75CW01 Toy Storage Cabinet Assembly Instructions
This document provides detailed instructions for assembling the 75CW01 Toy Storage Cabinet. Please read all instructions carefully before beginning assembly.
General Guidelines
- Please read the following instructions carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product.
- This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.
Warnings
- Children are not allowed to assemble the product. During assembly, keep small parts out of the reach of children as they may be fatal if swallowed or inhaled.
- Children are not allowed to climb or stand on the product to avoid personal injury caused by the toppling.
- Keep plastic packing bags out of reach of children to avoid any potential danger, such as suffocation.
- Avoid sharp objects and corrosive chemicals to prevent damage to the product or the user.
- Please do not use the product if there are defective and/or missing parts, as this can result in damage or injury.
Notes
- The item is only intended to be used indoors. Personal injury and/or damage to the product may occur if products are used outside of their intended purposes and/or if products have been changed/modified from their original design. The product must be assembled and used in accordance with the provisions of the manual. The seller does not assume any responsibility or liability with respect to any damage caused by incorrect assembly or improper use.
- Do not place it in a damp environment for extended periods of time to prevent mildew.
- During assembly, first loosely align all screws with the corresponding pre-drilled holes and then tighten the screws one by one.
- Periodically inspect screw tightness while the product is in use. If necessary, re-tighten to ensure structural integrity.
Parts List
- Part 1: Side Panel (x2)
- Part 2: Bottom Panel (x1)
- Part 3: Front/Back Panel (x1)
- Part 4: Lid (x1)
- Part 5: Side Panel (x1)
Hardware List
- A: Screw (M8*Ø4*15mm, 20pcs)
- B: Bracket (2pcs)
- C: Hinge Component (1pc)
- D: Allen Key (4mm, 1pc) ?
- E: Ring Handle (52*44mm, 2pcs)
- F: Screw (M4*18mm, 2pcs)
- G: Screw (Ø7*48mm, 14pcs)
- H: Screw Cover (Ø8, 2pcs)
Assembly Instructions
Step 1
Attach Part 1 (x2) to Part 2 (x1) using screws G (x2) and Allen key D.
Step 2
Assemble the main frame by attaching Part 1 (x2) and Part 5 (x1) to Part 2 (x1) using screws G (x6) and Allen key D.
Step 3
Attach Part 3 (x1) and Part 5 (x1) to the assembled frame using screws G (x6) and Allen key D.
Step 4
Attach Brackets B (x2) to the top edges of Part 3 (x1) and Part 5 (x1) using screws A (x8). Then, attach Lid Part 4 (x1) to the brackets using screws A (x16).
Step 5
Attach Hinge Components C (x2) to the front edge of Lid Part 4 (x1) using screws A (x2). Attach the other end of Hinge Components C (x2) to the front panel Part 3 (x1) using screws A (x4).
Step 6
Attach Ring Handles E (x2) to the sides of Part 3 (x1) using screws F (x2).
Step 7
Insert Screw Covers H (x2) into the designated holes on the inside of the cabinet.
