Smeg PBF01 Personal Blender

Introduction

Thank you for purchasing a Smeg appliance. Smeg products combine iconic style with innovative technical solutions, designed to complement your kitchen and lifestyle. We hope you enjoy using your new personal blender.

Safety Instructions

⚠️ Important Safety Precautions

General Safety

• Read this instruction manual carefully before use.
• Do not leave the appliance unattended while in operation.
• Do not use the appliance if the power cord or plug is damaged, or if the appliance has been dropped or damaged in any way.
• If the power cord is damaged, contact technical support for replacement.
• The appliance cord is intentionally short to prevent accidents. Do not use extension cords.
• Avoid contact between the power cord and sharp edges.
• Do not pull the cable to remove the plug from the socket.
• Do not place the appliance on or near gas or electric hobs, inside ovens, or near heat sources.
• Do not attempt to repair the appliance yourself. Contact qualified service personnel for repairs.
• Do not make modifications to the appliance.
• In case of fire, do not extinguish with water. Turn off the appliance, unplug it, and cover the flame with a fire-resistant lid or blanket.
• Keep hands, hair, clothing, and kitchen utensils away from moving parts during operation to prevent injury.

Specific Precautions for this Blender

• Handle the container with care, especially when emptying or cleaning it.
• Ensure the container and blade unit are correctly secured.
• Do not overfill the container (maximum capacity: 600 ml).
• The blades are very sharp; do not touch them with your hands.
• Exercise extreme caution when assembling, disassembling, and cleaning the blade unit.
• Never operate the blender without the container attached.
• Unplug the appliance before changing accessories or touching parts that move during operation.
• Always disconnect the appliance from the power supply if it is not in use, if it breaks down, or if it is left unattended.
• Before mounting or dismounting components, always disconnect the appliance from the power supply.
• Before cleaning, unplug the appliance and let it cool down.
• Before starting the blender, ensure the container is securely attached to the blade unit.
• Do not use parts or accessories from other manufacturers. Use only original spare parts from the manufacturer. Using non-recommended parts may cause fire, electric shock, or injury.
• Place the blender only on a flat, dry surface.
• Do not operate the blender with an empty container.
• Do not stack items on the blender. Store the container empty.
• Do not add hot liquids to the container; wait for them to cool to room temperature.
• Do not use abrasive cleaning agents or sharp objects for cleaning or removing residue from the container.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed by a responsible person.
• Children should not use this appliance. Keep the appliance and its cord out of reach of children.
• Supervise children to ensure they do not play with the appliance.
• Refer to section "4 Cleaning and Care" for proper cleaning instructions.

Connecting the Appliance

• Check that the mains voltage and frequency match the specifications on the rating plate at the bottom of the appliance.
• If the appliance plug does not fit the socket, contact technical support for replacement.

Manufacturer's Responsibility

The manufacturer is not liable for damage to persons or property caused by:

• Improper use of the appliance.
• Failure to read the instruction manual.
• Tampering with any part of the appliance.
• Use of non-original spare parts.
• Non-compliance with safety regulations.

Keep instructions safe. Pass them on to future owners along with the appliance. These instructions can be downloaded from the Smeg website: www.smeg.com.

Disposal

This appliance is subject to European Directive 2012/19/EU concerning waste electrical and electronic equipment (WEEE). Do not dispose of this appliance with household waste. Take it to a designated collection center for WEEE. Consult local authorities for information on collection points. Dispose of packaging materials in accordance with local regulations.

Product Description

Diagram A shows the main blender unit with numbered components:

• 1. Container: 600 ml capacity with protective lid and cap. Made from BPA-free Tritan™ Renew.
• 2. Blade unit: Made of stainless steel, suitable for making smoothies, milkshakes, and fruit cocktails.
• 3. Control dial: For selecting speed.
• 4. Motor base: Houses the motor.
• 5. Power cord opening.
• 6. Rating plate: Contains technical data, serial number, and markings. Do not remove.

⚠️ Sharp Blades: Risk of cuts. Do not touch the blades with your hands.

ℹ️ Materials that come into contact with food products comply with current legislation.

How to Use

Before First Use

• Remove any labels and stickers from the blender. Clean the motor base with a damp cloth.
• Remove the container from the blender.
• Wash and dry all components (see section "4 Cleaning and Care").

⚠️ Safety: Risk of unintentional start-up. Ensure the blender plug is removed from the socket before installing the container.

