Available to purchase after receiving your order confirmation email.
Designed to attach to any pole with a max diameter of 2.5" (64 mm). Slide adapter over the top of the existing pole, fasten provided screws, and drop Starlink in.
Dimensions: 3.8 cm (1.49") top diameter, 8 cm (3.15") base diameter, 13 cm (5.12") height.
Designed for installation on an exterior wall, near the top of the gable. Drilling required.
Dimensions: 5.1 cm (2") base width, 7 cm (2.77") base depth, 15.3 cm (6.02") height.
Designed for installation on an exterior wall near the top of the gable; extra length provides clearance of overhang when needed. Drilling required.
Dimensions: 42.7 cm (16.8") length, 12.3 cm (4.84") height, 11.3 cm (4.44") depth.
Designed for in-ground installation when roof or wall mounting is not possible; requires digging.
Dimensions: 112.9 cm (44.45") height.
Designed for installation on shingled roofs, recommend installing closer to edge for cable routing. Not recommended for tile, slate, and clay roofing. For best results, Starlink should be installed as close to vertical as possible.
Dimensions: 110 mm (4.3") width, 220 mm (8.66") length, 156 mm (6.14") height.
Designed for installation on shingled roofs, recommend installing closer to edge for cable routing. Not recommended for tile, slate, and clay roofing. For best results, Starlink should be installed as close to vertical as possible.
Dimensions: 381 mm (15") width, 381 mm (15") length, 66.3 mm (2.61") height.
Designed to replace the standard cable from the Starlink Kit in case of damage.
Designed to replace the standard cable from the Starlink Kit when additional length is needed between your install location and the router.
Designed to replace the standard cable from the Starlink Kit when additional length is needed between the Power Supply and the Starlink Router.
Designed to replace the standard cable from the Starlink Kit when additional length is needed between the Power Supply and the RJ45 connector (for third party routers or devices).
Designed to replace the standard cable from the Starlink Kit (between the Starlink and the Power Supply) in case of damage.
Starlink Mesh WiFi Routers wirelessly extend your WiFi network throughout your home to provide a more reliable connection and faster speeds to areas where extra coverage may be needed.
Dimensions: 180 mm (7.08") width, 65 mm (2.55") depth, 254 mm (10") height.
Designed to connect a device directly to the Starlink Router for a wired connection. Supports up to 1 Gbps speeds.
Length: 0.92m (3 ft).
Designed for drilling through most walls. Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.
Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.
 |
Starlink Accessories: Mounts, Cables, and Adapters Guide Explore the range of Starlink accessories, including various mounts (pipe, roof, wall, ground pole), cable routing kits, and adapters designed to enhance your Starlink satellite internet installation. Find specifications, tools needed, and compatibility information. |
 |
Starlink Performance Accessories Guide This guide details various accessories for Starlink Performance, including wedge mounts, flat mounts, pipe adapters, wall mounts, and advanced power kits, along with their specifications and compatibility. |
 |
Starlink Performance Accessories Guide A comprehensive guide to Starlink Performance accessories, including mounts, routers, and cables, designed to enhance your Starlink internet experience. |
 |
Starlink Performance Accessories Guide A comprehensive guide to Starlink Performance accessories, including various mounting solutions, power supplies, and cables designed to enhance connectivity and performance. |
 |
Starlink Flat High Performance Accessories Guide Explore Starlink's Flat High Performance accessories, including Wedge Mounts, Pipe Adapter Mounts, various cables, Mesh WiFi Routers, and Ethernet Adapters for enhanced connectivity. |
 |
Starlink Performance Accessories Guide A comprehensive guide to Starlink Performance accessories, including mounts, adapters, and cables, designed to enhance your Starlink experience. |
 |
Starlink Standard Accessories Guide This guide details various Starlink Standard accessories, including wall mounts, pivot mounts, pipe adapters, ridgeline mounts, mobility mounts, X-frame bases, router mounts, power supply mounts, and cables, designed to enhance and facilitate Starlink installations. |
 |
Starlink Standard Accessories Guide: Mounts, Routers, and Cables Comprehensive guide to Starlink Standard accessories including various mounting solutions for different environments, the Gen 3 Router, Router Mini, a portable backpack, and essential cables. Details compatibility, kit contents, package dimensions, and weight for each item. |