ACTIVESHOP

Importer Information

Company: ACTIVESHOP Sp. z o.o.

Address: 8b Graniczna St., building DC 2a, 54-610 Wroclaw, Poland

Website: www.activeshop.com.pl

[CE certified]

Technical Data

Construction and Mounting of HD-M6X Lamp

Step 1: Base and Tripod Assembly

Screw the lower part of the tripod (Part D) into the base. Then screw the upper part of the tripod (Part C) into the lower part (Part D).

Diagram Description: Shows the base (Podstawa), Part D (lower tripod), and Part C (upper tripod) being assembled. Part A and Part B are also shown, related to the lamp head.

Step 2: Mounting the Lamp to the Tripod

• Loosen the mounting screw.
• Pull Part B out of Part C.
• Twist Part A with Part B.
• Insert Part B into Part C.
• Tighten the mounting screw.
• Connect the cables to provide power.

Diagram Description: Illustrates the lamp head assembly (Parts A, B) being attached to the tripod arm (Part C). Numbered steps indicate the sequence of actions.

Note: Positioning the lamp nicely over the tripod foot provides the most stability for the lamp.

Construction and Installation Method of HD-M3X Lamp

Assembly Steps:

1. Screw the lamp into the top of the tilting arm.
2. Install the cable in the special guide brackets.
3. Mount the lamp stand to the mounting bracket.
4. Connect the lamp to the tripod.
5. Connect the power cord to the power supply.

Diagram Description: Shows the lamp head, tilting arm (Uchylne ramię), controller (Pilot), stand (Statyw), and mounting bracket (Uchwyt mocujący) components of the HD-M3X lamp. Arrows indicate assembly points.

Note: It is possible to adjust the stiffness of the joints of the tilting arm with an Allen wrench. After prolonged or intensive use, excessive joint play may occur. Improve rigidity by tightening the mounting screws.

Attention: Do not over-tighten the screws. There is a risk of damaging the lamp arm when the fixing screws are over-tightened.

Controller Operation:

Diagram Description: Depicts the remote control unit with buttons for brightness adjustment, power, and color temperature.

• Increase brightness: ➕
• Decrease brightness: ➖
• Power on/off button: ?
• Change lighting mode: ?
• Warm/Cold color (optional button): ?
• Cold color: ❄️
• Warm color: ☀️

Notes:

• The remote control is optional in some models.
• The light mode change button is optional on the lamp controller in some models.

Security Measures

1. The device is professional equipment for use in beauty parlors. Operation by qualified cosmetic personnel avoids undesirable consequences during treatment.
2. Do not disassemble the device or attempt to use it for purposes other than those indicated in this manual. All servicing and repairs must be performed only by an authorized service technician (ACTIVESHOP SP. Z O.O. company).
3. Do not install or operate the device near liquids, wet places, or with wet hands to prevent liquids from entering the device.
4. Immediately unplug the device from the outlet and contact authorized service in the following cases:
   • (a) liquid has entered the device,
   • (b) the device emits a strange odor, smoke, or makes strange sounds,
   • (c) the power cord has been damaged,
   • (d) the device has been knocked over or its housing has been damaged.
5. Do not put any objects on the cables. Do not install the device where someone may step on the power cord.
6. For safety purposes, unplug the power cord from the outlet every time you finish working with the device.
7. Do not insert anything into the opening of the device. If a foreign object gets into a hole, remove the cord from the outlet and contact the distributor or manufacturer.
8. Do not place the device on an unstable cart, shelf, or vehicle. If dropped, the device may be damaged.
9. To guarantee the established useful life of the device, it is recommended to keep an interval of one minute before pressing the power button again (between switching on and off).
10. The power supply must comply with the specifications on the nameplate. Otherwise, there is a risk of incorrect operation, damage, or burning of the device.

Caution

1. In case of damage to the power cord or other malfunctions, contact an authorized service center to avoid danger.
2. This device can be used by children at least 8 years old and by people with reduced physical and mental capabilities, and those with inexperience, if supervision or instruction on safe use is provided, so that associated risks are understood.
3. The equipment is not intended for play by children. Do not allow children to play with the equipment.
4. Do not leave the equipment unsupervised when children or persons without sufficient knowledge of its use are nearby.
5. This electrical appliance is not a toy. Incorrect use or contact may pose a health risk or lead to death; use and store the appliance out of the reach of children.

Disposal of the Device

Dispose of used electrical appliances, fixtures, and packaging at raw material reprocessing centers in accordance with environmental protection principles. Do not dispose of electrical appliances in household waste containers. Follow the rules for discarding this type of equipment.

To protect the environment in accordance with Directive 2012/19/EC on waste electrical and electronic equipment, waste electrical and electronic equipment should be collected separately and sent to collection centers.

At the end of their useful life, old appliances contain recyclable components and should be handed over for reprocessing. Therefore, they should be delivered to appropriate collection points or to ACTIVESHOP SP. Z O.O.

[disposal icon]

Storage and Transport

The device should be transported at temperatures between -20 °C and +50 °C only in its original packaging. Store the device in a well-ventilated area with a relative humidity of no more than 75%. Operating temperature is from +10 °C to +40 °C. During storage and transportation processes, the device must not be thrown, dropped, or exposed to mechanical shocks or atmospheric agents.

Temperature Range: ?️ -20°C to +50°C (transport), +10°C to +40°C (operation)

Max Relative Humidity: ? 75%

Transport: ? Use original packaging.

Caution: ⚠️ Avoid shocks, drops, and atmospheric agents.