Philips Smartbright RC048B LED Direct Panel Mounting Instructions
Product Overview
The Philips Smartbright Direct Panel RC048B is a versatile LED luminaire designed for efficient lighting. This document provides mounting instructions and technical specifications.
Technical Specifications
Type | Dimensions (mm) L×W×H | CCT (K) | Power (W) | Lumen Output (lm) | Voltage | Frequency | Weight (kg) |
---|---|---|---|---|---|---|---|
RC048B LED38S/865 PSU W60L60 2IN1W PCV | 595×595×34 | 6500 | 42 | 3800 | 220-240 | 50/60Hz | 1.8 |
RC048B LED38S/865 PSU W30L120 2IN1W PCV | 295×1195×34 | 6500 | 42 | 3800 | 220-240 | 50/60Hz | 1.9 |
RC048B LED38S/840 PSU W60L60 2IN1W PCV | 595×595×34 | 4000 | 42 | 3800 | 220-240 | 50/60Hz | 1.8 |
Compliance: IEC 60598, IP20 rated, suitable for 25°C ambient temperature.
Mounting Options
A. Visible Profile Ceiling Mounting (VPC)
This method is for installation into standard suspended grid ceilings. The panel is designed to fit directly into the ceiling grid opening.
Cutout Size:
- W60L60: 580x580 mm (+/-2 mm)
- W30L120: 280x1180 mm (+/-2 mm)
- W60L120: 580x1180 mm (+/-2 mm)
Ceiling Thickness: 8mm - 16mm
B. Plaster Ceiling Version Mounting (PCV)
This is a recessed mounting method for plaster or solid ceilings. It requires cutting a precise opening in the ceiling. The panel, with a depth of 60mm, is then inserted and secured.
Required Accessories:
- Plaster ceiling set (12NC: 911401824580, RC048Z SMB-PLC)
- Suspension set (12NC: 911401824680, RC048Z SME-2)
Fasteners: Requires 8x ST3.2 screws and 4x 3.5x6.5 screws for mounting.
C. Suspension Mounting (SUS)
The panel can be suspended using wires. The diagram shows attachment points on the panel. Suspension wires are not included and must be ordered separately (12NC: 911401824680, RC048Z SME-2). The suspension height can be adjusted from approximately 100mm to 1450mm.
D. Surface Mounted Set
A surface mounting frame is available for installations where the panel is not recessed or suspended. Available for W60L60 (12NC: 911401867182, Panel SMB W60L60 H7) and W30L120 (12NC: 911401867282, Panel SMB W30L120 H7).
Safety Cable
It is recommended to install a safety cable for added security. The diagram illustrates how to attach the cable. The safety cable is not included and can be ordered separately (12NC: 911401824780, RC048Z SC).
Wiring Method
Connect the luminaire using appropriate wiring. The diagram indicates connections for Live (L - Brown wire) and Neutral (N - Blue wire). Ensure the use of 2x 0.75mm² wires. A terminal box with IP20 or higher rating (minimum dimensions 10x20x25mm) is required for connections but is not included in the package.
Important Safety and Usage Instructions
Please read these instructions carefully before using the product.
- For indoor use only.
- Do not switch on the luminaire before completing the installation.
- Installation must be performed by a qualified electrician in accordance with the latest electrical regulations.
- If the external flexible cable or cord of this luminaire is damaged, it must be replaced by the manufacturer, their service agent, or a similarly qualified person to avoid a hazard.
- The luminaire must not be covered with thermal insulation or similar material under any circumstances.
- The light source contained in this luminaire shall only be replaced by the manufacturer, their service agent, or a similarly qualified person. The entire luminaire must be replaced when the light source reaches the end of its life.
- The luminaire complies with IEC 60598.
- Avoid use or storage in corrosive atmospheres or environments containing hazardous materials such as sulfur, chlorine, or phthalates.
Environmental Disposal Information
The symbol [recycle symbol] indicates that this product should not be disposed of with other household wastes throughout the European Union. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.