Starlink Standard Accessories

Description

The Starlink Standard Wall Mount is designed for installation on an exterior wall near the top of the gable or fascia. This wall mount can accommodate a 4" overhang maximum and offers a secure, long-reaching platform to optimize the placement of your Starlink for the best connectivity and performance. Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility in positioning, enabling easy alignment and adjustment to maximize signal reception. Easy to install and adjust, the wall mount comes with all necessary hardware and instructions, simplifying the setup process for a hassle-free experience.

Diagram Description

Diagrams show the dimensions of the Standard Wall Mount: 460 mm (18.1 in) height, 72 mm (2.8 in) width, 246 mm (10.9 in) depth, 155 mm (6.1 in) width, and 70 mm (2.75 in) depth.

Compatibility

Starlink Standard, Starlink Enterprise, 4" Overhang Maximum

Kit Contents

• Wall Mount
• Silicone
• 2x Lag Screws
• 20x Cable Routing Clips

Recommended Tools

• Drill
• 6 mm (1/4 in) Drill Bit
• 9/16 in Hex Socket
• Marker
• Level

Package Dimensions

280 x 470 x 105 mm (1.1 x 18.5 x 4.1 in)

Package Weight

1.6 kg (3.5 lbs)

Description

The Starlink Standard Pivot Mount is perfect for installation on slanted, shingled roofs. Designed for ease of use and flexibility, the Pivot Mount swiveling mechanism enables effortless fine-tuning, adapting to various angles and directions, thus maximizing the performance of your Starlink. Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility in positioning, enabling easy alignment and adjustment to maximize signal reception. The Pivot Mount is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.

Diagram Description

Diagrams show the dimensions of the Standard Pivot Mount: 448 mm (17.6 in) height, 140 mm (5.5 in) width, 235 mm (9.25 in) depth, 223 mm (8.78 in) width, with a 90° angle indicator.

Compatibility

Starlink Standard, Starlink Enterprise

Kit Contents

• Pivot Mount
• 2x Sealant Tape Squares
• 2x Sealant Tape Strips
• 2x Lag Screws
• 20x Cable Routing Clips

Recommended Tools

• Drill
• 6 mm (1/4 in) Drill Bit
• 9/16 in Hex Socket
• Marker
• Level

Package Dimensions

280 x 470 x 105 mm (1.1 x 18.5 x 4.1 in)

Package Weight

1.9 kg (4.2 lbs)

Description

The Starlink Standard Pipe Adapter is designed to attach to any existing pole with a minimum diameter of 31 mm (1.25 in) and a maximum diameter of 63.5 mm (2.5 in). This adaptable and sturdy device allows seamless installation onto a variety of pole sizes, offering flexibility and ease in positioning your Starlink for optimal performance. Crafted from durable, weather-resistant materials, the mount can ensure a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. The Starlink Pipe Adapter is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process. PIPE NOT INCLUDED. ONLY INTENDED TO BE USED WITH METAL PIPES, NOT PVC AND PLASTIC PIPES.

Diagram Description

Diagrams show the dimensions of the Standard Pipe Adapter Mount: 31 mm - 63 mm (1.25 in - 2.5 in) pole diameter range, 213 mm (8.38 in) height, and 558 mm (21.96 in) length.

Compatibility

Starlink Standard, Starlink Enterprise

Kit Contents

• Pipe Adapter Mount
• Allen Key
• 20x Cable Routing Clips

Package Dimensions

250 x 179 x 113 mm (9.8 x 7.0 x 4.4 in)

Package Weight

0.971 kg (2.14 lbs)

Description

The Ridgeline Mount requires no drilling and is designed to sit on the top ridge of a gable roof. Held in place by ballast weights, the mount is ideal when you are unable or unwilling to drill holes in a roof. The mount works great with metal and shingled roofs with slopes less than 45 degrees, but is not recommended for clay tile roofs. With a wind rating of up to 80 kph (50 mph), this mount supports most installation needs.

Diagram Description

Diagrams show the dimensions of the Standard Ridgeline Mount: 612 mm (24.1 in) height, 676 mm (26.6 in) width, with a 0-180° angle indicator.

