August DA383D Portable Freeview HD TV with Built-in DVD Player
Introduction
Thank you for purchasing the August DA383D portable TV. This user manual provides detailed instructions on how to set up, operate, and maintain your device for optimal performance. Please read this manual carefully to familiarize yourself with its features and ensure safe usage.
Safety Information
Storage and Usage
- Keep the device away from extreme heat and cold (operating temperature: 0°C-50°C, storage temperature: -10°C-60°C).
- Keep the device away from moisture, dust, oil, and smoke.
- Do not place the device in unstable containers, as it could be easily damaged.
- Keep the device away from water and dirty environments.
- Avoid dropping the device.
- Do not use sharp objects when handling or cleaning the device.
Maintenance
- Before cleaning, remove all accessories and disconnect the power supply.
- Clean the surface with a soft cloth suitable for LCD TV monitors.
- Do not use aggressive chemicals, powders, or alcohol for cleaning.
Precautions
- Only use the supplied power cable. Failure to do so may damage the device and cause personal injury.
- When the device is not in use, turn it off and unplug the power cable.
Warning
Do not use the TV while driving.
Note
The appearance of bright or dark spots on the LCD screen is a common characteristic of Active-Matrix technology and does not indicate a defect.
Never attempt to repair the device yourself, as this will void the warranty and may cause further damage or personal injury. In case of a defect, turn off the device immediately and contact August International customer service or your dealer.
Main Features
- Supports Freeview and Freeview HD signals.
- Built-in DVD and multimedia player.
- 7-day EPG (Electronic Program Guide) and subtitles.
- HDMI input, AV input, USB port, and Micro-SD card reader.
- Recording capability via USB stick or external hard drive.
Package Contents
- DA383D TV
- Power Cable
- Remote Control
- Flexible Antenna
- HDMI Cable
- AV Cable
- User Manual
Quick Start Guide
- Connect an antenna to the DA383D.
- Connect the DA383D to a power outlet using the supplied power cable.
- Turn on the DA383D using the remote control.
- Use the arrow keys to select the desired language and press
. - Use the arrow keys to select the desired country and press
. - Press
to begin the automatic scan.
Note: To cancel the automatic scan, press
Parts and Functions
Remote Control Functions
- 0-9: Number keys
- VOL+: Volume up
- VOL-: Volume down
- ▲: Up arrow
- ▼: Down arrow
- ◄: Left arrow
- ►: Right arrow
- MENU: Main menu
- SUB-T: Subtitle
- MODE: Select mode
- H/R REC: Record / Pause
- ■ or AUDIO: Stop / Select audio channel or language
- Power: Power on/off
- MUTE: Mute/unmute audio
- RECALL: Return to previous channel
- CH+: Channel up
- CH-: Channel down
- ENTER: Confirm selection
- INFO: Display channel or mode information
- EXIT: Exit menu
- TTX: Teletext
- EPG: Electronic Program Guide
- TV/R: Switch between TV and Radio modes
- ◄ or FAV: Rewind / Access favorites
- ►► or FAV: Fast forward / Access favorites
- Colour Buttons: Red, Green, Yellow, Blue
Device Ports and Buttons
- Volume
- Volume +
- Menu
- Channel
- Channel +
- OK
- Source (Mode)
- LCD Screen
- Indicator Light
- DVD Player Top Cover
- Metal Stand
- Antenna Input
- HDMI Input
- AV Input
- Audio Output
- Power Switch
- DC 12V Input Jack
- Micro-SD Card Slot
- USB Port
Note: The top LED indicator lights green when the device is powered on. The bottom LED indicator lights red when the device is connected to the power adapter and turns green when fully charged.
Connection and Setup
Connecting the Power Cable
- Connect the power cable to the DC IN 12V jack.
- Plug the power adapter into a power outlet.
Connecting Headphones
Connect your headphones to the Aux output. Note: When headphones are plugged in, the device's speakers will be muted.
Connecting to a Source via HDMI
Ensure both the DA100D and the source device are turned off before connecting or disconnecting the HDMI cable.
Connecting to a Source via AV
Ensure both the DA100D and the source device are turned off before connecting or disconnecting the AV cable.
Operation
Startup
- Connect the power adapter to the device and plug it into a power outlet.
- Turn on the power switch on the side of the device. Alternatively, if the device is in standby mode, press the power button on the remote control.
Mode Selection
Press the
Digital TV (DTV)
Automatic Scan
- Press
- Use the navigation keys to select 'Sender' (Channel).
- Select 'Country' and choose your country.
- Select 'Auto Search' and press
to begin scanning for channels.
Blind Scan
- Press
- Select 'Sender' (Channel).
- Select 'Blind Scan' and press
to start the scan.
Channel Manager
The Channel Manager allows you to delete, move, set favorites, and skip channels.
