Hollyland Solidcom C1 Quick Guide

Introduction

Thank you for purchasing the Hollyland Full-duplex Wireless Intercom System. The Solidcom C1 full-duplex wireless intercom headset system adopts the advanced DECT 6.0 technology, representing Hollyland's first true wireless and self-contained headset communication solution with exceptional sound clarity. The system operates in the 1.9GHz band, providing a reliable transmission range up to 1100ft (350m) radius (Line-of-Sight). This Quick Guide will guide you through the installation and use of the equipment.

Packing List

The following items are included in the package. The exact quantity may vary depending on the edition purchased.

Solidcom C1 – 2S 2-person Headset Intercom Package

Solidcom C1 – 3S 3-person Headset Intercom Package

Solidcom C1 – 4S 4-person Headset Intercom Package

Solidcom C1 – 6S 6-person Headset Intercom Package

Solidcom C1 – 8S 8-person Headset Intercom Package

Note: The amount of the items listed above depends on the edition. Using a non-Hollyland or incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Hollyland or authorized dealers that is designed to work with your Solidcom C1 headsets. Please dispose of damaged batteries under guidance.

Product Interfaces

A. Headset Interface

The headset features several controls and connection points:

• ① Power/Connection Indicator: A small LED indicator.
• ② Microphone: Mute/unmute by moving the microphone boom up/down.
• ③ USB Type-C Interface: Used for firmware upgrades.
• ④ Power Toggle: Button to turn the device on/off.
• ⑤ Volume + Button: Increases volume.
• ⑥ Volume - Button: Decreases volume.
• ⑦ A Button: Long press for 5 seconds to pair devices.
• ⑧ B Button: Functions only when used with the HUB station.
• ⑨ Battery Compartment: Location for the battery.
• ⑩ Speaker: The earpiece component.

B. Charging Case Interface

The charging case is used to charge batteries and store components:

• ① Charging Indicator: Displays charging status (Orange: Charging in progress; Green: Fully charged).
• ② Charging Contacts: Points within the battery slots that connect to the batteries for charging.
• ③ DC Charging Interface: Port for connecting the power adapter.

Quick Guide

1. Install the Battery

Follow these steps to install the battery:

• Step 1: Slide the battery compartment cover lock.
• Step 2: Open the cover.
• Step 3: Place the battery into the compartment and close the battery cover.

2. Turn on the Master Headset and Remote Headsets

Ensure the headsets are powered on. The Master Headset is identified by a red nameplate, and Remote Headsets by a blue nameplate.

Status Indicators:

• Indicator Light Flashes Green: Disconnected (for Remote Headsets).
• Indicator Light Stays Green: Remote Headset(s) connection successful. The Master Headset's indicator light will light up when turned on.
• Indicator Light Flashes Red: Low battery level.

3. Turn on Microphone

The microphone can be muted or unmuted by adjusting the microphone boom's position:

• Mute Range: When the microphone boom is moved upward clockwisely to an angle of approximately 80° to 85° from the horizontal, the microphone is muted.
• Talk Range: When the microphone boom is positioned downward, typically within an angle of 110° from the horizontal, the microphone is active (in talk mode).

4. Pairing

All Remote Headsets and the Master Headset included in a package will auto-pair out of the box. Manual pairing is only necessary when adding a new headset to the system.

1. Long press the 'A' buttons on the Master Headset and Remote Headsets for 5 seconds. The indicator lights on the headsets' microphone booms will flash green. Wait for the device to complete the pairing process.
2. The indicator lights on the headsets' microphone booms will turn static green when pairing is successful.
3. One Master Headset can be paired with a maximum of 7 Remote Headsets.

5. System Ready

The Solidcom C1 system is now ready for use.

Solidcom C1 is extremely versatile and can be applied in a variety of scenarios. For more information on how to operate this system, please visit: Hollyland TechHelp Download Center.

Parameters

Note: The frequency band and transmit power varies by country and region.

Safety Precautions

Do not place the headsets near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, gas stoves) to prevent the battery from overheating and exploding.

Never use non-original charging cases, cables, and batteries with the product. The use of non-original spare parts may cause electric shock, fire, explosion, or other dangers.

Support

If you encounter any problems using the product or need any help, please follow these ways to get more technical support:

• f Hollyland Products User Group
• You HollylandTech
• Tube HollylandTech
• e Support@hollyland-tech.com
• www www.hollyland-tech.com

Statements

Statement:

All copyrights belong to Shenzhen Hollyland Technology Co., LTD.

Trademark Statement:

Without the written approval of Shenzhen Hollyland Technology Co., LTD, no organization or individual may copy or reproduce part or all of the content of the text without authorization, and may not disseminate it in any form.

All representations, information, and recommendations in this document do not constitute warranties of any kind, express or implied.

Note:

Due to product version upgrades or other reasons, this quick guide will be updated from time to time. Unless otherwise agreed, this document is provided as a guide for use only. All representations, information, and recommendations in this document do not constitute warranties of any kind, express or implied.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) This device may not cause harmful interference.
• (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

The device has been tested and complies with FCC SAR limits.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.