InWin P Series User Manual
For models P65, P75, P85
Product Story
The P Series is an 80 PLUS® Gold certified power supply that focuses its features on efficiency, reliability, and overall PC building experience. The P Series' low noise output makes this PSU the optimal choice for most PC builds.
Features
- 80 PLUS® Gold Certified for High Efficiency
- Ultra Quiet Zero RPM Fan Mode
- 5V and 3.3V DC to DC Design
- Highly Reliable Japanese Aluminum Electrolytic Capacitors
- Multi-Protection Safeguards (OCP, OVP, UVP, SCP, OTP, OPP)
- Fully Modular Cables for Quick and Easy Installation
- 5-Year Warranty
Specifications
| Model | P65 | P75 | P85 | ||||
|---|---|---|---|---|---|---|---|
| Model Number | IW-PS-P650W | IW-PS-P750W | IW-PS-P850W | ||||
| Total Power | 650W | 750W | 850W | ||||
| Material | SECC | ||||||
| Type | ATX12V V2.4 / EPS12V V2.92 | ||||||
| Cable Management | Fully Modular | ||||||
| PFC | Active PFC (> 0.95) | ||||||
| Efficiency | 80 PLUS® Gold (Up to 90%) | ||||||
| MTBF (Hours) | > 100,000 hrs. | ||||||
| AC Input | 100-240Vac., 10A, 50-60Hz | ||||||
| Fan | 135mm FDB Fan | ||||||
| Typical Load Fan Noise(dBA) (50% Loading) | < 25dBA | ||||||
| Operating Temperature Range (°C) | 0~40 °C | ||||||
| Full Protection | OCP/ OVP/ UVP/ SCP/ OTP/ OPP | ||||||
| Safety Certifications | cTUVus/ TUV/ CB/ BSMI/ CE/ FCC/ EAC/ CCC/ RCM | ||||||
| Dimensions (L x W x H) | 160 x 150 x 86mm | ||||||
| Package Dimensions (L x W x H) | 210 x 325 x 100mm | ||||||
| Net Weight | 2.35kg | 2.46kg | 2.64kg | ||||
| Gross Weight | 2.81kg | 2.92kg | 3.12kg | ||||
| Warranty | 5 Years | ||||||
| Connector | 20+4 Pin Motherboard | 1 | 1 | 1 | |||
| 8 (4+4) Pin CPU | 1 | 2 | 2 | ||||
| 8 (6+2) Pin PCI-E | 4 | 4 | 6 | ||||
| 4 Pin Peripheral | 4 | 4 | 4 | ||||
| SATA (90 Degree) | 9 | 12 | 12 | ||||
| Floppy | 1 | 1 | 1 | ||||
| AC INPUT | 100-240Vac., 10A, 50-60Hz | ||||||
| Model | DC OUTPUT | +12V | +5V | +3.3V | -12V | +5VSB | Total Power |
| P65 | Max. Output Current | 54.2A | 22A | 22A | 0.3A | 3A | 650W |
| Max. Combined Power | 650W | 120W | 3.6W | 15W | |||
| P75 | Max. Output Current | 62.5A | 22A | 22A | 0.3A | 3A | 750W |
| Max. Combined Power | 750W | 120W | 3.6W | 15W | |||
| P85 | Max. Output Current | 70.9A | 22A | 22A | 0.3A | 3A | 850W |
| Max. Combined Power | 850W | 120W | 3.6W | 15W | |||
* InWin products comply with RoHS regulations.
* Specifications may vary based on different regions.
