Tribesigns Assembly Instructions

Call Us!

We're here to help!

If you have any issues with this product, please contact our customer service team before returning it.

Email: support@tribesigns.com ✉️

Phone: ? 1-424-220-6888

We want you to be completely satisfied with your purchase! If anything is missing, damaged, incorrect, or not what you expected, don't worry. Please keep the outer packaging and take photos of both the packaging and products, and then reach out to us at support@tribesigns.com or call us at 1-424-220-6888. We'll take care of everything and send you a free replacement, so you can enjoy your purchase as soon as possible without any hassle.

Assembly Instructions:

1. Carefully read these instructions and keep them for future reference.
2. Refer to the parts list for guidance and ensure that you have all the pieces before starting the assembly process. If anything is missing, damaged, or incorrect, contact us FIRSTLY BEFORE assembling.
3. When assembling, place all parts on a soft, clean, and flat surface, such as a carpet, to prevent any scratches.
4. To avoid misalignment of the holes, please do not fully tighten the screws until you ensure all parts are in place.

Important Safety Information and Tips

Electric Screwdriver Use: When using an electric screwdriver, reduce the power and torque to avoid damaging the furniture. [Diagram showing a person using a tool with a warning symbol ⚠️, advising to reduce power and torque when using an electric screwdriver to avoid damaging the furniture.]

Tip-Over Restraint: Install the tip-over restraint provided. Use of tip-over restraints may only reduce but not eliminate the risk of tip-over. [Diagram illustrating a table with a checkmark ✔️ indicating stability when a tip-over restraint is used, and a table with a cross mark ❌ indicating instability without it. Text advises to install the provided tip-over restraint.]

Parts & Hardware List

Parts:

• Part 1: Tabletop (1 pc)
• Part 2: Side Support Rails (2 pcs)
• Part 3: Cross Support Rails (2 pcs)
• Part 4: Central Support Rail (1 pc)
• Part 5: Legs (4 pcs)

Hardware:

• Hardware A: Cam Locks (12 pcs)
• Hardware B: Cam Bolts/Screws (12 pcs)
• Hardware C: Wooden Dowels (16 pcs)
• Hardware D: Anti-Tip Restraint Kit (1 pc)
• Hardware E: Allen Wrench (1 pc)
• Hardware F: Screws (4 pcs)
• Hardware G: Small Wrench (1 pc)
• Hardware H: Small Screws (8 pcs)
• Hardware I: Washers (8 pcs)
• Hardware J: Large Screws (8 pcs)
• Hardware K: Nuts (8 pcs)

Installation of Cams and Pins

Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.

Correct Cam Installation: Ensure there is 'No gap' between the cam and the panel when locked. [Diagram showing the correct insertion of a cam bolt and cam lock, with a close-up indicating 'No gap' for proper locking.]

Incorrect Cam Installation: Avoid gaps. [Diagram showing incorrect cam insertion with a gap and a cross mark ❌.]

Assembly Steps

Step 1:

Diagram shows attaching four legs (5) to two side support rails (2) using dowels (C) and screws (F). Hardware quantities are indicated: C (16pcs), F (4pcs).

Step 2:

Diagram shows connecting the leg/rail assemblies from Step 1 to the central support rail (4) and cross support rails (3) using hardware H, I, J, K. The diagram highlights the connection points and the hardware used (H, I, J, K - 8pcs each).

Step 3:

Diagram shows attaching the tabletop (1) to the base structure. This involves inserting cam bolts (B) into the tabletop and then locking them with cam locks (A) inserted into the side rails (2) and cross rails (3). Hardware quantities: A (4pcs), B (8pcs).

Step 4:

Diagram shows the completed table structure, confirming the attachment of the tabletop (1) to the base, with all parts secured. It shows the side rails (2) and central support rail (4) connected to the tabletop.

Step 5:

Diagram shows the final step of attaching the anti-tip restraint kit (D) to the back of the table and securing it to the wall. It illustrates the process in three sub-steps: attaching the bracket to the furniture, attaching the strap to the wall, and connecting them.

Follow Tribesigns

Connect with us on social media:

• Facebook
• Twitter
• Pinterest
• YouTube
• Instagram

Return Policy

Tribesigns' Way:

• Email: support@tribesigns.com ✉️
• Action: Replacement/Refund
• Customer Satisfaction: You ?

Standard Way:

• Action: Re-package item ?
• Action: Schedule pick-up ✈️
• Action: Track package ?
• Outcome: Replacement
• Customer Satisfaction: You ?

Contact our customer service team for assistance.