Acer LCD Monitor Safety and Compliance Information

Important Safety Instructions

General Precautions

Cleaning the LCD Monitor Screen

• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

Placement and Environment

• Do not place the LCD monitor near a window. Exposure to rain, moisture, or sunlight can severely damage it.
• Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing outside this range may result in permanent damage.
• Do not use in areas with steam or water.
• Do not use in high temperature/humidity areas (e.g., bathrooms, saunas, car interiors).
• Do not use near significant temperature changes (e.g., air conditioners, heaters).
• Keep out of reach of children.
• Do not insert foreign objects into the unit.
• Do not place on unstable surfaces.

Handling and Servicing

• Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
• Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing.
• Immediately unplug your monitor and call an authorized technician if:
  • Signal cable is frayed or damaged.
  • Liquid spills onto the monitor or it is exposed to rain.
  • The monitor or case is damaged.
• Handle power cords carefully: do not pull, twist, bend, modify, place heavy objects on them, pinch them, expose them to sharp objects, or trip over them.
• Do not handle with wet hands. Do not wet, wash, or immerse the power cord.
• Ensure the power plug is securely inserted into the outlet. Do not use multi-plug adapters.
• Periodically remove dust from the power plug.
• If not using for a long period, unplug the power cord.

Stability Hazard

• The product may fall, causing serious personal injury or death. Securely attach to floor/wall per installation instructions.
• To prevent tipping, always use recommended cabinets/stands/installation methods.
• Always use furniture that can safely support the product.
• Ensure the product does not overhang the edge of supporting furniture.
• Educate children about the dangers of climbing furniture.
• Route cords so they cannot be tripped over, pulled, or grabbed.
• Never place on an unstable location.
• Never place on tall furniture without anchoring.
• Never place on cloth or other materials between the product and furniture.
• Never place items that might tempt children to climb (toys, remotes) on top of the product or furniture.

FCC Notices

Class B Digital Device

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

Operation Conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product. In order to prevent damage to the monitor, do not lift the monitor by its base.

Notice: Canadian users

CAN ICES (B) / NMB (B)

CE Declaration of Conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Important Notices

Shielded Cables

All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Peripheral Devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Disposal of Waste Equipment

European Union - Private Households

[WEEE symbol] This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Product Purpose

Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Model Information

• Model Number: MU.CSB00.001 Q41G24M778673B