Smart Watch User Manual - Model 582728

I. Instruction for Use

Warm Reminder: This product requires downloading the companion app ('fitcloudpro') and connecting via Bluetooth through the app. It cannot connect to Bluetooth independently. Please note this requirement.

• Smartwatches can measure heart rate and blood oxygen levels, but these functions are not intended for medical use.
• Charging: Ensure the smartwatch is fully charged before first use. Align the magnetic charging cable's pins with the smartwatch's charging contacts, or connect to a 5V 1A USB adapter. Keep metal contacts clean and free of dust or oxidation. A charging icon will appear on the screen during charging. If the smartwatch is stored for extended periods, charge it at least once a month.
• Do not use a power adapter with an output current exceeding 2A, as this may damage the device.
• Avoid showering with hot water or exposing the smartwatch to high temperatures, as this can compromise its water resistance.
• Do not attempt to charge the device when it is wet or in contact with water.

II. Appearance

Product Components:

• Case: The main body of the smartwatch.
• Function Keys: Buttons for interacting with the device.
• Touch Screen: The primary interface for user interaction.
• Strap: The band that secures the watch to the wrist.
• Switch: Refers to buttons or toggles on the device.
• Light Sensor: Used for ambient light detection or other sensor functions.
• Charge Magnet: Part of the magnetic charging mechanism.
• Charging Cable: The cable used to charge the device.
• Back/Turn Off: A function key for returning to the previous screen or powering off.
• Charging Contacts: Metal points on the watch for magnetic charging.

Note on Strap Removal and Charging: The manual indicates a section for 'Remove Strap and Charge Mode', suggesting these actions are related or shown visually in the original document, but no specific instructions are detailed here beyond the general charging advice.

II. Package List

• Package Box * 1
• Smart Watch * 1
• User Manual * 1
• Magnetic USB Charger Cable * 1

III. Application Installation and Bluetooth Connection

To use the smartwatch's full functionality, download the "fitcloudpro" app from Google Play (Android) or the App Store (iPhone). Alternatively, scan the provided QR code (not present in OCR) to download the app.

Compatibility Requirements:

• Android: Version 5.0 and above.
• iOS: Version 10.0 and above.
• Bluetooth Hardware: Version 5.0 and above.

Pairing the Smartwatch:

1. Open the "fitcloudpro" app.
2. Navigate to the "bind device" or similar section.
3. Search for and select your smartwatch from the list of available devices. If multiple devices are nearby, choose the one matching your smartwatch's MAC address.
4. Once successfully paired, a Bluetooth icon will appear on the smartwatch's screen, indicating a stable connection.

Bluetooth 3.0 Connection (for Calls):

After connecting the watch to the "fitcloudpro" app, your phone may prompt a Bluetooth pairing request for audio. Connect to "NX9 HT audio Bluetooth" by accepting the pairing. This enables call functionality. Once connected, you can make and receive calls directly from the watch, and view call logs. Ensure the Bluetooth connection remains stable. If disconnected, refresh the connection by pulling down the main interface and clicking the headset icon until it turns blue.

IV. Product Parameters

V. Instructions for Use (Navigation)

Interact with the smartwatch using the side button and touch screen:

• Wake Screen: Press the side button or lift your wrist.
• Switch Interface (Home Page): Press and hold the side button for 3 seconds.
• Information Bar: Slide up from the home screen.
• Control Center: Slide down from the home screen.
• Sports Data: Slide left from the home screen.
• Function List: Slide right from the home screen.

VI. Function Description

1. Replace Watch Dial

Long press the main page for 3 seconds to access the dial replacement screen. You can also download replacement dials via the "fitcloudpro" app.

2. Control Center

Accessed by sliding down from the home screen. It provides quick access to:

• Do Not Disturb Mode
• Brightness Adjustment
• Settings
• Find My Phone
• System Information
• Shutdown

3. Brightness Adjustment

In the Control Center, tap the brightness adjustment icon to modify screen brightness.

4. Do Not Disturb Mode

In the Control Center, tap the "Do Not Disturb" icon to enable silent mode.

5. Find My Phone

In the Control Center, tap the "Find My Phone" icon. Your paired phone will vibrate to alert you.

6. System

In the Control Center, tap "System" to view device information, such as the system version.

7. Settings

In the Control Center, tap the "Settings" icon to access various function settings.

8. Information / Audio Mode

Slide up to the Control Center (or potentially a separate gesture), click the audio icon to open audio mode.

9. Sport Data

Slide left once to view sports data, including steps, calories burned, and distance covered.

10. Heart Rate

Slide left twice to access the heart rate measurement screen. Tap to start measurement and view results.

11. Call Function

Requires connection to audio Bluetooth. You can dial numbers directly from the watch. Long press keys '7' and '9' to input '*' and '#' respectively.

12. Sport Mode

Slide right to the function list, then tap "Sport Mode" to select your preferred activity.

13. Weather

Slide right to the function list, tap the weather icon to view current weather conditions.

14. Music Control

Slide right to the function list, tap "Music Control" to manage playback, including skipping tracks.

15. Body Temperature

Measure body temperature directly from the watch.

VII. Other Functions

• Alarm Clock
• Find Watch Reminder
• Call Reminder
• Drink Water Reminder
• Sedentary Reminder
• Low Power Reminder
• Remote Camera (activated via the app)
• Find Phone
• Timer

VIII. Cautions and Battery Information

Important Cautions:

• Heart Rate Measurement Accuracy: For accurate heart rate readings, wear the smartwatch snugly against your wrist. This ensures the light sensor can properly collect reflected signals without interference from ambient light.
• Hot Baths: It is not recommended to wear the smartwatch in hot baths. High temperatures create steam, which can penetrate the watch casing. As temperatures cool, condensation can form, potentially damaging the internal circuitry.
• Bluetooth Connection: Ensure Bluetooth is enabled on both your phone and the smartwatch. Keep the devices close during the initial Bluetooth search and pairing process. Avoid connecting to other accounts simultaneously.
• App Background Operation: If your phone has management software (e.g., Mobile Manager), ensure the "fitcloudpro" app is allowed to run in the background and receive notifications to guarantee its normal operation and message push functionality.
• Blood Oxygen Data Accuracy: To ensure accurate blood oxygen readings, remain relaxed and still during the test. The smartwatch should be positioned at the same height as your heart. Avoid talking during the measurement. This feature provides reference data for pre- and post-exercise blood oxygen changes and is not a substitute for medical diagnosis.

Battery Information:

Warning:

This product is not a medical device. The smartwatch and its applications are not intended for diagnosing, treating, or preventing any diseases. Consult a medical professional before making significant changes to your exercise or sleep habits to avoid potential injury. The manufacturer reserves the right to modify product descriptions and update content without prior notice. This user guide is for reference only; refer to the final product for specific details.