Shakti Technology Electric Pressure Washer

User Manual

Thank You for Choosing Shakti Technology

Please read the owner's manual and safety instructions carefully before operating the electric pressure washer. Save this manual for future reference.

Read Manual Carefully Before Using

Product Description

This high-pressure electric power washer is intended for residential use to clean vehicles, machines, buildings, facades, etc.
Never use the machine in potentially explosive areas under any circumstances!
Do not use water that is dirty, gritty, or contains any chemical products, as these could impair operation and shorten the life of the machine.
This unit can be placed horizontally. Do not step on when placed horizontal.

Technical Specification

Specification	S3	S5	S7
Motor	1800 W	1900 W	2100 W
Max Flow Rate	06 L/min	08 L/min	10 L/min
Rated Pressure	120 Bar	125 Bar	130 Bar
Voltage	220-240 V	220-240 V	220-240 V

Know Your Product

The following components are included:

1: Inlet Pipe
2: Water Bucket Filter
3: Inlet Quick Connector
4: Inlet Crystal Filter
5: Outlet Pipe
6: Pressure Gun
7: Soap Dispenser
8: Main Unit
9: Extension Rod

Note: All details will remain same for S3 & S7 Models.

Main Unit Components:

Carrying Handle
Pressure Gauge
Water Inlet
Water Outlet
On / Off Switch

What's in the Box

Electric pressure washer
Pressure gun
Outlet Hose Pipe
Inlet Pipe
Needle clean-out tool
Inlet Filter Set
Soap Dispenser
User's manual

Important! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!

Assembly Instructions

Attach one end of the inlet pipe with the tap connector.
Push and attach the inlet connector with the inlet filter.
Connect another end of the outlet hose pipe with the gun.
Attach another end of the inlet pipe with the inlet connector.
Turn ON the machine. Release the water for a few minutes to release the air inside (without the outlet pipe connected).

Ensure the inlet filter is straight and the inlet connector is not bent.

Operating Instructions

When washing, especially with high pressure, ensure sufficient distance between the nozzles and the object to avoid damage.
If the machine is not used for more than 5 minutes, turn off the machine and press the gun trigger to release the pressure.
The working pressure of the machine is set from the factory and should not be adjusted higher by the user, as this may damage the machine.
It is normal for some water drops to appear from the water discharge holes in the pump juncture during operation.
To stop the machine, follow these steps:
1. Switch off the machine.
2. Pull the plug off from the socket.
3. Cut off the water supply (if supplied from the tap).
4. Press the trigger of the spray gun to release the pressure.
Accessories like the gun and hose are crucial for performance; take care of them at all times.
If the motor does not work, turn it off immediately to prevent it from burning out.

Maintenance

Replace Engine Oil Regularly (Oil grade 15W-40):
- After the first 20 hours of working, the engine oil must be replaced (60-70ml oil can be filled).
- Replace the oil a second time after another 50 hours of working, and then regularly after every 100 hours of working.
Turn off the machine when performing maintenance.
If the machine will be stored for a long time, drain all water from the pump. Keep the machine in a dry and well-ventilated condition.
If the water source is not very clean, clean the filter net regularly.

Troubleshooting

Problem	Cause	Possible Solution
The motor won't run or stops running when it is working.	1) No power supply or poor connection between the plug and socket. 2) The switch or remote control switch may be broken, or the battery depleted. 3) The voltage of the power is too low. 4) Crankshaft and connecting rod lubrication is poor. 5) The capacitor is broken.	1) Examine the power supply and ensure the plug & socket are well connected. 2) Repair or replace the switch, or replace the battery. 3) Consult with the electric supply provider. 4) Detach the fan cover from the motor and turn the motor around. If it still doesn't work, contact an agent for repair. 5) Contact an agent to replace the capacitor.
The nozzle cannot spray water or sprays water at low pressure.	1) Nozzle is clogged. 2) The check valve is closed. 3) There is air in the hose. 4) Water seal is worn off. 5) The filter net is clogged.	1) Clear the nozzle. 2) Run the pump with the water tap as water supply for some minutes or clean the check valve. 3) Ensure a firm connection of the water inlet hose to eject air. 4) Replace the water seal. 5) Clear the filter net.
Pressure unloads.	1) Pressure valve is leaking water. 2) Pressure loader is clogged. 3) Mushroom nail is worn off. 4) Connection between gun and hose is leaking or the gun is leaking.	1) Replace some O-rings or go to an agent for repairs. 2) Clear the pressure loader. 3) Replace the mushroom nail. 4) Tighten the connection or replace the gun.
Water leaking on the pump.	1) Supporting ring is worn off. 2) Water seal is worn off. 3) Plunger is worn off.	1) Replace the supporting ring. 2) Replace the water seal. 3) Replace the plunger.
Oil leaking on the pump.	1) Some O-ring is worn off. 2) Oil seal is worn off. 3) Too much oil added to the crankshaft case. 4) Air vent is clogged.	1) Replace some O-rings. 2) Replace the oil seal. 3) Drain some oil until the oil level is in the middle or 2/3 level of the oil window. 4) Clear the air vent.
When the spray gun is stopped, the pressure does not return to zero but rises and falls continuously.	1) Returning valve damage on the outlet pump side.	1) Replace the returning valve.

Recycling Information

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

Do not dispose of this product with normal household waste, but take it to a collection point for the recycling of electrical and electronic equipment. This is indicated by the symbol on the product, user manual, or packaging. By re-using, utilizing materials, or otherwise recycling old appliances, you make an important contribution to protecting our environment.

Contact Us

Shakti Technology
Rajkot, Gujarat (India).
+91 9909084777
+91 9558285760
service@shaktitool.com
www.shaktitool.com