Style Selections 2-Piece Loveseat & Coffee Table Set

Preparation & Assembly

Before beginning assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not attempt to assemble if parts are missing or damaged.

Estimated Assembly Time: 40 minutes

Tools Required: No additional tools required.

CAUTION: Assemble on a soft surface, such as a carpet, to avoid scratching the product. Hand tighten bolts initially, then firmly tighten with the provided wrench (CC) once all bolts are installed.

WARNING: Maximum weight capacity: 500 LBS per chair. This product is intended for single-person seating only. Do not stand on the chair or use it as a step ladder. Use on an even surface only. Improper use may result in injury.

Assembly Tips:

• Tighten each bolt firmly and properly. Do not completely tighten screws until all screws are started.
• Some parts may have sharp edges; wear protective gloves if necessary.
• Children under 16 should not be involved in assembly, removal, or disassembly.
• Children under 10 should be supervised by a competent adult while using the furniture.
• Keep children out of the assembly area.
• This set is heavy; two adults may be needed for safe assembly.
• Never use this product as a support; do not shake, lean, or climb on it.
• Do not overtighten bolts, as this may damage threads.
• Repeated assembly can weaken washer locking ability.
• Periodically check all bolted connections for tightness and security.
• Retain these instructions for future reference.
• Paint may peel if the product is hit or used improperly.

Care and Maintenance

• Before first use, clean the product with a soft, dry towel.
• When not in use, wipe off dirt, wash with mild soap and water, rinse, and dry completely.
• Do not use strong detergents or abrasive cleaners.
• Store the product in a cool, dry location away from sunlight.
• Use and carry this item with care; apply touch-up paint (not included) when necessary.
• This outdoor furniture is designed for personal, non-commercial use.
• Do not locate the product near heat sources.
• Do not place heavy objects on the tabletop.
• This item should not be used as a toy or a tool.

Warranty Information

This warranty extends to the original purchaser and covers defects in materials and workmanship for personal, residential use.

• Frames: 1-year warranty against defects in material or workmanship.
• Cushions, straps, and wicker weaves: 1-year warranty against defects in material or workmanship.

Product Overview

This product is a 2-piece set including a loveseat and a coffee table, designed for outdoor use.

Diagram Description:

The assembly instructions show a step-by-step process for putting together the loveseat and coffee table. Key components include frame parts (A, B, C, D), seat/back cushions (E), and hardware such as bolts (AA, BB), washers (H), and a wrench (CC).

Assembly Steps Overview:

1. Attach side frames (B) to the seat base (A) using bolts (AA).
2. Attach the back frame (C) to the seat base (A) using bolts (AA).
3. Assemble the loveseat frame using bolts (AA) and tighten with wrench (CC).
4. Assemble the coffee table frame using bolts (BB) and tighten with wrench (CC).
5. Place cushions (E) onto the loveseat.
6. Final tightening of all bolts.