Philips Ledinaire Panel
Model: SM065C
Variants:
- SM065C 41S/840 PSU W60L60 NOC
- SM065C 41S/840 PSU W60L60 OC 4PK
- SM065C 41S/840 PSU W60L60 NOC 4PK
Product Specifications
| Model | Lumen (lm) | CCT (K) | P(W) | IK | Energy efficiency class | Dimensions (LxWxH mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| SM065C 41S/840 PSU W60L60 NOC | 4100 | 4000 | 34.0 | 02 | D | 595x595x40 | 1.6 |
| SM065C 41S/840 PSU W60L60 OC 4PK | 4100 | 4000 | 34.0 | 02 | D | 595x595x40 | 1.9 |
| SM065C 41S/840 PSU W60L60 NOC 4PK | 4100 | 4000 | 34.0 | 02 | D | 595x595x40 | 1.6 |
General Characteristics:
- Light Source Energy Efficiency Class: D
- Rated Life: 50,000 hrs (@L80), 75,000 hrs (@L70)
- Operating Temperature: Min. -10 °C, Max. 35 °C
- Glow Wire Test: 650 °C
- Mounting Type: Surface mounted
- Installation Hole Template Included [quantity 1]
Installation Instructions
The following steps describe the surface mounting installation process:
-
Step 1: Preparation
Use the included installation hole template [quantity 1] to mark the mounting positions on the surface. Ensure the surface is stable and suitable for the luminaire.
-
Step 2: Mounting Brackets
Attach the mounting brackets to the prepared surface using appropriate fixings. The diagram shows brackets being secured to a surface.
-
Step 3: Electrical Connection
Connect the mains supply wires. The diagram indicates connections for Neutral (N: Blue) and Live (L: Brown) using wires of 2x0.75mm² cross-section.
-
Step 4: Luminaire Attachment
Position the Ledinaire Panel over the mounted brackets and secure it. The diagram shows the panel being attached to the brackets.
-
Step 5: Final Securing
Ensure all connections are properly made and the luminaire is firmly attached to the mounting structure.
-
Step 6: Power Up
Once installation is complete and verified, the luminaire can be connected to the power supply.
Important Warnings and Safety Information
- ⚠️ The luminaire shall not be covered with thermal insulation or similar material under any circumstance.
- ⚠️ If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- ⚠️ The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- ⚠️ Luminaire must not be used or stored in corrosive environments where hazardous materials such as sulphur, chlorine, phthalates, etc., are present.
Electrical Characteristics
Inrush Current
The luminaire exhibits an inrush current characteristic. The graph illustrates the relationship between mains current (I mains) and time.
| Electrical Characteristic | Value |
|---|---|
| Power | 34W |
| I max (A) | 17.8 |
| Tref (µs) | 287 |
| MCB Compatibility (Luminaires Max.) | |
| B-10 A | 11 |
| B-13 A | 15 |
| B-16 A | 20 |
| C-10 A | 21 |
| C-13 A | 28 |
| C-16 A | 35 |
System Ready (SR) Compatibility
For SR-based luminaires, only SR-Certified components/sensors are to be used. The functional compatibility of components/sensors used in combination, as well as override possibilities, must be released by the master component/sensor supplier. A full system verification is required if using a NEMA 7-pin socket on an SR-based luminaire. Failure to comply with these instructions may lead to risks of damage and non-compliance, for which Signify cannot be held responsible.
Further information can be found at: http://www.lighting.philips.co.uk/oem-emea/products/driving-connected-lighting
Warranty and Disposal Information
Warranty Terms
Storage, installation, use, operation, and maintenance of the products must be performed exactly according to the instructions in this manual and/or other instructions provided to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
WEEE Disposal Statement
Please inform yourself about the local waste disposal, separation, and collection system for electrical and electronic products and packaging. Please act according to your local rules and do not dispose of your old product and packaging with your normal household waste. The correct disposal of the packaging, your product, and/or batteries will help prevent potential negative consequences for the environment and human health. Batteries should be disposed of separately from the municipal waste stream via designated collection facilities. When disposing of a product that contains non-user replaceable batteries, the non-user replaceable batteries shall be removed by a professional.
