W287-66
Signature Design by Ashley Media Console Assembly Instructions
Important Safety Notice
Always use proper tools.
Follow the assembly steps in order. Do not skip any steps.
Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
Keep the instructions for future reference.
Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves - use a step ladder.
Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Note: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
(Additional safety notices in Spanish, French, and Chinese are provided in the original document.)
Parts List
Panels:
- Part A: Long panel (x1)
- Part B: Long panel (x1)
- Part C: Long panel (x1)
- Part D: Square panel (x1)
- Part E: Square panel (x1)
- Part F: Short panel (x1)
- Part G: Short panel (x1)
- Part H: Vertical panel (x1)
- Part J: Vertical panel (x1)
- Part K: Shelf panel (x3)
- Part L: Decorative/Drawer front panel (x2)
- Part M: Decorative/Drawer front panel (x1)
- Part N: Panel for hinges (x1)
- Part P: Small panel (x1)
- Part R: Small panel (x2)
- Part S: Support bracket (x4)
- Part T: Support bracket (x2)
- Part X: Small panel (x3)
- Part Y: Small panel (x1)
Hardware:
- Part U: Screw, 37.5mm x 33mm (x24)
- Part W: Screw, D5mm x 12mm (x24)
- Part Z: Screw, D7.5mm x 33mm (x28)
- Part AA: Screw, #7 x 15mm (x24)
- Part AB: Screw, #8 x 12mm (x6)
- Part AC: Screw, #7.5 x 15mm (x12)
- Part AD: Screw, #8 x 38mm (x12)
- Part AE: Screw, #7 x 15mm (x12)
- Part AF: Screw, #9 x 39mm (x4)
- Part AJ: Anti-tip restraint kit (x1)
Note: Some hardware items like screwdrivers are not included.
Assembly Steps
Step 1
Take panel A and align it with panel B. Insert eight (8) Part U screws through the pre-drilled holes on panel B into the corresponding holes on panel A. Use a screwdriver to tighten.
Step 2
Take panel B and align it with panel A. Insert four (4) Part U screws through the pre-drilled holes on panel A into the corresponding holes on panel B.
Step 3
Take panel B and align it with panel C. Insert four (4) Part U screws through the pre-drilled holes on panel C into the corresponding holes on panel B.
Step 4
Take panel C and align it with panel D. Insert four (4) Part U screws through the pre-drilled holes on panel D into the corresponding holes on panel C.
Step 5
Take panel D and align it with panel E. Insert two (2) Part U screws through the pre-drilled holes on panel E into the corresponding holes on panel D.
Step 6
Take panel E and align it with panel F. Insert two (2) Part U screws through the pre-drilled holes on panel F into the corresponding holes on panel E.
Step 7
Attach vertical panels H and J to panel C. Use Part Z screws (x4) and Part AF screws (x4) to secure them through the pre-drilled holes.
Step 8
Attach support brackets S (x4) to panel C. Use Part AA screws (x24) to secure them through the pre-drilled holes. Also attach support brackets T (x2) to panel C.
Step 9
Assemble the main body. Connect panel D and panel B to panel E. Use Part Z screws (x4) and Part W screws (x4) to secure them through the pre-drilled holes.
Step 10
Continue assembling the main body. Insert Part Z screws (x4) and Part W screws (x4) into the designated holes to connect internal components and supports.
Step 11
Attach panels G to panel F. Use Part W screws (x4) and Part Z screws (x4) to secure them through the pre-drilled holes.
Step 12
Attach panel A to the main structure. Use Part W screws (x8) and Part Z screws (x4) to secure it through the pre-drilled holes.
Step 13
Attach decorative/drawer front panels L (x2) and M (x1) to the front of the unit. Use Part Y screws (x39) to secure them through the pre-drilled holes. Attach small panels R (x2) using Part P (x1).
Step 14
Attach hinges (Part AB, x6) to panels N (x1). Use Part AC screws (x4) to secure the hinges to the panels.
Step 15
Attach the doors to the main unit. Use Part AD screws (x12) to secure the doors to the hinges.
Step 16
Insert shelf panels K (x3) into the unit. Use Part AE screws (x12) to secure them in place.
Step 17
WARNING! Install the anti-tip restraint (Part AJ). The use of this device may reduce, but not eliminate, the risk of furniture tip over. Follow the instructions on the plastic bag for proper installation.
Optional Door Adjustment
To adjust your doors to make the gaps more even:
- Open the door.
- Adjust the door panels to be flush with the side panel and top panel edge.
- Adjust the gap between the door panel and the side panel.
Replacement Parts & Support
For replacement parts or further assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
Signature Design by Ashley® All Rights Reserved. March, 2022