Compatibility

Starlink Standard, Starlink Enterprise

Kit Contents

• Ridgeline Mount
• 4x Ballast Weights
• 20x Cable Routing Clips

Package Dimensions

Mount: 756 x 656 x 101.4 mm (29.8 x 25.8 x 4.0 in)
Ballast: 424 x 124 x 189 mm (16.7 x 4.9 x 7.4 in)

Package Weight

Mount: 5.8 kg (12.8 lbs)
Ballast: 25.3 kg (55.8 lbs)

Description

The Mobility Mount is designed to create a waterproof seal and protect against water ingress when permanently mounting to wood, fiberglass, metal, plastic and slotted rails on vehicle racks. The Mobility Mount features stainless steel fasteners, which are corrosion resistant to support harsh environments. This durable and versatile mount also supports an 8 degree mounting angle to maintain a signal during extreme and wet weather conditions.

Diagram Description

Diagrams show the dimensions of the Standard Mobility Mount: 140 mm (5.5 in) height, 185 mm (7.3 in) width, and 60 mm (2.4 in) depth.

Compatibility

Starlink Standard, Starlink Enterprise

Kit Contents

• Mobility Mount
• Screwdriver
• 4x Bolts
• 4x Nyloc Nuts
• 4x Lag Screws
• 4x Sealing Washers

Package Dimensions

Mount: 185.5 x 249.9 x 86 mm (7.3 x 9.8 x 3.4 in)

Package Weight

Mount: 880 g (1.94 lbs)

Description

The Standard X-frame Base is designed to support a ground level installation or a quick setup. Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. The Standard X-Frame Base is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.

Diagram Description

Diagrams show the dimensions of the Standard X-Frame Base: 562.3 mm (22.1 in) height, 327.9 mm (12.9 in) width, and 121.7 mm (4.8 in) depth.

Compatibility

Starlink Standard, Starlink Enterprise

Kit Contents

• X-Frame Base
• Mast Adapter
• Mast

Package Dimensions

380 x 640 x 145 mm

Package Weight

2.9 kg (6.4 lbs)

Description

The Standard to Standard Actuated Mount Adapter is designed to attach to an existing mount for Standard Actuated kit, without needing to replace the mount. It is recommended primarily for customers who have an existing mount installed for the standard actuated kit, but need to replace or install the newer Standard kit. The Standard to Standard Actuated Mount Adapter is engineered for easy permanent installation and is accompanied by all necessary hardware including a mast, and user-friendly instructions, ensuring a hassle-free setup process. Note - For customers buying a new Standard kit and looking for a new mount (i.e. who do not have standard actuated mount installed or do not want to reuse it), we recommend buying a mount designed for the Standard kit, instead of this adapter mount.

Diagram Description

Diagrams show the dimensions of the Standard to Standard Actuated Mount Adapter: 38.1 mm (1.5 in) diameter, 231 mm (9.09 in) height, 213 mm (8.38 in) width, and 558 mm (21.96 in) length.

Compatibility

Starlink Standard Actuated Mounts: Short Wall Mount, Long Wall Mount, Pivot Mount, Ground Pole Mount, Ridgeline Mount

Kit Contents

• Pipe Adapter Mount
• Mast Tube
• Allen Key

Package Dimensions

363 x 236 x 113 mm (14.3 x 9.3 x 4.4 in)

Package Weight

1.4 kg (3.1 lbs)

Description

The Standard Roof Rack Mount is designed to attach to varying vehicle roof racks, ranging in thickness from 15 mm (0.59 in) to 44.5 mm (1.75 in), with a maximum width of 95 mm (3.74 in) or roof racks with compatible t-slots. Use your Standard on-the-go, and easily remove your Standard from the roof rack mount when not in use.

Diagram Description

Diagrams show the dimensions of the Standard Roof Rack Mount: 165 mm (6.5 in) height, 95mm-125mm (3.7 in - 4.9in) width, and 185 mm (7.3 in) depth.

Compatibility

Starlink Standard, Starlink Enterprise

Kit Contents

• Roof Rack Mount Base
• Grip Pad
• 4x M8 Flanged Head Screws
• Allen Key
• Screwdriver

Package Dimensions

228.5 x 321.5 x 77 mm (9 x 12.7 x 3 in)

Package Weight

1.6 kg (3.5 lbs)

Description

The Standard Backpack is designed to fit all the components you need to use your Starlink Standard Kit on-the-go, including the Gen 3 router, power supply, provided 5m Standard Starlink Cable and up to a 16" laptop. With a durable and rugged exterior shell, the Standard Backpack keeps your kit protected from the elements when traveling with your Starlink Standard.

Diagram Description

Diagrams show the dimensions of the Standard Backpack: 123 mm (4.84 in) height, 624 mm (24.6 in) width, and 412 mm (16.2 in) depth.

