Qolsys IQ4 NS

General Applications

The Qolsys IQ4 NS features the Quectel Wireless module, Model SC650T-NA (FCC ID: XMR2019SC650TNA), providing cellular connectivity across E-UTRA-FDD Bands 2, 4, 5, 7, 12, 13, 14, 25, 26, and 66. This module also supports Wi-Fi 2.4 / 5 GHz and Bluetooth Low Energy 4.2. Integrated main and diversity antennas on the Qolsys MB facilitate these features. Additionally, the IQ4 NS incorporates a Z-Wave module with an EFR32ZG23 modem for Z-Wave device communication in North America, operating at 908.4 MHz, 908.42 MHz, and 916 MHz. Embedded antennas are included and are not designed for removal or modification.

Installation and Operation

The module features three 8-pin receptacle interfaces for connecting to other modules such as PowerG, Zigbee, and other Security Radios. One slot is dedicated to Z-Wave, leaving two additional slots available for optional modules, which will come with their own antennas and FCC licenses.

The integrated Z-Wave operates at 908.4, 908.42, 916, 919.8, and 921.4 MHz, with an output power up to -2.8 dBm. Detailed data and protocol specifications are beyond the scope of this document. For technical specifications, please contact Qolsys.

FCC Compliance (Declaration of Conformity)

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 27 cm between the radiator and your body.

FCC ID: 2AAJXQS-IQP4Z

Tradename: Qolsys

Model Number: IQ4 NS

Industry Canada Statement of Compliance

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC: 11205A-QSIQP4Z

HVIN: IQ4 NS

This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.

The County Code Selection feature is disabled for products marketed in the US/ Canada.

Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 27 cm between the radiator and your body.

Contact Information

US Responsible Party: Qolsys Inc.

Address: 1919 S. Bascom Ave. Suite 600, Campbell, CA 95008 USA

Support: SUPPORT - QOLSYS, 1-855-476-5797