Reacher R3 User Manual

1. Plug In

Connect the DC 5V power adapter to the alarm clock and plug it into a power outlet. A diagram shows the alarm clock connected to a wall outlet.

2. Battery Backup

The Reacher R3 uses 3 AAA batteries for backup, primarily to save settings in case of power failure. If the clock is operated solely on batteries, they will drain quickly (approximately 3.5 hours). It is recommended to keep the clock plugged in for continuous operation. A diagram illustrates the battery compartment on the back of the clock, requiring 3 AAA batteries, and the DC 5V input port.

Display Indicators

The clock display shows the time, snooze indicator, AM/PM indicator (for 12H format), auto-off timer indicator, and alarm indicator.

A diagram of the clock face highlights: "Snooze indicator" (top left), "AM/PM indicator in 12H format" (below time), "Auto off timer indicator" (top right), and "Alarm indicator" (below auto-off timer).

Controls and Ports

The Reacher R3 features a volume control knob, screen dimmer button, and a USB charging port.

A diagram of the clock's top and back shows: "Volume control" (knob on top left), "Screen Dimmer" (button on top right), and "USB Charging Port" (on the back, labeled "Charge Your Phone").

Basic Operations Overview

1. Enter Alarm Setting: Press the SET button.
2. Turn Off/On Alarm 1/2: Hold the ON/OFF (Long Press) button for 3 seconds.
3. Set Auto-off Timer: When the sound machine is on, press SET (Short Press).
4. Enter Time Setting: Press the TIME SET button.
5. Soothing Sound Selector: Use the 1-12 SOUNDS button.
6. Turn On/Off Sound Machine: Press the ON/OFF button.
7. Adjust Settings: Use the SET+ and SET- buttons.
8. Snooze: When the alarm goes off, press SNOOZE.
9. Snooze Duration Setting: Hold the SNOOZE button for 2 seconds.

Important Notes

All operations will automatically exit and save settings if no action is taken within 5 seconds.

Always check the "AM" & "PM" indicator when setting time and alarm:

• 12-hour format (default): "AM" appears in the morning, "PM" appears in the afternoon.
• 24-hour format: "AM" & "PM" will not appear.

Time Setting Instructions

To set the time:

1. Press TIME SET to select hour or minute.
2. Press SET+ or SET- to change the selected content.
3. Press TIME SET to confirm the selected content.

Example: If the clock is in 12-hour format, default time is "AM 12:00", but the correct time is "AM 12:30". To correct the minute:

1. Press TIME SET once. "12" will be selected and flash.
2. Press SET- or SET+ until "00" becomes "30".
3. Press TIME SET again to finish setting.

Alarm Setting Instructions

To set the alarm:

1. Press SET to select hour, minute, ringtone, or volume.
2. Press SET+ or SET- to change the selected content.
3. Press SET to confirm the selected content.

Attention:

• Alarm 1/2 setting is similar to time setting. Alarm ringtone settings should be noted.
• When the ringtone is selected, "P01" will flash. Press SET- or SET+ to change ringtones.
• To adjust volume, press the volume wheel (on the back). "U22" will flash, press repeatedly to adjust volume.

Alarm Off/On

To turn off/on Alarm 1/2 completely, hold the SET button for 3 seconds.

Alarm time will appear when the alarm is on. Otherwise, "OFF" will appear.

Snooze Duration Setting

To set the snooze duration:

1. Hold the SNOOZE button for 2 seconds to enter snooze duration setting.
2. Press SET+ or SET- to change the snooze duration (1-15 minutes).
3. Press SNOOZE to confirm.

Alarm Pause/Snooze

When the alarm goes off, there are two options to stop the alarm ringing:

1. Press SNOOZE to get 9 minutes of snooze.
2. Press SET to stop the alarm when it's ringing. The alarm will go off the next day.

If no button is pressed, the alarm will automatically turn off after 30 minutes.

White Noise Sound Machine Setting

To use the sound machine:

1. Press ON/OFF to turn on the sound machine. Press repeatedly to turn off.
2. Press 1-12 SOUNDS repeatedly to change the sounds. There are 12 optional sounds.
3. To adjust the volume, press the volume wheel (on the back). Volume levels range from 0-30.

Auto-off Timer

When the sound machine is on, press SLEEP to select the auto-off timer. "150" will flash. Press repeatedly to choose the timer duration (in minutes).

When the timer is on, press SLEEP once to view the remaining time.

The timer indicator will appear when the timer is on. Otherwise, the timer is off.

Dimmer

Roll the Screen Dimmer wheel (on the back) to adjust the brightness of the display from 0-100.

Restore Factory Setting

To restore the clock to factory default settings, disconnect the power supply and remove the batteries. The clock will restore default settings when plugged into the adapter next time.

Supply and Warranty Information

Reacher provides a 45-day money-back guarantee and a 12-month warranty for products sold in their store.

For 7x12H service, Reacher can be contacted at customer@reachershop.com.