X5 Wireless Microphone System Quick Start Guide

Introduction

Thank you for choosing the X5 wireless microphone product. This system utilizes 2.4GHz adaptive frequency hopping communication and innovative digital wireless low-latency technology to deliver high-quality audio and a stable wireless connection. It is widely applicable for interviews, short video recording, online live streaming, teaching, and other wireless audio transmission fields.

Product Configurations

The X5 system is available in several configurations:

• Configuration A: Transmitter ×1, Receiver ×1, Camera Audio Cable ×1, OTG Adapter ×1
• Configuration B: Transmitter ×2, Receiver ×1, Camera Audio Cable ×1, OTG Adapter ×1
• Configuration C: Transmitter ×2, Receiver ×1, Charging Case ×1, Camera Audio Cable ×1, OTG Adapter ×1, Windscreens ×2
• Configuration D: Recording Transmitter ×2, Receiver ×1, Charging Case ×1, Camera Audio Cable ×1, OTG Adapter ×1, Windscreens ×2, Data Cable

Transmitter (TX) Functions

The transmitter features:

• ① External Microphone Jack: Connect an external microphone.
• ② Built-in Microphone: Omnidirectional pickup. Attaching a windscreen reduces wind noise.
• ③ Type-C Socket: For charging and data connection.
• ④ Power and Connection Indicator Light:
  • Blue light flashing: Not connected.
  • Blue light solid: Connected.
  • Red light flashing: Not connected and low battery.
  • Red light solid: Connected and low battery.
  • Red light flashing during charging: Charging.
  • Blue light solid when fully charged: Fully charged.
• ⑤ Function Setting Indicator Light:
  • Blue light solid: Noise reduction enabled.
  • Red light flashing: Recording enabled (if equipped).
  • Blue light flashing: Noise reduction and recording enabled simultaneously (if equipped).
• ⑥ Power Button: Press and hold for 1 second to turn on/off.
• ⑦ SET Button:
  • Tap: Enable/disable noise reduction.
  • Press and hold for 2 seconds: Enable/disable recording function (if equipped).

Receiver (RX) Functions

The receiver features:

• ⑧ Headphone Monitoring Jack: For audio monitoring.
• ⑨ Power Button: Press and hold for 1 second to turn on/off.
• ⑩ SET Button:
  • Tap: Adjust volume.
  • Press and hold: Switch output mode.
• ⑪ Audio OUT Jack: Connects to recording devices like cameras.
• ⑫ Type-C Socket: For charging and connecting to phones/computers.

RX Display Screen Functions:

• ⑬ Tx Channel Display: Green when connected, white when not connected.
• ⑭ Displays TX battery level.
• ⑮ Displays wireless signal strength.
• ⑯ Displays RX battery level.
• ⑰ Displays output volume level.
• ⑱ Displays microphone pickup strength.
• ⑲ Output Mode Display:
  • Mono: Mixed output, audio from channels 1 and 2 combined into left and right channels.
  • Stereo: Stereo output (Channel 1 is left, Channel 2 is right).
  • Ms (Safety Track): Right channel output is 6dB lower than the left channel.
• ⑳ Displays transmitter recording status (REC indicates recording, if equipped).
• ㉠ USB Connection Icon: Displays when successfully connected to a phone or computer via OTG.

Pairing

If the TX and RX cannot connect, follow these pairing steps:

1. TX: While powered on, simultaneously press and hold the Power button and the SET button for 2 seconds until the indicator light flashes rapidly. (If there are two TX units, perform this operation similarly). Then proceed to step 2.
2. RX: While powered on, simultaneously press and hold the Power button and the SET button for 2 seconds until the signal icon on the display screen flashes.
3. Wait for the TX and RX indicators to stop flashing. Pairing is complete.

Installation and Usage

1. Press and hold the Power buttons on both TX and RX to turn them on.
2. Attach the TX to your collar or clothing.
3. Mount the RX onto your camera.
4. Use the 3.5mm camera audio cable to connect the RX's OUT jack (⑪) to the camera's MIC input jack.
5. Set the RX output volume to 0dB or +3dB. Set the camera's recording volume to a lower level to improve the signal-to-noise ratio and prevent clipping distortion.

Using RX with a Phone:

• Connect the RX's Type-C socket (⑫) to the phone's socket using a Type-C or Lightning/OTG adapter.
• For some Type-C phones, you may need to enable the OTG function in the phone's settings.

Using RX with Other Devices (e.g., Computer):

• Connect the RX's Type-C socket (⑫) to the computer's Type-C or USB socket using a Type-C/OTG adapter.
• Connect the RX's OUT jack (⑪) to the sound card's MIC or LINE IN jack.

TX Built-in Recording Function (If Equipped)

Press and hold the TX's SET button (⑦) for 2 seconds to start or end recording. This function is for audio backup purposes only; recording files are automatically saved and deleted in a loop.

• Storage space is approximately 4GB.
• Recording files can be exported using a Type-C data cable.

Precautions

1. This product is a precision electronic device. Avoid water exposure or severe drops. If water is accidentally ingested, power off the device, shake out moisture, and seek professional technical assistance promptly.
2. If the device will not be used for an extended period, charge the battery fully every three months to maintain battery performance.
3. Do not expose the internal battery to direct sunlight, fire, or similar overheating environments.
4. If the TX/RX cannot be turned off, press and hold the power button for 8 seconds to reset.
5. To avoid signal dropouts, try to keep the transmitter and receiver facing each other during use (as shown in the diagram).

Technical Specifications

Charging Case Specifications:

• To check the remaining battery level of the charging case, open the lid to wake up the indicator light.
• When the lid is closed, the device enters automatic charging mode.
• Can charge TX + TX + RX up to 2 times.
• Opening the lid automatically powers on TX + RX; closing the lid automatically powers off TX + RX.

Hazardous Substances Table

Name and Content of Hazardous Substances or Elements in the Product

Legend:

• ✔️: Indicates that the content of the hazardous substance in all homogeneous materials of this part is below the limit requirements specified in the SJ/T 11364-2014 standard.
• X: Indicates that the content of the hazardous substance in at least one homogeneous material of this part exceeds the limit requirements specified in the SJ/T 11364-2014 standard.

Note 1: Most parts of this product are made of non-toxic and environmentally friendly materials. Parts containing toxic or hazardous substances or elements are due to global development level limitations preventing their substitution.

Note 2: The reference standard for the Environmental Protection Use Period depends on conditions such as the product's normal operating temperature and humidity. The Environmental Protection Use Period (EPUP) indicated (Ten Years) is counted from the date of manufacture. Hazardous substances in electronic information products will not cause severe environmental pollution or serious harm to human health or property under normal use conditions for a period of ten years.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.