Transmitter Function Introduction
Transmitter Diagram Overview
The image displays a 2.4GHz remote control transmitter. The key components are labeled as follows: 1. Power Switch (On/Off): Controls the power supply. 2. Steering Wheel: Operates the vehicle's left and right steering. 3. Throttle Trigger: Controls forward, brake, and reverse functions. 4. Power LED: Indicates binding status and battery level. 5. Steering Trim Knob: Fine-tunes the steering for straight-line driving. 6. Steering Angle Rudder Amount Limit: Adjusts the maximum steering angle. 7. Steering Reverse Switch: Reverses the steering servo direction. 8. Speed Gear Switch: Selects between fast, medium, and slow speeds. 9. CH3 Button: Used for switching lamp modes.
Detailed Functions and Operation
- Power Switch (On/Off): Slide to switch the remote control power on or off.
- Steering Wheel: Proportionally operates the car's right and left steering control.
- Throttle Trigger: Pull to accelerate, release to slow down, and push it to brake. Center it and then push it a second time to reverse.
- Power LED: Flashes rapidly during binding. After binding, it stays solid, indicating successful binding. Slow flashing indicates low battery, requiring battery replacement.
- Steering Trim Knob: Used to make fine adjustments for the vehicle to drive straight when it's not doing so naturally. Turning the steering trim knob adjusts the steering.
- Steering Angle Rudder Amount Limit: When turning the steering wheel, use this control to adjust the tire rotation angle.
- Steering Reverse Switch: Allows you to electronically switch the direction of the steering servo travel. For instance, if you move the steering wheel to the right and your vehicle turns left, flip this switch to make it turn right.
- Speed Gear Switch: Speed is divided into fast speed, medium speed, and slow speed. (Beginners are recommended to use slow speed for familiar operation).
- Angel Eye Lamp Mode Switching: Press the "CH3" button once to switch the mode of one lamp.
Vehicle Information
Model: 1/16 Scale RC High-Speed Car
Construction: Made of engineering composite nylon, speedy and durable against accidental collisions. Hobby class equipment.