select your WAN connection mode and follow the on-screen instructions.
6. Set your 2.4G and 5G Wi-Fi names (SSID) and passwords.
7. After saving, wait for one minute and reconnect to the Wi-Fi.

USB NAS + HDD Configuration Steps

Samba Visit Steps:

1. Enable Samba Visit function.
2. Type \myblink.cn in your computer's address field to access USB files.
3. Log in with the default username and password (admin/admin).
4. Enjoy sharing USB files.

FTP Visit Steps:

1. Enable FTP Visit function.
2. Click ftp://myblink.cn in your computer's address field to log in.
3. Log in with the default username and password (admin/admin).
4. Enjoy sharing USB files.

Troubleshooting

Q: How to restore the router to factory settings?

A: Press and hold the Reset button for 5-8 seconds until the 2.4GHz and 5GHz lights turn off. This indicates a successful reset.

Q: How to change the default Wi-Fi name (SSID) and password?

A: Log in to the setting page, go to Wi-Fi settings, modify the Wi-Fi name (SSID) and password, and click save.

Q: How to set up the router by cable?

1. Connect the router to your modem with an Ethernet cable. Ensure the 2.4GHz and 5GHz lights are on.
2. Use the provided Ethernet cable to connect the router's LAN port to your computer's network port.
3. Follow steps 2-5 from the PC Web setting method.

Specifications

• Voltage: DC 12V
• Product Name: AX1800 Dual Band Wi-Fi 6 Router
• Model: AX1800

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.