Chapter 1: Product Introduction
1.1 Specification
| Case Type | Mid Tower |
|---|---|
| Dimension (H*W*D) | 521 x 216 x 469mm (20.5 x 8.5 x 18.4 inch) |
| Expansion Slots | 7 |
| Material | SPCC |
| Motherboards | 6.7" x 6.7" (Mini ITX), 9.6" x 9.6" (Micro ATX), 12" x 9.6" (ATX) |
| Drive Bays | 2 x 5.25" Accessible 2 x 3.5", 3 x 2.5" (With HDD tray) Hidden |
| Cooling System | Rear (exhaust): 120 x 120 x 25 mm fan (1000rpm, 16dBA) |
| Fan Support | Front: 2 x 120mm, 2 x 140mm Top: 2 x 120mm Rear: 1 x 120mm |
| Radiator Support | Front: 1 x 240mm Top: 1 x 240mm Rear: 1 x 120mm |
| Other | CPU cooler height limitation: 160mm VGA length limitation: 390mm (Without Front Fan) |
1.2 Accessory
| Figure | Parts Name | Q'ty | Used for |
|---|---|---|---|
| ● | Screw #6-32 x 6 mm | 6 | PSU, PCI Slot |
| ● | Screw #6-32 x 5 mm | 8 | 3.5"HDD |
| ● | Screw M3 x 5 mm | 25 | ODD, Motherboard & 2.5" HDD |
| ● | Stand-off #6-32 x 6 mm | 3 | Motherboard |
| ● | Cable Tie | 4 | Zip tie |
1.3 Warning and Notice
Warning:
CPU Cooler Height Limitation: The height limit for the CPU heatsink is 160 mm (6.3 inches).
VGA (Add-on card) Length Limitation: The length limit for the VGA (graphics card) is 390 mm (15.4 inches).
Chapter 2: Installation Guide
2.1 Side Panel Disassembly
To disassemble the side panel: Remove the screws on the back of the chassis and open the side panel.
2.2 PSU Installation
To install the Power Supply Unit (PSU): Place the power supply in the proper location and secure it with screws.
2.3 Motherboard Installation
To install the motherboard: Lay the chassis down. Install the motherboard in the proper location and secure it with screws.
2.4 5.25" Device Installation
To install a 5.25" device:
- Pull out the front panel.
- Remove the 5.25" drive bay cover.
- Insert the 5.25" device and tighten it with the screws.
2.5 3.5" & 2.5" HDD Installation
To install 3.5" and 2.5" HDDs: HDDs are installed into designated drive bays and secured with screws.
2.6 PCI Slot Usage
To install PCI slots:
- Pull the HDD tray out.
- Place the HDD on the proper location and secure it with screws.
- Slide the HDD tray back to the HDD cage.
To install PCI cards:
- Loosen the screws with a screwdriver.
- Install the PCI card in the proper location and secure it with screws.
2.7 Liquid Cooling Installation
Rear Cooling: Supports one 120mm fan.
Top Cooling: Supports one 240mm radiator.
2.8 Air Cooling Installation
Front Fan Support: Supports two 120mm or two 140mm fans.
Chapter 3: Leads Installation
This section details the connection of various leads to the motherboard.
3.1 Case LED Connection
Connect case LED and switch leads to the motherboard's panel header according to the motherboard manufacturer's manual.
3.2 USB 2.0 Connection
Consult the motherboard manual for the "USB connection" section to connect USB 2.0 devices.
3.3 USB 3.0 Connection
Ensure the motherboard supports USB 3.0. Connect the USB 3.0 cable to an available USB 3.0 port on the computer.
3.4 Audio Connection
Refer to the audio connector illustration and motherboard manual. Ensure the motherboard supports AC'97 or HD Audio (Azalia) to avoid device damage.
Audio HD Audio Function Pinout:
- PORT1 L (Brown)
- PORT1 R (Red)
- PORT2 R (Yellow)
- SENSE_SEND (Purple)
- PORT2 L (Blue)
- AUD GND (Black)
- PRESENCE# (Black)
- SENSE1_RETURN (Orange)
- KEY
- SENSE2_RETURN (Green)
USB Function Pinout:
- VCC1 (Red)
- RED2
- RED1
- VCC2
- D1- (White2)
- WHITE1 D2-
- D1+ (Green2)
- GREEN1 D2+
- GND (Black2)
- BLACK1 GND
- NC
- N.C
- KEY
- KEY
USB 3.0 Connection: NC, N.C, KEY, KEY
Chapter 4: Other
4.1 Thermaltake Power Supply Series (Optional)
Thermaltake offers a range of power supplies, emphasizing quality, efficiency (80 PLUS certified), and environmental friendliness. They provide warranties from 2 to 7 years.
For more information, visit the official website: www.thermaltake.com
Global Facebook: https://www.facebook.com/ThermaltakeInc
Taiwan Facebook: https://www.facebook.com/ThermaltakeTW
