Hygger HG216 Aquarium Heater User Manual
Thank you for choosing the Hygger HG216 aquarium heater. Please read this manual carefully before use to ensure safe and proper operation.
Important Safeguards
When using this appliance, basic safety precautions should always be followed, including the following:
- Read and follow all instructions.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
- Close supervision is necessary when any appliance is used by or near children.
- Do not operate any appliance if it has a damaged cord or plug, or if it malfunctions or has been dropped or damaged in any manner.
- To disconnect, unplug the appliance from the outlet.
- Do not unplug by pulling on the cord. Grasp the plug, not the cord.
- Do not immerse the entire appliance in water. This heater is submersible.
- Ensure the heater is completely submerged before turning it on.
- Do not use the heater if the glass is cracked or broken.
- Do not operate the heater outside of water.
- The heater should be placed in an area with good water circulation.
- Do not place the heater near flammable materials.
- This appliance is for indoor use only.
- Save these instructions.
Product Description
The Hygger HG216 is a submersible aquarium heater designed to maintain a stable water temperature for your fish tank. It features a durable glass construction and an adjustable thermostat.
Installation and Operation
- Placement: Choose a location in the aquarium with good water flow, away from strong currents or dead spots.
- Submersion: Ensure the heater is fully submerged in the water before plugging it in. The water level should be above the minimum water line indicated on the heater.
- Temperature Setting: Adjust the temperature dial to your desired temperature. Refer to the needs of your specific fish species for recommended temperatures.
- Power Connection: Plug the heater into a properly grounded electrical outlet.
- Indicator Light: The indicator light will illuminate when the heater is actively heating the water.
Maintenance and Care
- Regularly clean the heater to remove any algae or debris buildup. Unplug the heater before cleaning.
- Do not use harsh chemicals or abrasive cleaners. A soft cloth and water is sufficient.
- Periodically check the power cord for any damage.
Troubleshooting
If the heater is not working correctly, please check the following:
- Is the heater plugged in and the outlet working?
- Is the heater fully submerged?
- Is the temperature setting correct?
- Has the heater been recently turned off and on? Allow it to cool down before restarting.
Specifications
Model: HG216
Voltage: 110-120V / 220-240V (depending on region)
Frequency: 50/60Hz
Wattage: 100W
Suitable Aquarium Size: Up to 30 Gallons
Temperature Range: 68°F - 93°F (20°C - 34°C)
Contact Information
For inquiries or support, please contact Hygger Aquarium:
Email: distributor@hyggeraquarium.com
Website: www.hyggeraquarium.com
Hygger Aquarium - Hygger Wholesale
