EasyF 4W Splitter 5...2400 MHz 9 dB/7.5 dB

Product Overview

A 4-way Splitter and EasyF connection system designed for SMATV signals, featuring a compact design and efficient electrical behaviour. It is conceived for indoor installation but can also be used outdoors with a protective case (ref. 4177).

A photograph shows the Televes EasyF 4W Splitter. It is a compact, metallic device with a silver-grey finish. On the front, four F-type connectors are visible, arranged in a row. The Televes logo is prominently displayed on the top surface, along with the model number '434202 4D+'.

Features

Other features

Highlights

• EasyF connection system: easy to install, savings on mounting.
• Made of Zamak, providing high shielding.
• Outstanding reliability due to automated manufacturing using new generation micro-components.
• Improves through losses.
• Outstanding electrical behaviour: impulsive noise reduction.
• Grounding screw provided.
• DC pass from the outputs to the input.

Packaging Information

Physical Data

Discover the EasyF Connection System

The EasyF system is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted into the device, significantly improving connection reliability. The absence of traditional F connectors allows for a reduced chassis size and the secure connection of two cables with a single screw.

Simplicity and Savings

• Real time savings: Installation is sped up as there is no need for coaxial cable termination. Screwing connectors onto the device, which can be difficult in tight spaces, is also eliminated.
• Connection reliability: The clamp mechanism securely holds the cables, preventing them from coming loose.
• Cost savings: No additional connectors (neither F nor IEC) are required.
• Space optimization: Inputs and outputs are located on the same side of the device, preventing coaxial cables from bending and making installation easier within cabinets and register boxes.

Very Easy Three-Step Mounting

Mounting involves only screwing and unscrewing the covers to connect both cables:

1. Unscrew the device's cover to access the connection point.
2. Insert the previously stripped coaxial cables.
3. Close the cover and screw to ensure a secure connection.

EasyF System Reliability

With EasyF, the connection between the coaxial cable and the device is made using an automated system for contact insertion of the inner conductor, eliminating the need for soldering. This ensures the device's operating life is increased, as the potential for solder wear over time is removed.

Benefits include:

• Failure rate reduction, typically associated with cold soldering joints.
• Electromagnetic behaviour optimization for high frequencies.
• Commitment to the environment: pollution from welding processes is eliminated, and production power consumption is reduced.

Application Example

A schematic diagram illustrates a typical SMATV signal distribution setup using the Televes EasyF 4W Splitter. The diagram shows a signal source, labeled 'QSD Amplifier' with inputs for 'RF + FI' and an output labeled 'V'. This connects to a 'DAT BOSS 5796' device, which then feeds into a 'STB' (Set-Top Box). From the STB, the signal goes to a 'VLNB' (Variable Low Noise Block) which then connects to the 'Splitter'. The splitter has inputs and outputs labeled 'SAT' and 'TERR' respectively. Arrows indicate signal flow. A note states: 'The DC pass can only go from the outputs to the input.'

Note: Exceeding the indicated value can cause irreversible errors.

Note: The DC pass can only go from the outputs to the input. ?

Technical Specifications: Ref. 434202