Horizontal Pouring Basin, Top Fill, Extended, 48 mm dia

Material Number

RBHA9740C

Extended top fill horizontal pouring basins are used when structural interferences are directly above the tap hole in the sleeve.

Features

Made from heat-resistant graphite
Durable, re-usable and long lasting
Designed for use with T-Series and B-Series horizontal top fill sleeves

Product Attributes

Material: Graphite

Diameter (Ø): 48 mm

Length 1 (L1): 248 mm

Length 2 (L2): 70 mm

Width (W): 76 mm

Height 1 (H1): 140mm

Height 2 (H2): 102mm

Unit Weight: 2.95 kg

A diagram shows the dimensions of the pouring basin, illustrating the diameter (Ø), lengths (L1, L2), width (W), and heights (H1, H2).

Additional Product Details

RBHA pouring basins require one RBM2890S pouring basin frame (sold separately).

Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Manuals can be accessed at www.nvent.com.

Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

Warning

nVent products should only be installed and used in accordance with nVent's product instructions and training materials. Instructions can be accessed at www.nvent.com or requested from your nVent customer service representative. Improper installation, misuse, abuse, or failure to fully comply with nVent's instructions and warnings may result in product failure, property damage, serious personal injury and death, and/or voiding of warranty services.

Contact Information

North America	Europe	Europe	APAC
+1.800.753.9221	Netherlands: +31 800-0200135	Germany: 8001890272	Shanghai: +86212412 1618/19
Option 1 - Customer Care	France: +33800901793	Other Countries: +31135835404	Sydney: +61297518500
Option 2 - Technical Support

nVent Brands

Our powerful portfolio of brands: CADDY ERICO HOFFMAN ILSCO SCHROFF TRACHTE

	nVent LENTON Sealing Disk, 28 mm, #9, 30M - Product Information Detailed information on the nVent LENTON Sealing Disk, 28 mm, #9, 30M, including its material, dimensions, and applications in vertical pump fill applications.
	nVent LENTON Crucible Cover 10.32" - Product Information Details on the nVent LENTON Crucible Cover, 10.32", including its features, product attributes, and application. Made from heat-resistant graphite, it protects operators from heat and sparks during reactions.
	nVent LENTON Bottom Support Clamp, Horizontal Side - Product Overview Detailed information on the nVent LENTON Bottom Support Clamp for horizontal side fill applications, including features, specifications, and diagrams.
	nVent B-Series Vertical Sleeve 57 mm #18 55M Product Information Detailed information on the nVent B-Series Vertical Sleeve, a 57 mm rebar splicing solution for structural steel applications. Includes features, specifications, and contact information.
	nVent LENTON Dust Cap 25mm (#8, 25M) - Product Details and Installation Detailed information on the nVent LENTON Dust Cap, 25mm, designed to protect couplers from dirt and water. Includes product specifications, features, and important safety warnings for installation and use.
	T-Series Vertical Splice Kit, 32 mm, #10 - nVent Details on the nVent T-Series Vertical Splice Kit for 32 mm (#10) rebar, including components, features, and ordering information. This kit simplifies rebar splicing and is available with extended sleeve lengths.
	Nvent Lenton Interlok Position Transition Grout-Fill Coupler \| Technical Specifications Detailed technical specifications, features, and compliance standards for the Nvent Lenton Interlok Position Transition Grout-Fill Coupler, designed for splicing different diameter rebar. Includes model numbers LK1110STHD and LK1411STHD.
	nVent CADWELD Flint Ignitor T320 - Product Overview and Specifications Detailed information on the nVent CADWELD Flint Ignitor, model T320. This product is used to ignite starting material for nVent ERICO Cadweld and nVent LENTON Cadweld rebar connections. Includes features, warnings, and regional contact information.