PLUGGLAND
Assembly Instructions
Important Information Regarding Wall Mounting
Screws for fixing the PLUGGLAND board to the wall are not included, as wall materials vary significantly. For advice on suitable screw systems and fixings, please consult your local specialized dealer or hardware store. They can help you choose the correct type of screws and wall anchors based on your specific wall construction.
Assembly Steps
Step 1: Preparation and Marking
You will need the PLUGGLAND board and two (2x) circular components, identified as part number 108200.
Using a pencil ✏️ and a spirit level ?, mark the desired mounting points on your wall. Ensure these marks are level for a straight installation.
Note: Wall mounting screws are not provided. Select screws appropriate for your wall type. If you are unsure, seek advice from a specialist.
Step 2: Mounting the Board
Insert the appropriate screws (not included) through the circular components (washers, 108200) and into the marked points on the wall. Use a drill or screwdriver ? to secure them firmly.
Align the PLUGGLAND board with the secured screws and attach it to the wall.