STIGA MCS 470 Li 48 Series & MCS 500 Li D48 Series Battery Lawn Mower Operator's Manual

Introduction

This manual provides essential information for the safe and effective use of your STIGA MCS 470 Li 48 Series and MCS 500 Li D48 Series battery-powered lawn mower. It is crucial to read and understand this manual thoroughly before operating the machine. Keep this manual for future reference.

Safety Instructions

General Safety Precautions:

• Read all instructions before use.
• Do not operate the machine if you are tired, unwell, or under the influence of alcohol, drugs, or medication that may impair your judgment or reaction time.
• Keep children and bystanders away from the operating area.
• Wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, long trousers, and hearing protection.
• Inspect the work area for any foreign objects that could be thrown by the machine.
• Never operate the machine in wet conditions, in the rain, or during thunderstorms.
• Ensure all safety devices are in place and functioning correctly.
• Do not use the machine if any parts are damaged or defective.
• Never carry passengers or other persons on the machine.
• Keep hands and feet away from the cutting mechanism at all times.
• Remove the safety key when the machine is not in use or during maintenance.

Battery and Charger Safety:

• Use only the charger and batteries recommended by the manufacturer.
• Do not expose batteries to extreme temperatures or fire.
• Do not short-circuit battery terminals.
• Charge batteries in a well-ventilated area.

Getting to Know Your Machine

The machine is a pedestrian-controlled lawn mower designed for cutting grass in gardens and lawns. It features a battery-powered motor that drives the cutting mechanism. The operator controls the machine from behind the handle, maintaining a safe distance from the moving parts.

Key Components:

• Chassis (A): Houses the cutting mechanism.
• Motor (B): Provides power for the cutting mechanism and drive system.
• Cutting Mechanism (C): The blade that cuts the grass.
• Handle (D): The operator's control and steering interface.
• Battery (E): Powers the machine.
• Presence Lever (F): Engages the cutting mechanism and drive.
• Traction Lever (G): Engages the drive system for forward movement.
• Safety Key (H): Activates and deactivates the machine's electrical system.

Safety Symbols:

The machine is equipped with various safety symbols to alert the operator to potential hazards. Familiarize yourself with these symbols and their meanings.

Assembly

Follow the instructions in the manual for assembling the handle and any other parts that may not be pre-assembled. Ensure all connections are secure.

Operation

Starting the Machine:

1. Ensure the safety key is inserted and turned to the 'ON' position.
2. Place the battery into its compartment and ensure it is securely locked.
3. Press the start button.
4. Engage the cutting mechanism by pressing the presence lever and then the traction lever (if applicable).

Cutting the Grass:

• Adjust the cutting height according to the grass conditions and desired lawn height.
• Mow in straight lines, overlapping each pass slightly.
• Avoid cutting more than one-third of the grass blade length at a time.
• For best results, mow in alternating directions each time you cut the grass.
• Clean the chassis regularly to prevent grass buildup.

Stopping the Machine:

1. Release the presence lever.
2. Release the traction lever (if applicable).
3. Press the start button to stop the motor.
4. Remove the safety key.

Maintenance

Regular maintenance is essential for the safe and efficient operation of your lawn mower.

• Keep the machine clean, especially the cutting deck and motor area.
• Check and clean the air filter regularly.
• Inspect the cutting blade for sharpness and damage. Replace if necessary.
• Ensure all screws and nuts are tightened.
• Refer to the maintenance schedule in the manual for specific service intervals.

Troubleshooting

If you encounter any issues with the machine, consult the troubleshooting section of this manual. Common problems and their solutions are provided.

Technical Specifications

Accessories

Optional accessories such as mulching kits and batteries may be available. Refer to the manual for compatibility and ordering information.

Disposal

Dispose of the machine, batteries, and accessories in accordance with local regulations. Do not dispose of electrical equipment with household waste.

Declaration of Conformity

This machine conforms to relevant EU directives and harmonized standards. Details are provided in the Declaration of Conformity section.