SpeaKa Professional Monitor Arm Safety and Technical Instructions
Order No.: 3089720 (SP-MM-1000)
Order No.: 3089721 (SP-MM-990)
Order No.: 3088863 (SP-MM-980)
Order No.: 3088864 (SP-MM-970)
1 Download Instructions
Access the link www.conrad.com/downloads (or scan the QR code) to download the complete user instructions (or new/current versions, if available). Follow the instructions on the web page.
2 Intended Use
Depending on the model, the product may consist of a monitor arm or a laptop arm. This product is intended for indoor use only. Do not use in outdoor environments. Contact with moisture must be avoided under all circumstances. If the product is used for purposes other than those intended, it may be damaged. Improper use can cause hazards. This product complies with the relevant national and European requirements. For safety reasons and in accordance with regulations, alteration and/or modification of the product are not permitted. Read the instructions carefully and keep them in a safe place. If the product is transferred to a third party, include these user instructions. All company names and product designations contained herein are trademarks of their respective owners. All rights reserved.
3 Description of Symbols
- ⚠ [Warning] The symbol warns of hazards that could lead to personal injury.
- ⚡ [Electric Hazard] The symbol warns of dangerous voltages that can cause personal injury due to electric shock.
4 Safety Instructions
Read the user instructions carefully and pay particular attention to the safety information. In case of non-compliance with the safety instructions and information on the correct use of the product, no liability is accepted for any damage to persons or property. In such cases, the warranty becomes void.
4.1 General Information
- The product is not a toy. Keep out of reach of children and pets.
- Do not leave packaging material unattended. It could become a dangerous toy for children.
- Do not hesitate to contact customer service or other competent technical personnel if you have questions not answered in the product's instruction manual.
- Have maintenance, adaptation, and repair work carried out exclusively by an expert or a specialized workshop.
4.2 Handling
- Handle the product with care. Jolts, impacts, or drops, even from low heights, can damage the product.
4.3 Operating Conditions
- Do not subject the product to mechanical stress.
- Protect the equipment from extreme temperatures, strong impacts, gases, vapors, and flammable solvents.
- Protect the product from humidity and wet conditions.
- Protect the product from direct sunlight.
4.4 Operation
- Consult an expert if you have doubts about the operation, safety, or connection of the product.
- If the product can no longer be used safely, take it out of service and protect it from any accidental use. DO NOT attempt to repair the product yourself. Correct operation is no longer guaranteed if the product:
- is visibly damaged,
- no longer functions correctly,
- has been stored for long periods in adverse environmental conditions,
- has been subjected to severe transport-related stress.
4.5 Connected Devices
- Also observe the safety and operating instructions of any other device connected to the product.
4.6 Before Assembly and Installation
- Check that the scope of delivery is complete before assembling the monitor mount and accessories. Do not assemble if parts are missing.
- Avoid damaging the monitor. To know how and where to attach the mount or fixing for the monitor, consult the manufacturer's instructions provided with the monitor.
- Handle the monitor and screen with care. Always place the monitor flat and use a cushion or cloth to protect the table surface and the monitor from damage.
- Danger of injury and/or damage during unpacking of the gas spring arm! Hold the gas spring arms firmly while a second person cuts the retaining strap. Slowly release the tension on the gas spring arms and slowly open to maximum length.
4.7 Table Installation
If you wish to install the monitor mount on a table, proceed as follows:
- Secure the monitor mount to a table whose surface is sufficiently stable and horizontal. Tables made of glass, ceramic, or stone slabs, or thin plasticized wood fiber boards are not suitable for this type of installation. Furthermore, it is not permitted to attach the monitor mount to shelves or similar surfaces that are unstable or wobbly.
- Secure the monitor mount in a position on the table surface suitable for this type of installation. Take into account the high leverage effect generated!
- Due to the weight of the monitor and mount, the mounting position, and the high leverage effect, the table surface can be scratched. For this reason, it is not recommended to install the mount on valuable furniture.
- For safety reasons, the mount and the monitor placed on it must be positioned only above the table surface. The design of many monitor mounts does not allow the monitor arm to be placed anywhere other than on the table surface. Furthermore, in some circumstances, there is a risk of tipping over!
- Ensure that the monitor mount is securely fastened to the table surface. Otherwise, it could slip off the table surface when moving the monitor and mount. In addition to causing material damage, this poses a risk of physical injury!
4.8 Wall Mounting
- When drilling the surface or inserting fastening elements, ensure that no cables or pipes are damaged. Accidental drilling into electrical cables poses a risk of fatal electric shock!
- The wall on which the monitor mount is installed must be able to support the combined weight of the mount, accessories, and monitor. Use fastening materials (e.g., screws, wall plugs) suitable for the wall. If in doubt, contact a technician before installation.
- The wall on which accessories are mounted must be able to support the combined weight of the accessories and their loads. Use fastening materials (e.g., screws, wall plugs) suitable for the wall. If in doubt, contact a technician before installation.
4.9 Monitor Removal
- Danger of injury and/or damage due to the gas spring arm! Before removing a mounted monitor, always bring the front arm to the highest position, so that it cannot "spring up" after the monitor is removed.
5 Maintenance
Over time, adjusting the monitor mount positions may cause screws to loosen. Periodically check all screw fastenings.
6 Technical Data
6.1 Base
| Order No.: | 3089720 | 3089721 | 3088863 | 3088864 |
| Model No.: | SP-MM-1000 | SP-MM-990 | SP-MM-980 | SP-MM-970 |
| With eyelet* | 12 - 50 mm | Not applicable | 12 - 50 mm | 12 - 50 mm |
| With C-clamp* | 12 - 45 mm | Not applicable | 12 - 50 mm | 12 - 50 mm |
*These values indicate the min/max table thickness with which the eyelet and C-clamp can be compatible.
6.2 Monitor Arm
| Order No.: | 3089720 | 3089721 | 3088863 | 3088864 |
| Model No.: | SP-MM-1000 | SP-MM-990 | SP-MM-980 | SP-MM-970 |
| Capacity (per arm) | Monitor: 2 - 20 kg Notebook: 1 - 9 kg | Monitor: 2 - 20 kg | Monitor: 2 - 20 kg | Monitor: 2 - 20 kg |
| Screen Size | Monitor: 43.2 - 124.46 cm (17" - 49") Notebook: 28.9 - 44cm (11.37-17.3") | Monitor: 43.2 - 124.46 cm (17" - 49") | Monitor: 43.2 - 124.46 cm (17" - 49") | Monitor: 43.2 - 124.46 cm (17" - 49") |
| VESA Compatible | 75 x 75, 100 x 100 | 75 x 75, 100 x 100 | 75 x 75, 100 x 100 | 75 x 75, 100 x 100 |
6.3 General
| Order No.: | 3089720 | 3089721 | 3088863 | 3088864 |
| Model No.: | SP-MM-1000 | SP-MM-990 | SP-MM-980 | SP-MM-970 |
| Dimensions | 130 x 573 x 767 mm | 116 x 547 x 480 mm | 972 x 113 x 751 mm | 132 x 558 x 575 mm |
| Weight* | 7.55 kg | 3.12 kg | 6.6 kg | 3.59 kg |
