August DVB-T205 USB Freeview TV Receiver User Manual

Introduction

Thank you for purchasing this August product. This manual is designed to familiarize you with the product's features and ensure you get the best experience.

Safety

For your safety and the safety of others, please read the Safety Instructions before using this product.

Disposal

Please ensure the product and its accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other applicable regulations. Check with your local authority for regional disposal regulations.

Customer Service

For support, contact August Customer Service Centre: Telephone: +44 (0) 845 250 0586, Email: service@augustint.com.

1. Introduction

1.1 Important Information

It is suggested to use a roof top aerial for the initial scan for TV channels. If a signal is detected, channel information will be saved on your computer. You can then switch to the supplied portable antenna and change location to find the best reception spot.

The included portable antenna is suitable only for areas with very strong signal reception. For reliable reception, especially if living far from a transmitter or in areas with obstructions, a roof top aerial is strongly recommended.

Reception quality may be affected by factors such as proximity to transmitters, tall buildings, thick walls, ceilings, and weather conditions.

Notes:

• This product is portable but not suitable for use when travelling at high speeds.
• When using scheduled recording or time shifting, ensure sufficient hard disk space.
• Improper operation may cause system instability. Follow the user manual and suggested setup. Close all related applications before removing the device.
• August reserves the right to amend the application and its functions. Updated drivers and applications will be available on the August website.

1.2 Features

• Ultra-compact USB2.0 Digital TV Receiver
• Plug & Play, Powered by USB Port
• Universal and Regional Channel Scan
• Time-Shift Recording
• Real-time and Scheduled Recording
• Electronic Program Guide and Subtitles
• Support MPEG1/2/4 and H.264
• Ultra-low power consumption
• Infrared Remote Control

1.3 System Requirements

• CPU: P4 1.4GHz or higher
• RAM: 256MB or higher
• Graphic Card: 32 MB or higher
• Sound Card, CD-ROM, USB2.0 Port
• Operating System: Windows XP/Vista/7/8
• Microsoft Direct X9.0 or higher

2. Hardware Connections

Package Contents:

• USB Freeview TV Receiver
• Portable Antenna with Magnetic Base
• Remote Control
• Software CD
• USB 2.0 Cable
• User Manual

Connection Diagram Description: Connect the USB Freeview TV Receiver to the USB port of your laptop or PC. Connect the TV Receiver to your roof top aerial or the supplied portable antenna.

3. How to Install Driver and Software

3.1 Driver Installation

Step 1: Insert the device into your computer's USB port and connect it to your rooftop aerial as shown in "Hardware Connections".

For Windows 7/8 users: If a notification appears stating that Windows has successfully installed your new device, you can skip to Step 6. Alternatively, use Windows Media Centre to scan for channels. If the driver does not install automatically, proceed to Step 2 to install from the CD. Note: The supplied remote control is designed for Total Media and will not work with Windows Media Centre.

For Windows XP & Vista users: When the "Found New Hardware Wizard" appears, select "Cancel".

Step 2: Insert the software CD. A window will pop up. Click "Driver Install" or run Drivers\Setup.exe from the CD. Note: Do not use this mini disc on a slot loading CD drive. The driver can also be downloaded from www.augustint.com/download.htm.

Step 3: Select your preferred language from the list and click "Next" to continue the installation. (This refers to the language selection screen of the driver installer).

Step 4: Click "Next" to proceed with the installation. (This refers to the welcome screen of the driver installer).

Step 5: Click "Next" to continue. (This refers to the destination location screen of the driver installer).

Step 6: Click "Install" to begin the driver installation. (This refers to the ready to install screen).

Step 7: Click "Finish" to completely install the Driver Software. (This refers to the wizard complete screen). Note: Ensure the device is connected to the computer before installation.

3.2 Software Installation

Step 1: Click "Software Install" from the CD menu.

Step 2: Choose your Setup Language once the Total Media installer begins, then click "OK". (This refers to the language selection screen for the Total Media software).

Step 3: Click "Next" to continue the installation. (This refers to the welcome screen of the Total Media installer).

Step 4: Read the license agreement and click "Yes" to accept the terms. (This refers to the license agreement screen).

Step 5: Enter your desired User Name and the License Key found on the CD paper wallet. Click "Next". Note: Keep the License Key safe, as lost keys cannot be replaced. (This refers to the customer information screen).

Step 6: To change the destination folder, click "Browse", or click "Next" to use the default location. (This refers to the destination location screen).

Step 7: Click "Next" once you have chosen the program folder. (This refers to the select program folder screen).

Step 8: Please wait while Total Media installs. (This refers to the setup status screen showing installation progress).

Step 9: Click "Finish" to complete the installation of ArcSoft TotalMedia software and to start the remote control software installation. You may be prompted to restart your computer.

Step 10: Once the remote control software installation begins, choose your Setup Language and click "Next". (This refers to the language selection screen for the remote control software).

Remote Control Software Installation

Step 11: Click "Next" to continue the installation. (This refers to the welcome screen for the TV IR installer).

Step 12: Click "Install". (This refers to the ready to install screen for the TV IR installer).

Step 13: Please wait while the remote control software installs. (This refers to the setup status screen for the TV IR installer).

Step 14: Select "Yes, I want to restart my computer now" and click "Finish" to complete the installation of the remote control software. Your computer will restart automatically. (This refers to the wizard complete screen).

Finalizing Installation

Step 15: The TotalMedia icon will now appear on your computer's desktop.

