Welcome Guide • English

Important Safeguards

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

• This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.
• The product will need adjustment after installation is complete.
• Do not exceed maximum listed weight capacity of 20 lbs (9.1 kg) for each display. Serious injury or property damage may occur.
• Because mounting surface materials can vary widely, it is imperative that the mounting surface is strong enough to handle mounted product and equipment.
• Ideal distance between the viewer and the display depends upon the location and set up of the product. Adjust the distance to no less than 450mm and no more than 800mm from the viewer, based on comfort and ease of viewing.

Important, Retain for Future Reference: Read Carefully

Before First Use

• Check for transport damages.

⚠️ DANGER Risk of suffocation! Keep any packaging materials away from children - these materials are a potential source of danger, e.g. suffocation.

Cleaning and Maintenance

Cleaning

• To clean, wipe with a soft, slightly moist cloth.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

• Check the components regularly to make sure all screws and bolts are tightened.
• Store in a cool and dry place away from children and pets, ideally in original packaging.
• Avoid any vibrations and shocks.

Warranty Information

To obtain a copy of the warranty for this product:

• US: amazon.com/AmazonBasics/Warranty
• UK: amazon.co.uk/basics-warranty
• US: +1-866-216-1072
• UK: +44 (0) 800-279-7234

Feedback and Help

AmazonBasics is committed to delivering customer-driven products that live up to high standards. Customers are encouraged to write a review sharing their experiences with the product.

• US: amazon.com/review/review-your-purchases#
• UK: amazon.co.uk/review/review-your-purchases#
• US: amazon.com/gp/help/customer/contact-us
• UK: amazon.co.uk/gp/help/customer/contact-us

Product Overview and Components

The AmazonBasics Dual Side-by-Side Monitor Display Mounting Arm, model B07QNY2D3H, is designed to mount two monitors. The product includes various components for assembly, and users can scan a QR code on the product packaging to find helpful assembly, installation, or use videos.

Included Components:

• A: Monitor arm assembly (2 units) - VESA 100x100mm and 75x75mm compatible.
• B: Desk clamp base (2 units)
• C: Pole with clamp (1 unit)
• D: Base plate (1 unit)
• E: Cable management clips (2 units)
• F: Grommet base (2 units)
• G: M3x6mm screw (1 unit)
• H: M4x10mm screw (8 units)
• I: M4x10mm screw (8 units)
• J: Cable ties (4 units)
• K: 4mm Allen wrench (1 unit)
• L: 2.5mm Allen wrench (1 unit)
• M: M4x10mm screw (8 units)
• N: M3x6mm screw (2 units)

Tools needed: Phillips head screwdriver, Allen wrenches (included).

Assembly Instructions

Step 1A: Desk Clamp Installation

To install using the desk clamp method:

1. Attach the pole with clamp (C) to the desk clamp base (B).
2. Position the clamp assembly on the edge of the desk.
3. Tighten the clamp to secure the arm to the desk. Adjust the clamp for desk thickness: for thin desks, the clamp can be set to ≤ 63mm (16mm); for medium desks, 5" - 1.63" (11-41mm); and for thick desks, 1.42" - 2.6" (36-66mm).

Step 1B: Grommet Base Installation

To install using the grommet base method:

1. Attach the pole with clamp (C) to the grommet base (F).
2. Insert the pole through the desk grommet hole.
3. From underneath the desk, secure the base plate (D) using the M4x10mm screws (H) and the 4mm Allen wrench (K).
4. Ensure the desk thickness for grommet installation is between 0.31" - 2" (8-51mm).

Step 2: Determine Monitor Orientation

Monitors can be mounted in a locked portrait or landscape orientation, or left free to rotate 360°.

• For free rotation (360°): Do not insert the M3 x 6 mm screw (N).
• For locked orientation (0°): Insert the M3 x 6 mm screw (N) into the front of the plate on the upper arm.

⚠️ NOTICE: If changing monitor orientation after mounting, remove the monitor from the upper arm, then insert or remove the M3 x 6 mm screw.

⚠️ DANGER: The arm mechanism is under tension and will move up rapidly when equipment is removed. Do not remove equipment unless the arm is moved to its highest position to prevent serious personal injury or equipment damage.

Step 3: Attaching the Monitor Arm to the Pole

1. Slide the monitor arm (A) onto the pole (C).
2. Secure the arm to the pole by tightening the M4x10mm screws (I) using the 4mm Allen wrench (K).

Step 4: Attaching the Monitor to the Arm

1. Attach the VESA plate of the monitor arm (A) to the back of the monitor.
2. Secure the monitor using the M4x10mm screws (M) and the 4mm Allen wrench (K). Ensure the monitor is securely fastened.

Step 5: Cable Management

1. Route the monitor cables along the arm.
2. Use the provided cable management clips (E) and cable ties (J) to neatly secure the cables to the underside of the arm.

Step 6: Adjustments

1. Tilt Adjustment: Adjust the tilt of the monitor by using the 4mm Allen wrench (K) to tighten or loosen the pivot point on the monitor arm.
2. Height Adjustment: Adjust the height of the monitor arm on the pole by loosening the clamp, moving the arm to the desired height, and then re-tightening the clamp.
3. Swivel and Rotation Adjustment: Adjust the arm's swivel and rotation at the joints using the 2.5mm Allen wrench (L) to tighten or loosen as needed.