Using the Blender

Follow these steps for assembly and operation (Refer to Diagrams B1, C1, D1):

1. Add ingredients to the container (1), ensuring not to exceed the maximum capacity (600 ml).

2. Do not add hot liquids to the container; wait for them to cool to room temperature.

3. For best results:
   • First, add solid ingredients, then soft ingredients, and finally liquid ingredients.
   • Ensure the maximum size of solid ingredients is 1 cm x 1 cm.
   • The liquid volume should be at least 50% of the solid volume.
   • You can add a maximum of 4 ice cubes (approx. 15g each) to liquid ingredients. NEVER add ice to a dry mixture.
4. Secure the blade unit (2) onto the container by rotating it clockwise. Check that it is firmly attached (Refer to Diagram B1).
5. Place the blender on a stable, horizontal surface. Plug the appliance into the socket.
6. Attach the container (1) to the motor base (4) by twisting it onto the base (Refer to Diagram C1).
7. Select the desired speed (1 or 2) using the control dial (3), depending on the desired result (Refer to Diagram C1).
8. To start the blender, press the container (1) down lightly. The LED ring will light up continuously while you press the container.
9. To stop the blender, release the container (1). The appliance and the LED will switch off.

⚠️ The blender will not operate if the container is not correctly positioned.

⚠️ Never shake the container during operation.

Note: The blender can operate for a maximum of 60 seconds at a time. Allow a 60-second pause before the next operation.

⚠️ If the motor blocks, immediately unplug the blender, disconnect it from the power supply, and let it cool for at least 10 minutes.

After Use

• After blending and the blades have stopped moving, set the control dial (3) to "0".
• Remove the container (1) from the motor base (4) and turn it upside down. To detach the blade unit (2), twist it counter-clockwise (Refer to Diagram D1).
• Screw the lid onto the container and attach the protective cap (Refer to Diagram D1).

The blender is equipped with a safety lock that switches off the appliance if the container is removed. It also has a motor protection device that activates in case of overheating.

General Recommendations and Tips

• Remove hard parts from ingredients (e.g., cores, pits, bones).
• Do not leave food residue in the container or on the blade unit for extended periods, as it will be difficult to remove once dried. It is recommended to clean components immediately after use (see section "4 Cleaning and Care").
• Some products, like carrots, may stain the container. It is recommended to clean components immediately after use.

Cleaning and Care

⚠️ Improper Use. Risk of surface damage.

• Do not use steam jets for cleaning the appliance.
• For components with metal plating (e.g., anodized, nickel-plated, chrome-plated), do not use cleaning agents containing chlorine, ammonia, or bleach.
• Do not use abrasive or corrosive cleaning agents (e.g., powders, stain removers, metal scouring pads).
• Do not use rough or abrasive materials, or sharp metal scrapers.

Cleaning the Motor Base

To keep the appliance surfaces in good condition, clean them regularly after each use, allowing them to cool down. Clean with a soft cloth slightly dampened with a neutral detergent.

Cleaning Components

For faster cleaning, it is recommended to clean components immediately after using the appliance.

• Except for the blade unit (2), all other components are dishwasher safe.
• Alternatively, all components can be washed by hand with warm water and a neutral detergent.
• Dry components thoroughly before reassembling them.

Troubleshooting

If the appliance does not start:

• Cause: Motor overheated. Solution: Unplug the appliance and let the motor cool down.
• Cause: Plug not inserted correctly into the socket. Solution: Insert the plug into the socket. Do not use adapters or extenders. Ensure the main switch is on.
• Cause: Power cord is damaged. Solution: Contact an authorized service center for cable replacement.
• Cause: Electricity is off. Solution: Ensure the main switch is on.
• Cause: Container not fully screwed in. Solution: Check the container's position.
• Cause: Motor at zero position. Solution: Select one of the two speeds.

If the blender vibrates:

• Cause: Blender is not placed on a stable surface. Solution: Place the blender on a flat, stable surface.
• Cause: Anti-slip feet are worn. Solution: Contact an authorized service center for their replacement.
• Cause: Too high speed or excessive load. Solution: Select a lower speed and check if the container is overloaded.

If the blender stops during operation and the white LED blinks:

• Cause: Blades may be jammed. Solution: Unplug the appliance from the socket and clean the blades using a spatula.

If you cannot resolve the problem or if other malfunctions occur, contact technical support in your region.