MKSS833 Assembly Instructions
Estimated assembly time: 180 minutes.
Please follow these instructions carefully to ensure safe and correct assembly. Failure to do so may result in danger.
Part Identification
| CODE | DIMENSIONS | Colli -0001 | Colli -0002 | Colli -0003 |
|---|---|---|---|---|
| 021523 | 1518x620x2 | 1 | ||
| 021582 | 1982x818x2 | 1 | ||
| 144658 | 1956x587x15 | 1 | ||
| 144659 | 1956x587x15 | 1 | ||
| 144660 | 1956x587x15 | 1 | ||
| 337230 | 1444x588x15 | 2 | ||
| 337231 | 797x508x15 | 1 | ||
| 337232 | 600x508x15 | 1 | ||
| 337233 | 600x586x15 | 1 | ||
| 42102 | 598x500x15 | 1 | ||
| 633674 | 1950x394x15 | 2 | ||
| 633675 | 1484x594x15 | 1 | ||
| 74806 | 594x221x15 | 2 | ||
| 82035L | 452x140x12 | 2 | ||
| 82035P | 452x140x12 | 2 | ||
| 82338T | 568x140x12 | 2 | ||
| 90866 | 579x448x2 | 2 |
Hardware
| CODE | DESCRIPTION | QUANTITY |
|---|---|---|
| S70969 | Dowel (Ø8x28) | 36x |
| S30212 | Cam Lock (Ø15x12) | 24x |
| S34654 | Screw (Ø4x24) | 6x |
| S31299 | Dowel (Ø1.6x30) | 60x |
| S30337-23 | Dowel | 4x |
| S34676-15 | Support Rail (L=450) | 2x |
| S32892-N | Bracket | 2x |
| S36124 | Hanging Rail (L=791) | 1x |
| S3-S34611 | Hinge | 9x |
| S39450 | Screw | 4x |
| S30106 | Dowel | 5x |
| S31298-14 | Screw (Ø4x14) | 4x |
| S33396 | Connector | 2x |
| S36106 | Dowel | 3x |
| S30211 | Screw | 28x |
| S30157 | Screw (Ø4x30) | 10x |
| S30102 | Cam Bolt (Ø6.3x13) | 8x |
| S30312 | Dowel | 12x |
| S30577 | Shelf Support | 1x |
| S20553N | Shelf Support | 1x |
| S36628 | Bracket (Ø10x50, Ø5x60) | 2x |
| S33652 | Handle (L - 370/(320)) | 5x |
| S36067 | Runner Screw (310x27mm) | 4x |
| S39449 | Cam Lock (Ø12x10) | 4x |
| S30158 | Screw (Ø3x12) | 4x |
| S30142 | Screw (M4x9) | 4x |
| S30544 | Roller | 6x |
Assembly Steps
Step 1
Attach runners (S36067) to panel 144659 using screws (S30102) and dowels (S30106, S36106). Ensure correct orientation as shown.
Step 2
Insert dowels (S70969) and cam locks (S30212) into panels 337232 and 337233. Secure with screws (S30212).
Step 3
Insert dowels (S70969) and cam locks (S30212) into panels 337232 and 337233. Secure with screws (S30212).
Step 4
Join panels 337232 and 337233 to panel 144659. Arrows indicate the direction of assembly. A warning symbol (⚠️) indicates caution is needed.
Step 5
Attach runners (S36067) to panel 144660 using screws (S30102) and dowels (S30106, S36106). Ensure correct orientation.
Step 6
Assemble the main frame by joining panels. Arrows indicate the direction of insertion.
Step 7
Attach internal dividers and supports using screws (S30211) and dowels (S30106) into panel 144659.
Step 8
Insert dowels (S70969) and cam locks (S30212) into panel 337231. Secure with screws (S30212).
Step 9
Join panels. Arrows indicate the direction of assembly. A warning symbol (⚠️) indicates caution is needed.
Step 10
Attach runners (S36067) to panel 144658 using screws (S30106, S33396) and dowels (S30211, S30212, S70969).
Step 11
Join panels. Arrows indicate the direction of assembly.
Step 12
Attach panel 337230. Insert dowels (S30106, S36106) and screws (S30211).
Step 13
Assemble the main structure by joining panels 337230. Arrows indicate the direction of assembly.
Step 14
Attach panel 337230. Use screws (S34654, S30544, S30211). The diagram shows a 180° rotation.
Step 15
Join panels 337230 to form the main structure. Arrows indicate the direction of assembly.
Step 16
Slide back panels 021523 and 021582 into the grooves. Arrows indicate insertion direction.
Step 17
Assemble drawer sides and bases. Use dowels (S31299, S30312) and screws. The diagram indicates that measurements 'a' and 'b' should be equal.
Step 18
Install the hanging rail (S36124) and supports (S30106, S36106) inside the wardrobe. Maximum load for the rail is 25 kg.
Step 19
Attach shelf supports (S30577) inside the wardrobe. Maximum load per shelf is 15 kg.
Step 20
Safety Warning: To prevent furniture from falling over, it must be permanently attached to the wall. Follow wall mounting instructions carefully.
Step 21
Attach hinges (S3-S34611) to panels 633674 (doors).
Step 22
Attach the doors (panels 633674) to the main wardrobe unit using hinges and screws (S30157). Handles (S33652) are also shown being attached.
Step 23
Attach hinges (S3-S34611) to panel 633675 (door).
Step 24
Attach the door (panel 633675) to the main wardrobe unit using hinges and screws (S30157). Handles (S33652) are also shown being attached.
Step 25
Assemble drawer bases 82035L and 82035P using dowels (S39449) and screws (S70969).
Step 26
Assemble drawer base 82338T using dowels and screws (S70969).
Step 27
Join drawer base parts 82035L, 82338T, and 82035P using screws (S39450). Arrows indicate insertion direction.
Step 28
Attach drawer runners to drawer bases using screws (S30211) and part 74806.
Step 29
Assemble drawer fronts/backs (74806, 90866). Use dowels and screws (S34676-15, S30158). Measurements 'a' and 'b' should be equal.
Step 30
Install the assembled drawers into the wardrobe unit. Ensure correct placement and use screws (S30157) and handles (S33652).
Step 31
Install shelves (42102) into the wardrobe. Maximum load per shelf is 15 kg. Use shelf supports (S30337-23).
Important Safety and Care Information
Wall Mounting
Warning: To prevent the furniture from tipping over, it must be permanently attached to the wall. Always check the type and strength of your wall. Select wall plugs and screws appropriate for the wall type. If in doubt, consult a specialist. Installation should be performed by a competent person. If rawlplugs and screws are included, they are intended only for walls made of solid and homogeneous materials.
Furniture Care
For cleaning, use a clean, dry, soft fabric. If thorough cleaning is required, slightly moisten the fabric with water or a furniture cleaning agent, then wipe dry. For metal and glass parts, use commercially available cleaning agents suitable for those materials, following their instructions. Do not use corrosive, abrasive, or unknown agents. Cleaning agents must be clearly marked for furniture use. High-gloss elements, after removing protective foil, can only be cleaned and used after 72 hours.
The furniture may emit small amounts of substances used in production into indoor air. Emissions are tested and meet applicable standards. Regularly ventilate the room where the furniture is placed for about four weeks or until any smell disappears.
