Smart Watch Quick Tour
Please read the manual carefully before use and keep it properly for future use.
Packing List
- Host machine for the watch x1
- Rubber watchband x1
- Charger x1
- Quick tour x1
Product Overview
The watch has the following components:
Front View:
- ①. Power switch
- ②. TFT display
- ③. Watchband card
- ④. Wristband
Back View:
- ⑤. Sensor
- ⑥. Charging port
Note: To make the measurement more accurate, please wear the watch on your wrist away from the carpus. Please attach it to your skin but not too tightly.
Touch Control and Buttons
Gestures:
- Slide downward: Call the control center.
- Slide upward: Call the notification center.
- Slide right: Call the function menu.
- Slide left: Call the quick function.
- Long press: Call the display switch.
Power Switch:
- Power on: Long press for 3 seconds until the display is on.
- Power off: Long press for 3 seconds and select [power off].
- Screen on/off: Short press.
Note: If you fail to start the watch after long pressing the power switch for 3 seconds, please charge the watch and try again.
Connect the Mobile Phone
To connect your watch to your mobile phone, you need to download and install the 'FitCloudPro' app.
App Download:
- For iOS devices: Search for 'FitCloudPro' in the App Store.
- For Android devices: Search for 'FitCloudPro' in your device's application store (e.g., My app) or scan the QR code provided in the original document.
Pairing and Connection Steps:
- On your mobile phone, navigate to [Settings > System > System Information] to view the Bluetooth name.
- Open the 'FitCloudPro' app on your mobile phone and log in or register an account.
- In the app, click on [Device > Add a device > Start to search].
- Select the watch's Bluetooth name from the search results to complete pairing.
Important Notes for Pairing:
- Ensure the watch's battery level is over 20% before pairing.
- During the pairing process, ensure your mobile phone's Bluetooth is enabled and the watch is within effective connection distance.
- This device requires Android 5.1 and above, or iOS 9.0 and above.
Charging
Instructions: Attach the magnetic charging wire to the metal contacts of the watch's charging port. The charging indication will appear on the watch display.
Important Precautions:
- The device is an all-in-one machine; the back cover and battery cannot be disassembled.
- Do not open or bash the back cover.
- Do not disassemble, replace, or open the battery.
- Dispose of the device and battery in accordance with local environmental protection laws.
Adapter Requirements: Use an adapter with a rated output voltage of 5V=1A or 5V=2A.
Maintenance: Please keep the charging port clean and dry before charging to prevent corrosion or other risks to the metal contact.
Function Introduction
1. Dial Switch
Long press the home screen for 2 seconds to enter the dial switch interface. Slide right and left to switch between dials for selection, and click to select your preferred dial. The first dial in the APP dial library can be customized.
2. Control Panel
Access the control panel by sliding downward on the home screen. Functions include: Do Not Disturb, Settings, Search for Mobile Phone, System Information, and Brightness Adjustment.
3. Movement Data
This feature displays your step number, distance covered, and calories burned for the day. You can set daily goals within the companion App.
4. Sport Modes
Select from various sport patterns including: walking, running, mountain climbing, cycling, badminton, basketball, and round-belly machine. Click the corresponding icon to start exercising.
5. Heart Rate
Enable regular heart rate detection via the companion App. The interface displays your current heart rate. Enter this interface to automatically measure your single heart rate. Swipe up to view historical heart rate data for the day.
6. Sleep Monitoring
The interface displays the results of your sleep monitoring for the day, including deep and light sleep stages. Data is updated daily. Connect to the App to upload and save your sleep data synchronously.
7. Blood Pressure
Enter the blood pressure measurement interface. When the green light at the bottom is on, measurement begins. The measurement is based on PPG technology and will be completed within 30-60 seconds.
8. Blood Oxygen
Enter the blood oxygen measurement interface. When the green light at the bottom is on, measurement begins. The measurement is based on PPG technology and will be completed within 30-60 seconds.
9. Music Control
Use Bluetooth connection to control music playback on your phone.
10. Weather
After connecting your watch to the App and granting location permission, the weather interface will display the real-time temperature and weather type.
11. Stopwatch
This interface provides stopwatch functionality, including the ability to set split times.
12. Information/Notifications
Enable information push on the App, and the watch can receive corresponding messages. It can store up to 15 messages; exceeding this limit will automatically overwrite the oldest message. You can slide on the home screen to access this function.
13. Find My Phone
Keep the watch connected to the App and click "Find My Phone". Your mobile phone will ring, and the watch will indicate if your phone has been successfully found. If the watch is not connected to the App, it will display a "not connected" status.
14. Settings
Setting functions include: Screen display (dial switch, brightness control, screen brightening duration, screen brightening through palming), vibration strength, language, QR code, and system settings.
15. Notification Functions
Drinking Reminder:
Open this function via [Device > Drinking reminder] in the App. You can set the start time, end time, and reminder interval.
Sedentary Lifestyle Reminder:
Open this function via [Device > Sedentary lifestyle reminder] in the App. You can set the start time, end time, and the period for Do Not Disturb.
Alarm Clock Reminder:
You can set and open the alarm clock reminder.
Notes
- Please do not disassemble, repair, or retrofit the product without authorization.
- Please do not crash the product with force, or else the product may be damaged.
- Please keep it away from high-intensity magnetic fields, direct sunlight, or high temperatures.
- The product shall not be used for diagnosis, treatment, or prevention of diseases.
- The waterproofing grade of the product is IP68. Please do not immerse it in water for extended periods.
- Please do not keep the watchband too tight. Keep clean the area where the watch contacts your skin.
- In order to prevent damage, children should use the product under the guidance of parents.
Performance Parameters
- Product name: Electronic watch
- Model: H10
- Display screen: 1.28TF color screen, 240x240 pixel resolution
- Waterproofing grade: IP68
- Sensor: Triaxial G-sensor
- Maximum endurance: 5-7 days
- Operating temperature: -10℃ to 50℃
- Battery type: Polymer lithium battery
- Battery capacity: 200mAh
- Compatible system: Android 5.1 and above, iOS 9.0 and above
Frequently Asked Questions and Troubleshooting
Fail to start the watch
Press the power switch for more than 3 seconds. The battery level might be too low; please charge the battery timely.
The Bluetooth is not connected or cannot be connected
Please restart the watch and connect again. Please restart your mobile phone's Bluetooth and connect again. Do not connect your mobile phone to other Bluetooth devices at the same time.
The measurement of heart rate/blood oxygen/ECG is inaccurate
Generally, this is caused by poor contact between the watch sensor and the human body. Please ensure that the sensor contacts the wrist well during measurement. Keep your body still and the watch attached tightly to your wrist during measurement. For individuals with dark skin color or thick arm hair, please enable intensified measurement through [Device > Intensified measurement] in the App.
Sleep data is not accurate enough
Sleep monitoring simulates the status of natural sleep. You should wear the watch as usual. If you sleep too late or do not wear the watch until you go to sleep, there may be some error. Daytime sleep is not monitored. The default time for sleep monitoring is from 9:30 PM to 12:00 PM the next day.
For more frequently asked questions, please view [My > FAQ] on the App.
Why does the bracelet not receive notifications?
5.1 Android phone:
When the user turns on the notifications switch for the first time, the App will ask for the corresponding permissions. Activate all necessary permissions.
9.0 iOS phone:
When the user turns on the call or message notifications switch, the system will automatically pop up a pairing request. The user needs to confirm the pairing.