Package Contents
- P Series Power Supply Unit x1 (P65/ P75/ P85)
- QR Code Card x1
- Modular Cables Box x1
Modularized Cables Box
- 20+4 Pin Motherboard Connector (x1)
- 8 (4+4) Pin CPU Connector (x1 for P65, x2 for P75/P85)
- 8 (6+2) Pin PCI-E Connector (x4 for P65/P75, x6 for P85)
- 4 Pin Peripheral Connector (x4)
- SATA (90 Degree) Connector (x9 for P65, x12 for P75/P85)
- Floppy Connector (x1)
- Power Cord (x1)
- Cable Ties (x8)
- Mounting Screws (x4)
Cable Information
- 20+4 Pin Motherboard Cable: 650mm
- 8 (4+4) Pin CPU Cable (P65): 650mm
- 8 (4+4) Pin CPU Cable (P75/P85): 650mm
- 8 (6+2) Pin PCI-E Cable: 600mm + 100mm extension
- SATA (90 Degree) Cable (P75/P85): 100mm + 100mm + 100mm + 550mm
- SATA (90 Degree) Cable (P65): 100mm + 100mm + 550mm
- 4 Pin Peripheral Cable: 550mm + 100mm
- Floppy Cable: 150mm
Installation
- Make sure the power supply's AC power cable is not connected before installation.
- Place the power supply unit into the space provided in the case and secure the power supply unit with the screws.
- Connect 24-pin power to the 24-pin socket on the motherboard.
- Connect the 8-pin +12V cable to the motherboard.
- A. If your motherboard has an 8-pin +12V socket, connect the 8-pin cable directly to your motherboard.
- B. If your motherboard has a 4-pin socket, detach the 4-pin from the 8-pin cable, and plug the 4-pin cable directly to your motherboard.
- Connect the peripheral cables, PCI-Express cables, and the SATA cables to the appropriate socket.
- Make sure all the cables are tightly connected and save any unused modular cables for future usage.
- Connect the AC power cord to the power supply and turn it on by switching the power button to the "I" position.
Precautionary Installation Guide for High-Powered Graphics Cards
Some graphics cards on the market possess two or three PCIe connectors, and the power of these graphics cards usually exceed 225W (150W PCIe 8-pin connector + 75W from motherboard PCIe slot). The maximum rated wattage of a single PCIe 8-pin power cable and connector is 150W, therefore, when installing a high-powered graphics card, please make sure to use two or three independent PCIe cables to connect to the high-powered graphics cards.
Troubleshooting
These troubleshooting points will help you diagnose and solve problems with your power supply if the unit fails to operate properly:
- Please make sure the power supply and power cord are connected properly.
- Please make sure the power cord is plugged into the power socket.
- Please make sure the power supply I/O button is switched to the "I" position.
- Please check if all the connectors (motherboard and peripheral) are connected properly.
- Please allow a 5-second interval before turning the power on again when power supply is switched off manually.
- If you are still experiencing difficulties, please contact your local distributor for RMA support.
Notices and Warranty
Notices
- Please use the anti-static precautions while installing the components to prevent damage and injury.
- Install in accordance with the user manual's instructions and safety warnings.
- High voltages are present in the power supply. Do not open the power supply case. Any modifications may damage the product and may place the user at risk.
- Do not use the power supply if it has been wet or damaged to avoid electric shock or injury.
- Do not install the power supply near any heat sources such as: radiators, heat registers, or other apparatus that produces heat.
- Do not insert any objects into the open ventilation or fan grill area.
- Please use only this product's exclusively supplied cables. Other cables may not be compatible and could cause serious damage to your system and power supply.
- Do not modify the cables and/or connectors included with the power supply.
Warranty
- InWin provides a 5-year warranty toward the product. The warranty covers malfunctions or flaws before customer use. The warranty starts from your initial purchase (according to the date on your receipt). Please note that InWin does not honor the warranty for the product if it is not purchased personally or if it is purchased through an unauthorized distribution channel.
- This limited warranty shall not apply if the defect was caused through any of the following:
- Abuse and misuse,
- Operation outside of product specification,
- Unauthorized service or modification,
- Any and all alteration of the product.
- For more detailed warranty information, please visit the InWin retail website at www.in-win.com.
- The actual product is subject to change without prior notice. In Win Development Inc. reserves the right to make final modifications.
InWin
