AmazonBasics Heavy Duty Non-Slip Bed Frame with Steel Slats, Easy Assembly
AmazonBasics
Product Overview
This document provides assembly instructions and specifications for the AmazonBasics Heavy Duty Non-Slip Bed Frame with Steel Slats. The bed frame is designed for durability and ease of assembly, featuring steel slats for support and a non-slip design.
The product is available in multiple sizes: Twin, Queen, King, and California King, with corresponding model numbers: B086VNNCMZ, B086VLQ6WF, B086VNNCNG, B086VNR87F.
Important Safeguards
Read all instructions carefully and retain them for future reference. If the product is passed to a third party, these instructions must be included.
- For domestic indoor use only.
- Assembly should be performed by a competent adult. Consult a professional if in doubt.
- Keep children away during assembly and installation.
- Regularly verify that all components and fasteners are secure. Do not overtighten fasteners.
- Regularly examine the product for wear and tear. Stop use at the first sign of damage or detached parts.
- Always use the product on a firm, level ground.
- Assemble the product on a soft surface, such as carpet, to avoid scratching the floor.
- Do not walk, stand, or jump on the product.
- The product is intended for 2 users, each up to 350 lbs (158 kg).
Before First Use
- DANGER: Risk of suffocation! Keep all packaging materials away from children.
- Check the product for transport damages.
- Remove all packing materials.
Cleaning and Maintenance
Cleaning
- Clean the product by wiping it with a soft, slightly moist cloth.
- Never use corrosive detergents, wire brushes, abrasive scourers, or sharp utensils.
Maintenance
- Regularly check that all components and fasteners are tightened.
Specifications
| Asin | Twin (Full) | Queen | King | Cal King |
|---|---|---|---|---|
| Net weight | approx. 38.8 lbs (17.6 kg) | approx. 41.23 lbs (18.7 kg) | approx. 45.86 lbs (20.8 kg) | approx. 44.97 lbs (20.4 kg) |
| Dimensions (W x H x D) | approx. 74.6 x 53.5 x 18.1 in (189.5 x 136 x 45.9 cm) | approx. 79.5 x 59.4 x 18.1 in (202 x 151 x 45.9 cm) | approx. 79.5 x 75.6 x 18.2 in (202 x 192 x 45.9 cm) | approx. 83.5 x 71.7 x 18.1 in (212 x 182 x 45.9 cm) |
| Maximum user weight | 2 users up to 350 lbs (158 kg) each | |||
Feedback and Help
AmazonBasics is committed to delivering customer-driven products that meet high standards. Customers are encouraged to write reviews sharing their experiences.
Assembly Instructions
Step 1: Prepare Components
Identify all parts before beginning assembly. The following components are included:
- A (x 1)
- B (x 1)
- C (x 2)
- D (x 1)
- E (x 2)
- F (x 20)
- N (x 2)
- W (x 1)
- X (x 1)
- Y (x 1)
- Z (x 1)
- 1 (x 2) - M8 x 15 mm
- 2 (x 18) - M8 x 15 mm
- 3 (x 6) - M8 x 35 mm
Diagram showing parts A, B, C, D, E, F, N, W, X, Y, Z, 1, 2, 3.
Step 2: Assemble the Frame Base
Connect the side rails (A, B) to the legs using fasteners.
Diagram showing assembly of side rails and legs with fasteners.
Step 3: Attach Center Support
Attach the center support beam (D) to the frame.
Diagram showing attachment of center support beam.
Step 4: Install Slats
Place the steel slats (F) across the frame, securing them with fasteners.
Diagram showing placement and securing of steel slats.
Step 5: Final Touches
Peel off the non-slip tape and apply it to the designated areas.
Diagram showing peeling and application of non-slip tape.
Product Information
Made in China.
For more information, visit amazon.com/AmazonBasics.
