NEXTECH Wireless Driveway & Entry PIR Alert Kit
LA5178
User Manual
FUNCTION
The alarm system adopts a professional wireless transmitting and receiving module with learning code, which enables easy and convenient operation. The Outdoor Unit is a passive infrared sensor. When the Outdoor Unit detects thermal infrared signals (e.g., a moving person), it will send wireless signals to the Indoor Unit. The indoor unit will emit a “ding-dong, ding-dong” sound and the LEDs will flash twice to warn you.
OPERATING GUIDE
-
Indoor Unit Switches: There are two switches on the indoor unit.
- ON/OFF: As the name suggests, this switch turns the Indoor Unit ON or OFF.
- HI/LO: Change the volume of the chime between high (HI) volume and low (LO) volume.
-
Code Learning: Insert batteries into the Indoor Unit; the unit will emit a ding-dong sound and flash once to indicate the batteries have been installed. Next, press the Coding button at the back of the indoor unit and then insert batteries into the Outdoor Unit. The Outdoor Unit will give off a red light and send out wireless signals. After the Indoor Unit receives the signals, it will emit a ding-dong sound and flashing light, which indicates the code learning is successful.
-
Code Clearing: Press and hold the coding button and then power on. After 11 seconds, release the button after hearing one “DI” tone. Then after 4 seconds, you will hear "Di Di Di DingDong" tone, which indicates successful code clearing.
-
Low Voltage Indication Instructions:
- Indoor Unit: When the voltage is less than 3.3V, the LED light will be on constantly.
- Outdoor Unit: When the voltage is less than 3.3V, the LED light will be on constantly.
Note: When the low voltage indication is on, please replace the batteries as soon as possible to avoid any effect to your operation. The indicator light will turn off when the power runs out.
SPECIFICATIONS
| Wireless Frequency: | 433MHz Digital |
| Wireless Range: | Up to 50m |
| Alarm: | 80-100dB |
| PIR Angle: | 90° |
| PIR Range: | Up to 6m |
| Batteries: | 3 x AA (Transmitter) 3 x AA (Receiver) |
| IP Rating: | IP44 (Transmitter) |
| Dimensions: | 122(H) x 62(W) x 40(D)mm (Transmitter) 130(H) x 70(W) x 26(D)mm (Receiver) |
Distributed By
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere NSW 2116 Australia
Ph: 1300 738 555
Int'l: +61 2 8832 3200
Fax: 1300 738 500
Website: www.techbrands.com
Made in China