LCN (Logical Channel Number)
To enable or disable LCN, navigate to 'Sender' (Channel) in the menu and toggle the LCN option. For Germany/Austria, it is recommended to disable LCN.
Channel Information
Press
Recall
Press
Subtitles
- Navigate to 'System' in the menu.
- Select 'Subtitle Language' and choose your preferred language.
- Press
to confirm.
Analog TV (ATV)
Automatic Scan
- Press
- Select 'Sender' (Channel).
- Select 'Country' and choose your country.
- Select 'Auto Search' and press
to begin scanning for channels.
Manual Scan
- Press
- Select 'Sender' (Channel).
- Select 'ATV Manual Search' and press
. - Adjust search options as needed and start the scan.
DVD Player
- Open the DVD player cover, insert a DVD, and close the cover.
- Press
and select 'DVD' using the navigation keys, then press .
Media Player
- Connect a USB storage device or insert a Micro SD card.
- Press
and select 'Media Player', then press . - Use the navigation keys to select a media format (Photo, Movie, Music, Text) and browse your files.
Display Settings
Access the 'Display' menu via the main menu to adjust brightness, contrast, color, sharpness, tint, color temperature, and aspect ratio.
Audio Settings
Access the 'Audio' menu via the main menu to adjust audio mode, bass, balance, and surround sound settings.
Time Settings
Access the 'Time' menu via the main menu to adjust sleep timer, auto sleep, time zone, and clock settings. In DTV mode, the time is set automatically.
System Settings
Access the 'System' menu via the main menu to adjust OSD language, audio language, subtitle language, image invert, and perform a factory reset.
Factory Reset
To reset the device to factory settings, navigate to 'Factory Reset' in the System menu and confirm.
Specifications
- LCD Display: 10.1-inch, 1024x600 resolution, 16:9 aspect ratio, 300cd/m² brightness, 800:1 contrast.
- Frequency Range: VHF: 177.5~226.5MHz, UHF: 474~858MHz.
- Decoding Standard: DVB-T, DVB-T2, H.265, H.264, MPEG4, MPEG2.
- Analog TV Format: PAL-I, DK, BG, SECAM-L.
- Analog TV Frequency: VHF: 48.25~160.25MHz, UHF: 464.25~863.25MHz.
- AV In: System: PAL, NTSC, SECAM CVBS, Input: 1.0Vp-p/75ohm.
- HDMI In: HDMI 1.4a (Type A socket).
- Antenna Input: Impedance: 75 Ohm.
- Micro SD Reader: Up to 32GB.
- USB Port: USB 2.0 host (5V, 1000mA).
- Built-in Speakers: 2 x 1.5W, 8 Ohm.
- Power Input: AC 100~240V 50/60Hz, DC 12V/1.5A.
- Battery: Integrated 7.4V/3000mAh Rechargeable Lithium Battery. Charging time: Approx. 4 hours.
- Power Consumption: < 18W.
- Dimensions: 248x174x37.5 mm.
- Net Weight: 773g.
Troubleshooting
- No Picture and Sound: Check power connection. Press and hold the power button for 1.5 seconds.
- No Picture: Rescan channels and check region settings.
- No Sound: Check volume settings. If using headphones, test them on another device. Ensure the cable is securely connected. The Analog TV mode might be selected. Reset to factory settings and try again.
- Picture Freezes, Sound Distorts: Signal is too weak. Check antenna position and consider a signal booster or rooftop antenna. Avoid using the device near motors, trains, or power lines.
- No Signal: Check antenna position and consider a signal booster or rooftop antenna.
- Darkened Picture: Adjust color settings. Incorrect Analog TV format settings may be the cause.
- Snowy Picture / Ants: Signal is too weak. Check antenna position and consider a signal booster or rooftop antenna.
- Display Blinking, No Picture: Check antenna position and consider a signal booster or rooftop antenna.
Warning: Do not attempt to repair the device yourself. Doing so will void the warranty and may cause personal injury. Repairs should only be carried out by authorized personnel.
Warranty
This product comes with a 24-month manufacturer's warranty covering material and workmanship defects. The warranty is valid in the country of purchase and covers the main product, not accessories. It does not cover damage from accidental drops, natural disasters, or unauthorized repairs. Contact customer service before returning the product. The product must be returned in its original packaging with all accessories and a copy of the receipt.
Note on LCD Pixels: LCD displays may have minor pixel defects. August International is not responsible unless there are more than 3 bright or 3 dark pixel errors.
Note on Signal Strength: Ensure adequate signal strength for digital TV reception. A rooftop antenna may be required. August International is not responsible for poor reception due to weak signals.
Customer Service:
Tel: +49 (0) 511 97812978
E-Mail: service-de@augustint.com
Website: https://www.augustint.com/de/
This product complies with the essential requirements of Directive 2014/53/EU.
