P042-167-KS-811 Zigbee Smart Switch User Manual & Installation Guide
Overview
This document provides instructions for the P042-167-KS-811 Zigbee Smart Switch. The material used is copperplate paper.
Notes Before Installation
- Supports 2.4GHz Wi-Fi networks (IEEE802.15.4 Zigbee).
- Neutral wire is optional.
- Basic electrical wiring knowledge or experience is required. Consult a professional electrician if needed.
- Never connect the neutral wire to any switch wires.
- The ON/OFF button also functions as a reset button. Long-press to reset the smart switch to factory defaults (erasing all settings).
- Applicable only to control lamps; not recommended for other electrical breakers.
Specifications
| Specification | Details |
|---|---|
| Model | KS-811 |
| Power Supply Mode | Neutral+Live Wire or Single Wire |
| Rated Voltage | AC100-240V~, 50/60Hz |
| Load Power | LED Lamp: Max 150W, INC Lamp: Max 600W |
| Wireless Frequency | Zigbee |
| Wireless Standard | IEEE802.15.4 |
| Product Size | 116*75*35MM |
Indicator Light Meaning
| Color | Status | Description |
|---|---|---|
| Blue | Rapidly Blinks | Ready for connection (Default Mode Only) |
| Blue | Off | Light is off |
| Red | On | Light is on |
Installation Guide
Step 1: Turn Off Circuit Breaker
Locate your light's control in the circuit breaker and turn it off. Verify the power is off by attempting to flip your light switch a few times.
Step 2: Find the Neutral Wire and Label Wires
In the wall cassette, look for one or more white wires secured with a wire nut. Determine if a neutral wire is present.
If a neutral wire cannot be found: Please check another wall cassette for a neutral wire. If a neutral wire is still not found, proceed to Step 3 using the single wire connection method.
Step 3: Install Smart Switch
Use wire nuts to connect the switch wires to your home wires according to the diagram. Ensure correct matching of line and load wires. Remove protective stickers, screw the switch into the wall, and attach the faceplate.
Wiring with Live and Neutral Wires:
Connect the Line wire to the 'L' terminal, the Neutral wire to the 'N' terminal, and the Load wire to the 'LOAD' terminal. SAFETY NOTICE: Cut off the power before installation.
Wiring with Single Live Wire:
Connect the Line wire to the 'L' terminal and the Load wire to the 'LOAD' terminal. SAFETY NOTICE: Cut off the power before installation. No neutral wire is required.
Note for Single Live Wire Installation: If the lights flicker, connect a CBB capacitor across the first load terminals. For optimal performance and to prevent bulb flicker, it is recommended to connect resistive loads, such as incandescent lamps, rather than linear fixtures for the L1 load.
Step 4: Turn On Circuit Breaker
Restore power from the circuit breaker. Test the switch by pressing it a few times to ensure it functions correctly.
Step 5: Check the Wi-Fi Light
Tap 'NEXT' when the Wi-Fi indicator light blinks. The indicator light should be rapidly blinking (2 times per second) to confirm it's ready for pairing.
Install the "Smart Life" APP
Step A: Download the App
Search for the "Smart Life" app in the Apple App Store or Google Play, or scan the provided QR code to install it. The app is compatible with iOS 8.0+ and Android 4.4+.
Step B: Register or Log In
Open the "Smart Life" app. If you are a new user, enter your email address or phone number to receive a verification code and register an account. If you already have an account, simply log in.
Step C: Add the Device to Smart Life APP
Network Requirement: Ensure your home network is 2.4GHz, as this smart switch only supports 2.4GHz Wi-Fi and is not compatible with 5GHz networks. Connect your phone to the 2.4GHz Wi-Fi router.
Pairing Mode:
Step 1: Enter Pairing Mode. The indicator LED light will fast flash (2 times per second) by default when the product is first powered on. If the light is in a different state, reset the device by pressing and holding the button until the indicator light flashes quickly.
Adding the Device:
Step 2: In the "Smart Life" app, locate and tap on your Zigbee gateway.
Step 3: Tap "Add subdevice".
Step 4: Confirm the indicator light is blinking rapidly by tapping "LED already blink".
Step 5: Tap "Done" to complete the addition.
Step D: Name the Smart Switch
Assign a name to your smart switch and tap "Completed". The newly named device will appear on the app's home page. Tap the device to access its settings.
Modifying Device Name:
Step 1: Tap the icon in the top right corner of the app.
Step 2: Tap the option to modify the device name.
Step 3: Enter the new name and confirm.
Step 4: Return to the homepage or device control interface to view the updated name.
Step 6 & 7: Device Control
Step 6: Tap to enter the device control interface.
Step 7: The device control interface allows you to manage your smart switch.
