iENYRID iE-M4 Electric Scooter User Manual

Introduction

Why Is It Necessary To Read This Manual Before Operating?

This manual was written to help you understand the proper use and maintenance of the iENYRID line of Electric Scooters. It is important to understand the functions and features of the new iENYRID before operating it, as it will allow you to enjoy it from every ride.

⚠️ Disclaimer & Warning

During the cycling process, comprehensive safety measures should be taken, and risk awareness and good judgment should be maintained at all times to avoid injuries as much as possible.

• The responsibility for iENYRID maintenance is yours! Proper and frequent maintenance will reduce risks of injuries.
• Please wear a helmet, protective gear, and other safety measures when riding.
• Always follow local laws and regulations.
• Do not perform stunts, spins, or jumps; if you insist on doing these dangerous actions, please take full protective measures.

Product & Component Display

Main Scooter Components

01: Instrument

Displays speed, battery level, gear, etc.

02: Front brake lever

Controls the front brake.

03: Vertical pole buckle

Part of the folding mechanism for the vertical pole.

04: Vertical pole

The main upright pole supporting the handlebars.

05: Headlights

Front illumination for visibility.

06: Front fender

Protects from debris kicked up by the front wheel.

07: Front shock absorber

Absorbs impact for a smoother ride.

08: Front brake

The mechanism for the front brake.

09: Brake pads

Friction material for the brakes.

10: Front wheel

The front wheel of the scooter.

11: Folding buckle

Mechanism used to fold the scooter.

12: Side light strip

Illumination on the sides for visibility.

13: Turn signal

Indicates direction changes.

14: Rear wheel

The rear wheel of the scooter.

15: Rear brake

The mechanism for the rear brake.

16: Motor

Provides power to the scooter.

17: Rear shock absorber

Absorbs impact for a smoother ride.

18: Rear brake

Duplicate entry, likely referring to the brake system.

19: Tail lights

Rear illumination for visibility.

20: Seat buckle

Mechanism for securing the seat post.

21: Seat

The saddle for riding.

Handlebar & Display Components

01: Rear Brake Control Bar

Lever for the rear brake.

02: Horn

Audible warning device.

03: Turn Signal Switch

Activates turn signals.

04: Lamp Button

Controls the lights.

05: Key Of Electric Lock

Used to lock/unlock the scooter.

06: Voltmeter

Measures battery voltage.

07: Meter

The main display unit.

08: Front Brake Control Bar

Lever for the front brake.

09: Gear

Indicates the current gear or speed mode.

10: Speed

Displays current speed.

11: Total mileage

Accumulated distance traveled.

12: Battery level

Indicates remaining battery charge.

13: Accelerator

Controls speed (throttle).

14: Power on button

Button to turn the scooter on/off.

15: Gear position

Indicates the selected gear or mode.

Product Parameters

Maximum load and speed may vary depending on the rider's weight, riding style and terrain.

Products & Accessories

Product Installation

1. Remove the scooter from the packaging box.
2. Lift the handlebar.
3. Tighten and fix the handlebars.
4. Ensure that the handlebars are fixed.
5. Press the folding button with your fingers to unfold the vehicle body.
6. A clicking sound when quickly lifting the handle indicates that the vehicle is locked.
7. Correctly place the buckle safety device.
8. Ensure that the folding buckle is securely locked, which is a prerequisite for safe driving.
9. Install the seat tube by pressing the buckle inward with your fingers.
10. Lock the seat pipe buckle.
11. Take out the seat package parts and fix the large buckles on both sides of the seat pole by hand.
12. Insert connecting rod.
13. Put it into the seat bag.
14. Insert the small buckle for fixation.
15. Screw in screws on both sides.
16. Tighten the screws with the wrench.
17. Insert the seat and secure.
18. Assembly completed.

Product Folding

1. Press the buckle safety device outward with your fingers.
2. The rotating buckle safety device is shown in the figure.
3. Squeeze the front and rear brakes with both hands, and step on the folding buckle with your feet.
4. Quickly and forcefully press down.
5. Turn out the handlebar.
6. Put down the handlebar.
7. Folding handlebars.
8. Folding completed.

Power On & Unlock

Insert the key, turn it clockwise to turn on the power, and long press the power button (power button) on the meter panel to turn it on.

After unlocking, please wear a helmet and protective gear before cycling, and ensure that all functions of the scooter are normal before starting your cycling.

After cycling, please press and hold the power button (power button) on the instrument panel to turn off the power, and then turn the key counterclockwise to turn off the power. Warning, please do not turn the key counterclockwise to turn off the power without turning it off. Doing so will reset your total cycling mileage data to zero. Please be aware.

Safe Driving Warning

Certain countries or regions require safety devices or gear. It is your responsibility to know the state laws and follow them. However, we strongly recommend safety gears to be worn before operating the device.

TIRE AIR PRESSURE

The tire is pressurized to the standard value on the tire.

SAFETY GEAR

Helmet: Most common and serious injuries from riding are head injuries. This can be prevented by wearing a helmet. You must wear a helmet when riding the iENYRID Scooter. The helmet must be worn according to its instructions.

MECHANICAL SAFETY

Before using the iENYRID Scooter:

1. Always perform a visual inspection of all screws and nuts to ensure they are tight and in place. If anything is amiss or missing and you are unsure, please contact the seller to confirm safety before use.
2. Check the tires and wheels and ensure they are not showing signs of wear and tear. Always ensure that the brake mechanism is not touching the wheels and allows free spinning.
3. Always perform mechanical checks of brakes and other parts of the scooter that allow visibility, safety, and functionality.