Compatibility

Starlink Standard

Kit Contents

• Standard Backpack
• 5m Standard Starlink Cable

Package Dimensions

670.5 mm x 444 mm x 171 mm (26.4 x 17.5 x 6.73 in)

Package Weight

4.86 kg (10.7 lbs)

Description

The Gen 3 Router introduces WiFi 6 and tri-band radios to Starlink. With improved range, performance, and device support, the Starlink Gen 3 router will extend your WiFi network throughout your home to provide a more consistent and reliable connection with faster speeds and can be purchased to mesh with your existing Starlink router setup.

Mesh Compatibility

Compatible with Starlink Gen 2 router and Starlink Gen 3 router. Not compatible with Starlink Gen 1 routers or 3rd party mesh systems.

Compatibility

Gen 2 Router, Gen 3 Router

Ethernet Ports

Two (2) Latching Ethernet LAN ports with removable cover

Diagram Description

Diagrams show the dimensions of the Gen 3 Router: 120 mm (4.7 in) height, 298.6 mm (11.76 in) width, and 55 mm (2.4 in) depth.

Package Dimensions

361 x 154 x 101 mm (14.25 x 6 x 4 in)

Package Weight

2.7 kg (6 lbs)

Description

The Router Mount is designed to mount the Gen 3 Router directly to a wall or other surface. It is ideal for home or office use when no desk space is available, or for mobility applications where space efficiency is paramount. Once the Router Mount is installed, the Gen 3 Router is easily snapped into place and cable retention ensures the cables are not accidentally pulled out.

Diagram Description

Diagrams show the dimensions of the Gen 3 Router Mount: 132.5 mm (5.2 in) height, 298.6 mm (11.76 in) width, and 66 mm (2.60 in) depth.

Compatibility

Gen 3 Router

Kit Contents

• Router Mount
• 2x Screws
• 2x Drywall Anchors

Recommended Tools

• Drill
• Marker
• #2 Phillips Screwdriver
• 4 mm (5/32 in) Drill bit (no anchors) or 7 mm (9/32 in) Drill bit (wall anchors)

Package Dimensions

250 x 165 x 85 mm (9.8 x 6.5 x 3.3 in)

Package Weight

0.34 kg (0.75 lbs)

Description

The Standard DC-DC Power Supply is designed to power your Starlink Standard directly from a DC power source, removing the need for an inverter when powered from your RV, car, boat or battery pack.

Diagram Description

Diagrams show the dimensions of the Standard DC-DC Power Supply: 93 mm (3.66 in) height, 173 mm (6.8 in) width, and 35.75 mm (1.4 in) depth.

Compatibility

Starlink Standard

Kit Contents

• Standard DC-DC Power Supply
• 1m DC Power Cable

Package Dimensions

254 X 166 X 87mm (10 in x 6.5 in x 3.4 in)

Package Weight

0.99 kg (2.18 lbs)

Description

The Power Supply Mount is designed to mount the power supply directly to a wall or other surface. It is ideal for your home or office use when no desk space is available, or for mobility applications where space efficiency is paramount. Once the Power Supply Mount is installed, the power supply is easily snapped into place and cable retention ensures the input power cable is not accidentally pulled out.

Diagram Description

Diagrams show the dimensions of the Standard Power Supply Mount: 102.4 mm (4 in) height, 181 mm (7.13 in) width, and 48.75 mm (1.92 in) depth.

Compatibility

Standard Power Supply, Standard DC-DC Power Supply

Kit Contents

• Power Supply Mount
• 2x Screws
• 2x Drywall Anchors

Recommended Tools

• Drill
• Marker
• #2 Phillips Screwdriver
• 4 mm (5/32 in) Drill bit (no anchors) or 7 mm (9/32 in) Drill bit (wall anchors)

Package Dimensions

250 x 165 x 85 mm (9.8 x 6.5 x 3.3 in)

Package Weight

0.34 kg (0.75 lbs)

Standard Cable | 15 m (49.2 ft)

The 15m cable is designed to replace the Standard 15m Cable from the Starlink Kit in case of damage or if you need an extra cable outside of your permanent installation.

Compatibility: Starlink Standard

Cable Length: 15 m (49.2 ft)

Package Dimensions: 135 x 50 x 360 mm (5.3 x 2 x 14.2 in)

Package Weight: 1 kg (2.2 lbs)

Standard Cable | 45 m (147.6 ft)

The 45m cable is designed to replace the Standard 15m Cable from the Starlink Kit when additional length is needed between your install location and the router.

Compatibility: Starlink Standard

Cable Length: 45 m (147.6 ft)

Package Dimensions: 89 x 311 x 324 mm (3.5 x 12.3 x 12.76 in)

Package Weight: 2.9 kg (6.4 lbs)