X5 Home Security Mini WiFi Camera

Installation APP

Mobile phones can scan the following QR code for download and installation. Name of Software: YsxLite.

[QR code for YsxLite app download]

Connection Method 1: No Network Connection

1. Connect to the machine's own hotspot. The hotspot name starts with "BAT". Click "Connect". After the link is successful, return to the APP, as shown in the following figures.

Screenshots of a mobile phone's WiFi settings. The left shows a list of available networks, highlighting a connection to a network named 'BAT010773HDQBA'. The right shows a similar list, highlighting a successful connection to a network named 'BAT348726AIHJM' under 'MY NETWORKS'.

Click to open the system WiFi interface. The connected WiFi network has a "BAT" starting name.

2. After entering the page, follow the steps below.

Screenshot of the YsxLite mobile application displaying a live camera feed labeled "Camera" within a red bounding box, showing a preview of the camera's view.

After the successful connection is displayed, click "Screen viewing".

3. With no network link completed, you can watch the video closely.

Screenshot of the YsxLite mobile application displaying a live video stream labeled "LiveStream", with playback controls at the bottom, including play/pause ▶️, volume, and resolution settings.

Note: You cannot remotely monitor the WiFi that links the camera within 4 meters of the camera without a network link. With WiFi at home, you can perform the following steps to achieve remote monitoring.

Connection Method 2: Internet Connection

1. Connect to the machine's own hotspot. The hotspot name starts with "BAT". Click "Connect". After the link is successful, return to the APP, as shown in the following figures.

Screenshots of a mobile phone's WiFi settings. The left shows a list of available networks, highlighting a connection to a network named 'BAT010773HDQBA'. The right shows a similar list, highlighting a successful connection to a network named 'BAT348726AIHJM' under 'MY NETWORKS'.

Click to open the system WiFi interface. The connected WiFi network has a "BAT" starting name.

2. Find your own WiFi account and enter the password correctly, then click "OK" to return.

Three screenshots of the YsxLite mobile application. The first shows the main camera interface. The second displays a "Setting" menu with options like "WiFi" ?, "Alarm", "Restore". The third shows a "WiFi" settings screen with options to search for nearby access points (APs) and enter a password.

a) Click on the gear icon ⚙️ in the figure.

b) Click "WiFi settings".

c) Find your WiFi and enter the password link.

3. When you return to the APP, you will see that the reminder link is successful. At this time, you can click the play button ▶️ to view the screen, and the remote setting is successful.

Two screenshots of the YsxLite mobile application. The left shows the main camera interface labeled "Camera". The right shows the "LiveStream" interface with playback controls.

After the link is displayed successfully, watch the screen.

Note: As long as the WiFi password is correct, it can be linked. If it cannot be linked, first forget the router password, verify the password, and then re-enter it.