Dyson Solarcycle Morph User Manual
Thank you for choosing to buy a Dyson Light
Take full control with the Dyson Link app. Get step-by-step setup and support. Control how and when your Dyson Light operates.
Download the Dyson Link app from the App Store or Google Play. Open the app and follow the on-screen instructions to create a new account.
For further information and support, visit Dyson.co.uk or call 0800 298 0298.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.
Activating Your Guarantee
Dyson continues to care for its machines even after the guarantee has ended. Your serial number can be found on the rating plate located on the bottom of your light. Please note your serial number for future reference.
Assembling Your Light
The box is engineered to assist with assembly. Follow these steps:
- Lift the base and place it vertically in the slot in the box.
- Insert the main body into the hole in the top of the base, ensuring it is level.
- Insert the locking nut into the bottom of the base and turn it clockwise until tight.
- Insert the power cable into the base, ensuring it sits in the cable guide.
- Remove any protective wrapping from your light.
- Plug in and switch on.
- Download the Dyson Link app and add your light.
Positioning Your Light
The optical head, arm, and stem can be independently rotated up to 360° to easily change the position of your light.
Power [Power Button]
Brightness [Brightness Slider]
Colour Temperature [Color Temperature Slider]
Colour Temperature and Brightness
Swipe to adjust the colour temperature from warm to cool, and to change the brightness of the light.
Tap to quickly switch between colour temperature and brightness levels.
For more information on colour temperature and brightness levels, and to get the best from your light, use the Dyson Link app or visit Dyson.co.uk/support.
Settings
AUTO: The light automatically adjusts to background light conditions, maintaining a constant workspace brightness. It also automatically changes brightness and colour based on your geographical location throughout the day when connected via Bluetooth® wireless technology to the Dyson Link app.
MOTION SENSOR: The light will turn off after five minutes if no movement is detected.
Disabling/Enabling Bluetooth® Wireless Technology
Your light comes with Bluetooth® wireless technology enabled by default. To disable it, press and hold the middle button until the LEDs on the three buttons blink. The main light source will turn off and then on again to indicate Bluetooth has been disabled. To re-enable Bluetooth, repeat the same instructions. The main light will blink twice to confirm Bluetooth has been re-enabled.
USB-C Charging Point
Plug in your mobile devices to charge them at up to 1.5A at 5V via the USB-C port.
