Reacher R2 User Manual and Warranty

For our valued customers:

We would like to thank you very much for your purchase from Reacher. The utmost care has gone into the design and manufacture of your R2. Please read all of these instructions carefully and keep these in a safe place for future reference.

The R2 helps create your baby's perfect sleep environment. It can soothe your baby with any one of its 31 soothing sounds, 8-colors and multiple modes of night light. It is also suitable for children, adults, and senior citizens as it is easy to use and helpful for getting a good night's sleep.

Technical Information

Features

• 31 Soothing Sounds
• 8 Colors Night Light
• 15 Level Adjustable Volume
• Fully Controllable Brightness Adjustment for Nightlight
• Breathing Light
• Sleep Timer
• Earphone/Headphone Jack
• Memory Function

Button Explanation

Timer indicator: Indicates the selected timer setting (1H, 2H, 3H).

Timer/Factory Reset: Press repeatedly to select sleep timer (1H, 2H, 3H). Press and hold for 5 seconds to perform a factory reset.

Light Color: Press to cycle through 8 colors. Press and hold for 1 second to activate the 8 colorful lights mode.

Light On/Off/-: Press to turn the night light on/off. Press again to enter breathing light mode. Press and hold to adjust brightness.

Fan Sounds: Press to cycle through 7 fan sounds.

Power Indicator: Orange LED indicates the R2 is on.

Power On/Off: Press to turn the device on or off.

VOL-: Press to decrease volume.

VOL+: Press to increase volume.

White Noises: Press to cycle through 7 white noises.

Natural Sounds: Press to cycle through 17 nature sounds.

DC5V Power Socket: Connect the power adapter here.

Earphone Jack: Compatible with 3.5mm headset devices.

Setting It Up

Step One: Plug the adapter into a power source (household outlet, PC USB port, USB wall outlet, or car USB outlet).

Step Two: Turn your R2 on by pressing the [power-symbol] button. The orange LED will light up, indicating your R2 is on.

Picking Your Sounds

• Pressing the [sound-bars-symbol] button plays white noise. There are 7 white noises.
• Pressing the [musical-note-symbol] button plays nature sounds. There are 17 nature sounds.
• Pressing the [fan-symbol] button plays fan sounds. There are 7 fan sounds.
• Press the [volume-down-symbol] button to decrease the volume. Press the [volume-up-symbol] button to increase the volume. There are 15 levels of volume, from mute to maximum.

Track List

Note:

• To signal a return to the first White Noise, Fan Sound, or Nature Sound, the machine will play a short ringtone.
• When you increase the volume to the maximum level, you will hear a short jingle.

Picking Your Night Light

• Press the [sun-symbol] button to turn on the night light. Press the button again to enter the breathing light mode, and then again to turn off the night light. In the breathing light mode, the light will gradually change from brightest to darkest, then from darkest to brightest.
• Press and hold the [sun-symbol] button to select the brightness of night light. This will start a cycle between brightest and darkest. When you've reached the desired brightness, just release the button.
• Press the [color-palette-symbol] button to select the specific color desired. Press the button again to cycle to the next color. There are 8 colors: red, yellow, orange, green, cyan, blue, purple and warm white.
• Press and hold the [color-palette-symbol] button for 1 second to turn on the 8 colorful lights. In this mode, the colors automatically cycle from one to the other.
• You can still turn on the night light by pressing the [sun-symbol] button even when your R2 is power off. This is to help you use the night light only without sounds.

Note:

• You cannot adjust the brightness of the light when using the breathing light mode.

Timer and Factory Reset

Using the Timer

• Press repeatedly the [timer-symbol] button to select a sleep timer ranging from 1H, 2H, 3H to enter sleep mode. The LED light of the selected timer will light up accordingly. If you want to leave your R2 on all night, please press the [timer-symbol] button until there is no LED light on.
• When you use the timer, the sound will gradually fade once the preset sleep time comes.

Performing a Factory Reset

• Press and hold the [timer-symbol] button for 5 seconds, your sound, volume and timer settings will go back to the default.

Here are the factory default settings:

• The default sound: Gentle Waves
• The default volume of sound: Level 10
• The default timer: Off

Memory Function

The memory function will save your last sound, light color, light mode, timer, volume, brightness settings when you turn Glows off. Your last settings remain saved when you turn it on next time.

Warning: Please ensure to TURN OFF the machine before unplugging the power adapter, otherwise the machine will not save your last settings.

Using the Earphone/Headphone Jack

The earphone/headphone jack is on the back of the machine, compatible with the 3.5mm headset device.

Customer Support

Your R2 comes with a one year warranty. Your satisfaction is our top priority. If you have any issue with your R2, please contact Reacher at customer@reachershop.com. Reacher will do its best to address your issue within 24 hours. Thank you again for purchasing R2 from Reacher. Sweet dreams!