Thermaltake VIEW 31 Tempered Glass Mid Tower Computer Case
User Manual
Picture is for reference only.
Join Tt Community To Receive Benefits
Dear Valued Customer, Thank you for choosing Thermaltake. As a new user, we value your thoughts and opinions, and your feedback is important to us. We at Thermaltake would like to use this opportunity to invite you to join our Community Forums. Register today to start enjoying the full benefits of our community.
Benefits of being a member:
- Quick and responsive user support
- Receive help and advice with new builds
- Keep up to date with new product releases
- Share your thoughts and builds with the community
- Enter monthly contests and giveaways
Tt LCS-Liquid Cooling Support Certification
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Brand official website
Global Facebook
https://www.facebook.com/ThermaltakeInc
Taiwan Facebook
http://www.facebook.com/ThermaltakeTW
Global community forums
Contents
Chapter 1. Product Introduction
- 1.0 Specification
- 1.1 Accessory
- 1.2 Warning and Notice
Chapter 2. Installation Guide
- 2.0 Side Panels Disassembly
- 2.1 Power Supply Unit (PSU) Installation
- 2.2 Motherboard Installation
- 2.3 3.5" & 2.5" HDD Installation
- 2.4 PCI Card Installation
- 2.5 Air Cooling Installation
- 2.6 Liquid Cooling Installation
Chapter 3 Leads Installation Guide
- 3.0 Case LED connection
- 3.1 USB 3.0 connection
- 3.2 Audio connection
Specification
Specification | Details |
Case Type | Mid Tower |
Dimension (H*W*D) | 497 x 250 x 511mm (19.5 x 9.8 x 20.1 inch) |
Side Panel | Tempered Glass (Left & Right) |
Material | SPCC |
Fan Support | Front: 3 x 120mm, 2 x 140mm, 1 x 200mm Top: 3 x 120mm, 3 x 140mm, 2 x 200mm Rear: 1 x 120mm, 1 x 140mm Bottom: 2 x 120mm, 2 x 140mm |
Radiator Support | Front: 1 x 360mm, 1 x 280mm Top: 1 x 360mm, 1 x 280mm Rear: 1 x 120mm, 1 x 140mm Bottom: 1 x 120mm, 1 x 140mm |
Clearance | CPU cooler height limitation: 180mm VGA length limitation: 278mm(with HDD rack) / 420mm(without HDD rack) PSU length limitation: 180mm (With One Bottom Fan) / 220mm (Without Bottom Fan) |
Accessory
Figure | Parts Name | Q'ty | Used for |
? | Stand-off #6-32 x 6mm | 2 | Motherboard |
? | Screw #6-32 x 6mm | 4 | Power |
? | Screw #6-32 x 5mm | 12 | 3.5"HDD |
⚪ | Rubber | 12 | 3.5"HDD |
? | Screw M3 x 5mm | 22 | Motherboard, 2.5"HDD |
? | Nut Setter | 1 | Stand-off |
? | Screw Ø5 x 12mm | 4 | Case Fan |
? | Cable Tie | 5 | Cable Management |
? | Buzzer | 1 | Motherboard Alarm |
Warning and Notice
Diagram illustrating dimensional limits: A CPU cooler with a maximum height of 180mm is shown. A VGA card with a maximum length of 278mm is also depicted.
- [CPU Cooler Height Limit: 180mm]
- [VGA Length Limit: 278mm]
Chapter 2. Installation Guide
2.0 Side Panels Disassembly
Illustration of side panel removal: Screws are shown on the rear of the chassis, indicating they should be removed to open the side panel.
2.1 Power Supply Unit (PSU) Installation
Illustration of PSU installation: A power supply unit is shown being placed into its designated bay within the computer case.
2.2 Motherboard Installation
Illustration of motherboard installation: The computer chassis is shown laid on its side, with a motherboard being positioned and secured with screws.
2.3 3.5" & 2.5" HDD Installation
Illustrations of 3.5" and 2.5" HDD installation: Two mounting methods (Type A and Type B) are shown for installing hard disk drives into the chassis.
2.4 PCI Card Installation
Illustration of PCI card installation: Type A shows a graphics card being inserted into a PCI-E slot. Type B (Optional) shows an extended installation method. A note indicates 'PCI-E Cable Not Included'.
2.5 Air Cooling Installation
Diagrams for Air Cooling Installation: Shows placement and sizes of fans for Top (20cm x 2, 14cm x 3), Rear (14cm x 1, 12cm x 3), Front (12cm x 2, 20cm x 1, 14cm x 2, 12cm x 3), and Bottom (12cm x 3).
2.6 Liquid Cooling Installation
Diagrams for Liquid Cooling Installation: Shows placement and sizes of radiators/fans for Top (36cm x 1, 28cm x 1), Rear (14cm x 1, 12cm x 1), Front (12cm x 1, 28cm x 1), and Bottom (36cm x 1, 14cm x 1).
Chapter 3 Leads Installation Guide
3.0 Case LED connection
Diagrams for Leads Installation: Illustrations show the connections for case LEDs and switch leads to the motherboard panel header.
3.1 USB 3.0 connection
Diagrams for Leads Installation: Illustrations show the USB 3.0 connection, detailing the cable and port.
3.2 Audio connection
Diagrams for Leads Installation: Illustrations show the pinouts for Audio Azalia and Audio AC'97 functions, detailing connections for L-OUT, SENSE, KEY, R-OUT, MIC-POWER, MIC-IN, and GND.