CASO Click & Charge Quick Charging Station (3623)
Charge your CASO Click Series batteries faster with this dedicated quick charging station.
Compatibility
This quick charging station is designed to charge batteries for the 'CASO Click Series'. The rechargeable batteries are compatible with the following devices:
- Click & Mash (item no.: 3605)
- Click & Blend (item no.: 3622)
- Click & Mix (item no.: 3630)
Using the Quick Charging Station
- Connect the USB C end of the charging cable to the charging station.
- Plug the charging adapter into a power socket.
- During the charging process, the LED display flashes to indicate the charging progress. The LEDs light up permanently once the device is fully charged.
Note ℹ️
It takes approximately 3 hours until the battery is fully charged. The device cannot be used while it is charging.
Safety Information
⚠️ DANGER
- Do not charge the battery with a damaged USB-C charging cable or power adapter.
- Never disassemble the battery, expose it to high temperatures, or throw it into a fire.
- If the battery has leaked, do not allow battery acid to come into contact with your skin, eyes, or mucous membranes. In the event of contact with battery acid, rinse the affected areas immediately with plenty of clean water and seek medical assistance without delay.
Please observe the safety instructions and detailed descriptions found in the operating instructions for the devices.
Technical Data
| Device | Quick charging station with battery |
|---|---|
| Name | CASO Click & Charge |
| Item No. | 03623 |
| Connection Data | 11.1V, 2000mAh, 22.2Wh |
| External Measurements (WxHxD) | 70 mm x 57 mm x 100 mm |
| Net Weight | 291 g |
Domain Default page
CASO Design Onlineshop
