nVent LENTON Sealing Disk, 28 mm, #9, 30M

Product Information

Material Number: LK609

Sealing disks are typically used in vertical pump fill applications, such as columns and shear walls. The sealing disk prevents bedding mortar from entering into the sleeve during installation and grout filling.

Function

Rubber seal is designed to fit tightly around the reinforcing bar.

[Easy to install] ✔️

Product Attributes

Article Number: 145650

Material: Steel; Neoprene

Rebar Size, Metric: 28 mm

Rebar Size, US: #9

Rebar Size, Canada: 30M

Diameter 1 (Ø1): 95 mm

Diameter 2 (Ø2): 25.4 mm

Thickness (T): 2 mm

Unit Weight: 0.04 kg

Additional Product Details

Prior to installation, please read and understand the detailed instructions and safety notices provided in the nVent LENTON Interlok Instruction Manual.

Diagram: The diagram shows a cross-section of the sealing disk with two diameters labeled Ø1 and Ø2, and a thickness labeled T.

Warning

Only install and use nVent products according to nVent product instructions and training materials. Instructions can be found at www.nvent.com. Failure to follow nVent instructions, improper use, misuse, or failure to comply with nVent instructions may result in product malfunction, property damage, severe personal injury, and death, and/or void the warranty.

Contact Information

North America: +1.800.753.9221

Europe (Netherlands): +31 800-0200135

Europe (Germany): 800 1890272

Europe (France): +33 800 901 793

Other Countries: +31 13 5835404

APAC (Shanghai): +86 21 2412 1618/19

APAC (Sydney): +61 2 9751 8500

Our powerful portfolio of brands:

CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF, TRACHTE

	nVent LENTON Dust Cap 25mm (#8, 25M) - Product Details and Installation Detailed information on the nVent LENTON Dust Cap, 25mm, designed to protect couplers from dirt and water. Includes product specifications, features, and important safety warnings for installation and use.
	nVent LENTON Horizontal Pouring Basin, Top Fill, Extended, 48 mm dia - RBHA9740C Details on the nVent LENTON RBHA9740C Extended Top Fill Horizontal Pouring Basin, made from heat-resistant graphite, designed for T-Series and B-Series sleeves. Includes product specifications, dimensions, and safety information.
	nVent B-Series Vertical Sleeve 57 mm #18 55M Product Information Detailed information on the nVent B-Series Vertical Sleeve, a 57 mm rebar splicing solution for structural steel applications. Includes features, specifications, and contact information.
	nVent SCHROFF 34563-042 EuropacPRO Mounting Plate - 84 HP, 400mm Technical datasheet for the nVent SCHROFF 34563-042 EuropacPRO Mounting Plate. Features 84 HP width and 400mm board length for heavy component installation in subracks and system cases.
	nVent ERIFLEX IBS Advanced Insulated Braided Conductor: Specifications and Compatibility Comprehensive details on the nVent ERIFLEX IBS/IBSB Advanced Insulated Braided Conductor. Features include halogen-free, low smoke, flame retardant properties, high flexibility, and easy installation. Includes product attributes, certifications, and extensive circuit breaker compatibility data.
	T-Series Vertical Splice Kit, 32 mm, #10 - nVent Details on the nVent T-Series Vertical Splice Kit for 32 mm (#10) rebar, including components, features, and ordering information. This kit simplifies rebar splicing and is available with extended sleeve lengths.
	nVent LENTON Measuring Pitcher - Product Specifications and Usage Detailed information about the nVent LENTON Measuring Pitcher, including its features, specifications, and usage guidelines. Learn about its durable design and accurate measurement capabilities for nVent LENTON grout.
	nVent CADWELD Flint Ignitor T320 - Product Overview and Specifications Detailed information on the nVent CADWELD Flint Ignitor, model T320. This product is used to ignite starting material for nVent ERICO Cadweld and nVent LENTON Cadweld rebar connections. Includes features, warnings, and regional contact information.