Instruction Manual
Function Key Description
This section details the key functions of the remote control system.
Exit: Exits the current function or menu.
Camera function: ? Allows the user to capture still images.
Video function: ? Each video recording session lasts for 3 minutes.
Return folder: ? Returns to the directory where video and photo files are stored.
VR function: ?️ Provides a multi-picture display mode.
Lane Assist: Activates a feature that displays two dotted lines in the middle of the screen to help the driver better understand the car's driving trajectory.
Set up: When using the companion APP, click this button to bind the car with your phone, enabling remote control.
Mode switching: ⚙️ Allows switching between one-handed and two-handed control modes for the system.
Throttle control: ⚙️ This button allows selection to control the throttle from 30% to 100%.
Steering control: ☸️ This button allows selection to control the steering ratio from 30% to 100%.
Function Parameter
Basic functions of the car
To access more information, scan the QR codes below:
[QR code for product features video]
[QR code for app download]
- Forward/backward: The car's forward and backward movement can be adjusted proportionally via the APP.
- Turn left/right: The car's turning left and right can be adjusted proportionally via the APP.
- Lighting system: ? Access the APP settings to enable the front headlights to be always on and the tail lights to activate when reversing.
- Self stabilizing function: The car is equipped with a gyroscope for enhanced stability. ?
- Working hours: Approximately 15 minutes of continuous use at the highest grade setting.
Basic parameters of WiFi module
| Parameter | Specification |
|---|---|
| WiFi | 720P 2.4G single antenna |
| Pixel count | 1 million |
| Wide angle | 120° |
| Resolution | 1280x720P |
| Real time image transmission | 1280x720@20FPS, H265 encoding |
| Video recording | App recording 1920x1080@25FPS, MP4 format, H264 encoding |
| Take photos | App shooting 1920x1080, JPG format |
| Working voltage | DC 3.3V-5.5V (maximum instantaneous current can reach 2.0A) |
| Maximum WiFi power | 802.11g@6Mbps 20±2dBM |
| Working temperature | -10°C ~ +70°C |
| Number of allowed links | 1 |
| Link method | Magnetic |
Charging Instructions
Diagram description: The diagram illustrates the charging components of the RC car. It shows the battery type as 3.7V 20C 100MAH [battery symbol ?], an ON/OFF switch [on/off switch ?/?], and a TYPE C CHARGING INTERFACE [USB symbol ?]. The car casing is marked with "MADE IN CHINA" and a "CE" mark. A charging cable connects to the interface.
Battery: 3.7V 20C 100MAH
On/Off Switch: Located on the car body.
Charging Interface: TYPE C CHARGING INTERFACE.
Charging Time: LESS THAN 30 MINUTES.
Charging Indicator: A red light ? on the bottom of the car is illuminated during charging and turns off when the battery is fully charged.
Precautions for connecting to WiFi
To connect to WiFi: Turn on the car switch. Wait for the camera case's green light ? to flash. On your phone, turn on wireless networking, select the car's WIFI account, and enter the password to connect.
(The password is the last 8 digits of the account number.)
Charging precautions
To charge the car: First, turn off the car's power switch. Then, plug in the USB charging cable. The red indicator light ? will remain on during charging and will turn off once the battery is fully charged.