Step 16: To verify proper installation, navigate to your Control Panel, select "System" -> "Hardware" -> "Device Manager". You should see four new items listed after the driver installation: HID Infrared Remote Receiver, HID-compliant consumer control device, HID-compliant device, and DVB-T TV Stick.

Note: If these items do not appear in Device Manager, please attempt re-installation.

3.3 More User Instructions

Click "Manuals" to browse this manual as an electronic version, along with manuals for Total Media.

3.4 Arcsoft TotalMedia

For more information about TotalMedia, please click the "?" icon on the menu bar for help, or refer to the manual supplied on the CD, or visit their website at www.arcsoft.com.

4. Remote Control

The remote control has the following functions:

• 1) Mute: On / Off
• 2) 16 Channel Preview: Displays 16 channels at once.
• 3) Screen Mode: Switch between full screen and the default screen.
• 4) Application Control: Open / Close TotalMedia application.
• 5) Numbers 0-9: Direct channel selection.
• 6) Exit: Close the current application or menu.
• 7) Snapshot: Takes a picture of the current screen content.
• 8) Navigation: Up / Down / Left / Right / OK for menu navigation and selection.
• 9) Channel Control: Channel Up / Channel Down.
• 10) Record: Start recording the current program.
• 11) Stop: Stop Recording / Stop Playback.
• 12) Volume Control: Volume UP / Volume Down.
• 13) Time-Shifting: Activate Time-Shifting On / Off.

5. Frequently Asked Questions

5.1 I cannot find any channels after the auto scan.

• Please check the status of the Freeview switchover in your area.
• If you have been unable to use a rooftop aerial, try repositioning the mini-antenna and rescanning, perhaps near a window or on a metal surface, to improve reception strength.
• Ensure the aerial is properly attached to the device.
• Verify that the correct country is selected in the Total Media scan settings.
• Re-scanning with an updated rooftop aerial may help locate the required Freeview signal settings.

5.2 I do not have a roof top aerial, can I use a portable aerial?

You can connect a portable aerial, but a rooftop aerial is advised for the best results.

5.3 The device gets perfect pictures when plugged into my roof top aerial, but no picture at all using the small antenna provided.

The included portable antenna is suitable only for areas with very strong Freeview signal. While some households with a strong signal might be able to use a set-top aerial, reception can still be unreliable. Freeview strongly recommends using a rooftop aerial for good reception. Reception may be affected by proximity to transmitters, tall buildings, thick walls, ceilings, and weather.

5.4 The TV picture keeps freezing and/or some TV channels are missing.

Possible reasons for poor Freeview reception include:

• Local factors such as proximity to transmitters, tall buildings, thick walls, ceilings, and weather.
• A booster may be useful to improve signal strength. If your rooftop aerial is split to serve multiple TVs/Videos, this can weaken the signal.
• If your aerial is old, it may need updating or may have been damaged by weather.
• In some areas, Freeview signals use different frequencies or transmitters than those used for analogue reception.
• Using a set-top aerial may cause difficulties in some regions. As mentioned on the Freeview website, reception can be unreliable even in areas with strong signals, so a rooftop aerial is recommended.

For more information, please visit www.freeview.co.uk/help.

5.5 The Teletext function does not work.

This device is designed for the European standard of digital broadcasting. The UK uses a slightly different broadcast signal, which means Teletext is not available on this unit and is not marketed for the UK.

5.6 There is no light on the device, is it faulty?

There is no operational light on this device. The small window is the IR receiver used by the remote control.

5.7 I can get pictures but no sound.

Please check that your sound card is properly installed and that the volume settings are correct.

5.8 Remote control does not working

• Go to your computer's Control Panel, select "System" -> "Hardware" -> "Device Manager". Check if "Infrared Receiver" is installed. If not, it may show a warning symbol "?". Try reinstalling the driver.
• Check the remote control's battery.
• Ensure you are within 5 meters of the USB TV Receiver and have a clear line of sight.
• The remote control relies on direct line of sight. Ensure nothing obstructs the path between the remote and the USB stick.
• Windows Vista or 7 users can use Windows Media Centre. However, the supplied remote control is designed for Total Media and will not work with Windows Media Centre or other software.

5.9 The TV sometimes freezes or slows down

Freezing while watching TV often indicates a system resource problem, typically when the PC does not meet the recommended system requirements or if the VGA driver is not properly installed or updated. It is also recommended to close all other programs while watching or recording TV.

6. Warranty

This product is guaranteed for twelve months from the date of original purchase. In case of defects due to faulty materials or workmanship, the unit will be replaced or repaired free of charge during this period. An alternative product will be offered if the original is unavailable or irreparable.

Warranty Conditions:

• The warranty is valid only within the country where the product was purchased.
• The product must be correctly installed and operated according to the instructions in this user manual.
• The product must be used solely for domestic purposes.
• The warranty covers the main unit only and does not cover accessories.
• The warranty does not cover damage caused by misuse, negligence, accident, or natural disaster.
• The warranty is void if the product is resold or damaged by inexpert repairs. August disclaims liability for incidental or consequential damages.
• Please consult customer service before returning any product; August is not responsible for unexpected product returns.
• Any faulty product must be returned in its original packaging with all accessories and a copy of the purchase receipt.

The warranty is in addition to, and does not diminish, statutory or legal rights.

Customer Service:

Telephone: +44 (0) 845 250 0586

Email: service@augustint.com

Compliance Information

This product complies with the essential requirements and other relevant provisions of Directive 2014/30/EU. The Declaration of conformity may be consulted online at www.augustint.com/en/declaration.

CE Mark ?