RIDING SAFETY

1. Put one foot on the board and the other on the ground.
2. Press the accelerator lever slightly, and the scooter will accelerate. Put both feet on the board after you can keep balance. Press down the lever to speed the scooter up.
3. Release the accelerator to slow down. Squeeze the brake lever at the left handlebar to stop the scooter.
4. Tilt your body slightly to the side you want to turn, and slowly turn the handlebars.
5. Do not ride in the rain.
6. Please slow down before speed bumps, potholes, and other uneven surfaces. Bend your knees to steady yourself on complex roads.
7. Do not accelerate downhill.
8. Do not hang heavy objects such as backpacks on the handlebars.
9. Do not press the accelerator when you walk on foot.
10. Do not ride on the roadways.
11. Do not turn suddenly at high speed.
12. No riding in water above 2cm.
13. No riding with another person or a child.
14. Do not step on the fender.
15. Do not touch the disc brake after braking frequently, as it will be very hot!
16. Do not release the handlebars while riding!
17. No riding upstairs or downstairs!

Battery & Charging

BATTERY

• Do not charge indoors.
• Do not turn on and operate the scooter while charging.
• Keep the battery away from children, pets, or direct heat.
• Do not expose the battery to high temperature and pressure.
• Please use the charger included with the scooter for charging.
• Please do not throw away batteries indiscriminately to avoid polluting the environment.
• Do not store the scooter over a long period of time with an almost empty battery.
• From time to time, discharge the battery by riding. Have the battery recharge again and make sure to not leave the battery fully empty.

DO NOT CHARGE if the scooter has the following conditions occur:

• The battery leaks.
• The battery is damaged.
• The battery heats up or is deformed.
• The bottom or overall of the deck overheats.

The use, storage, or charging of the battery outside specified limits may result in the annulment of the warranty, battery damage, and an ineffective battery charging.

First Charge

It is important to fully charge the battery before your first use of the scooter.

Your scooter's battery comes with these built-in features:

1. Balanced charging protection: During charging, the battery automatically balances the voltage among the internal cells to protect each cell.
2. Over-charging protection: The battery stops charging automatically when full to protect against damage.
3. Over current protection: The battery automatically stops charging if the voltage is higher than the prescribed voltage to protect the battery.
4. Over discharging protection: The battery automatically stops discharging when its voltage drops below the under-voltage value to protect the battery.
5. Short-circuit protection: The battery automatically stops output in the case of a short-circuit.

How to charge

1. Do not charge indoors.
2. Ensure that the scooter is TURNED OFF. Connect the external power charger to the scooter.
3. Connect the charger to an electrical outlet, then turn on the power of the electrical outlet.
4. Do not charge the batteries in temperatures below 5 °C or above 40 °C. The battery may stop the charging process.
5. The charger lights up RED - The battery is charging. The charger lights up GREEN - The battery is fully charged.
6. After the battery is fully charged, please unplug the charger in time.

Error Code

After Sales

Dear customer,

Thank you for choosing our product! To ensure that you can install and use our product smoothly, we strongly recommend that you visit our official website to view the related video installation tutorials and after-sales parts replacement videos.

On our official website, you can find detailed video tutorials that guide you on how to correctly install and use our product. In addition, we also provide after-sales parts replacement videos to ensure that you can correctly perform the replacement when needed.

We hope these videos will help you better understand and use our product. If you still have questions or concerns after watching the videos, please feel free to contact our customer service team, and we will be happy to assist you.

Thank you again for your purchase and support!

Wishing you a pleasant user experience!

Official Website: https://www.ienyrid.com

Facebook: f https://www.facebook.com/iENYRID

YouTube: ▶️ https://www.youtube.com/@iENYRID

Online Installation Video:

Limited Warranty

BY USING THIS PRODUCT YOU AGREE TO THIS LIMITED WARRANTY. PLEASE READ THIS LIMITED WARRANTY CAREFULLY.

To benefit from the limited warranty, the customer is advised to read iENYRID Warranty terms together with the "care and maintenance" sections provided in the user manual. This limited warranty applies to the extent permitted by law and unless restricted or prohibited by law.

Attentions for warranty Faults caused by any of following causes are not within the scope of warranty:

1. Failed to maintain according to this user manual.
2. Product damage or defects caused by improper driver operation.
3. Damage caused by misuse, traffic accident, or accidental collision.
4. Damage caused by riding on abnormal roads or accidental collision.
5. Damage of the vehicle caused by natural disaster or irresistible force.
6. Products which have had their serial numbers removed or tampered with.
7. Defects or malfunctions of the product not notified by customer during the Warranty Period.
8. Products used for commercial purposes including but not limited to leasing/hiring, use in competitions etc.
9. Performing high-risk actions such as stunts, spinning, or jumping lead to rapid aging or malfunction of the product.
10. Expose this product under blazing sun or outdoor for a long time, as that will speed up the aging process of the product and cause malfunction.
11. Defects or damages from improper storage, exposure to moisture or dampness, modifications, connections, repairs (except as carried out by iENYRID or its authorized centers), misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of iENYRID, including damage caused by dropping, blown fuses, liquid entering the interior of the product.

Warranty Card

PLEASE ALWAYS KEEP THE BOX FOR ANY POSSIBLE FUTURE AFTER-SALES SHIPMENT

Dear user, Thanks for using our electric scooter. Please fill in the form below clearly for sake of better after-sale services.

Shenzhen Tianshengle Robot Co., Ltd.

? Address: Room505, 5th Floor, Liuwei Business Center, Yangmei Longjing Road, Longgang District, Shenzhen city, China

? WhatsApp: +8613612953725

✉️ Customer support: support@ienyrid.com

? Official website: www.ienyrid.com