Gosund ST18 ZigBee Door/Window Sensor

Specifications

Package Contents

• ? Sensor and Magnet
• ? Manual
• ? Screws
• ? Adhesive Strips

Product Overview

The Gosund ST18 is a ZigBee-enabled door and window sensor designed to detect the opening and closing of doors, windows, or other objects. It communicates wirelessly via the ZigBee protocol.

Diagram Description: The main sensor unit is depicted with a center line and an LED indicator. The separate magnet unit is shown. An internal view of the sensor reveals the battery compartment, a reset button, and an 'OPEN' indicator with a downward arrow, showing how to access the batteries.

Pre-use Checklist

• ? A ZigBee gateway is available for configuration.
• ? Your smartphone is connected to a 2.4 GHz Wi-Fi network.
• ? You have entered the correct Wi-Fi password.
• ? Your smartphone must be Android 4.4+ or iOS 8.
• ⚠️ If the number of devices connected to your Wi-Fi router reaches the limit, you may need to free up a channel or use a different Wi-Fi router.

How to Configure

1. Scan the QR code [QR Code Placeholder] or search for the "Gosund" app in the Google Play Store [Google Play Button Placeholder] or App Store [App Store Button Placeholder] to download and install it.
2. Create an account using your mobile number and verification code. The screenshots show the registration process, including entering a phone number and receiving a verification code.
3. Connect your mobile phone to your Wi-Fi router. Click the '+' icon in the top right corner of the home page, or tap 'Add Device', then select 'Wireless Gateway (ZigBee)' from the 'Gateway Control' menu. The screenshots illustrate navigating the app to add a device.
4. Select 'Flashing Fast' mode. Ensure the blue light and red light flash rapidly. If not, press and hold the reset button for approximately 5 seconds until the red light flashes rapidly. The screenshots show the network selection and password entry steps.
5. You can also select 'Slow Blinking' mode. Ensure the red light blinks slowly. If not, press and hold the reset button for about 5 seconds until the red light blinks slowly. Connect your mobile phone to the device's hotspot (e.g., 'SmartLife-XXXX'). Return to the Gosund APP; it will automatically connect to your Wi-Fi router. The screenshots guide through selecting blinking modes and connecting to the device's hotspot.
6. Slide to open the battery compartment cover of the main sensor. Install 2x AAA alkaline batteries in the correct polarity; the indicator will flash.

   Comments: When the batteries are depleted, replace them with alkaline batteries.

7. Click 'Add Sub-Device' in the app. Ensure the indicator is blinking. If not, press and hold the reset button until the indicator blinks. Search for the device and add it. The screenshots show the process of adding a sub-device and confirming its addition.

Installation

The door sensor can be installed on doors, windows, or other objects that can be opened and closed. Before installation, verify the sensor is functioning correctly and ensure the door and frame are positioned so the sensor fits properly.

Mounting Methods:

1. Clean the installation area with a clean, dry cloth. Peel off the adhesive strips from the sensor and press firmly onto the desired location for about 10 seconds to secure them. Note: Adhesive strips are single-use.

   Diagram Description: Shows the sensor and magnet being attached using adhesive strips.

2. Alternatively, attach the sensor using the provided screws.

   Diagram Description: Shows the sensor and magnet being attached using screws and wall anchors.

Caution:

The magnetic part must be placed on the sensor's side, aligned with its center axis. The distance between the sensor and the magnet should be less than 10 mm (approximately 0.4 inches).

Diagram Description: Illustrates the sensor and magnet with a measurement line indicating a distance of '≤ 1 cm'.

EU Declaration of Conformity

Shenzhen Cuco Smart Technology Co., Ltd. hereby declares that the radio equipment type Sensor complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://files.innpro.pl/Gosund

Manufacturer Address: Room 201, 301, Building A, No. 12, Difu Road, Guxing Community, Xixiang Street, Bao'an District, Shenzhen 51800, Guangdong, China

Radio Frequency: 2400-2483.5 MHz
Maximum Radio Frequency Power: 20 dBm

Contact Information

INNPRO
Robert Błędowski
ul. Rudzka 65c
44-200 Rybnik, Poland
Tel: +48 533 234 303
Email: uraz@innpro.pl

Shenzhen Cuco Smart Technology Co., Ltd.
Address: Room 201, 301, Building A, No. 12 Difu Road, Guxing Community, Xixiang Street, Bao'an District, Shenzhen 51800, Guangdong, PR China
Website: www.gosund.net
Email Support: service.eu@gosund.com

Environmental Protection: This symbol [WEEE Symbol Placeholder] indicates that the product should not be disposed of with household waste. It must be handed over to a designated collection point for the recycling of electrical and electronic equipment.

The product complies with relevant EU directives. This document is a translation of the original user manual. The product should be maintained regularly. Improper maintenance may lead to permanent damage. The guarantor is not liable for damages caused by negligence.

Detailed information on warranty conditions is available at: https://serwis.innpro.pl/gwarancja

Compliance Marks: RoHS, CE, PAP [PAP Symbol Placeholder], WEEE [WEEE Symbol Placeholder]