Coleman Weather Master Tent Setup Instructions

Before You Begin

• Read all instructions before set up.
• Set up tent prior to first camping trip to become familiar with the setup and disassembly procedures.
• Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent.
• ⚠️ WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential lightning strikes or falling tree limbs in inclement weather.
• ℹ️ NOTICE: Secure product with all ground stakes, guylines and rainfly attachments for optimal performance and to prevent property damage or personal injury.
• For best results in windy conditions, position narrow end of tent into the wind.
• Two people recommended for setup.

Things You Should Know

• Condensation is normal and IS NOT LEAKAGE. It can be minimized by providing good ventilation.
• Tree limbs, tree sap, bird droppings, or moisture steadily dripping off tree limbs can cause damage to the tent fabric and its coating.
• Do not store tents without drying it off thoroughly and brushing off caked dirt.
• Store in a cool, dry place.
• Stakes should be removed by pulling on the stake itself. NEVER PULL ON THE TENT TO REMOVE STAKES AS THIS COULD RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY.
• Prolonged exposure to the sun can seriously damage material and/or cause it to become discolored.

Safety Warnings

⚠️ WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.

Product Information

Manufactured for The Coleman Company, Inc. 3600 North Hydraulic, Wichita, KS 67219 U.S.A. 1-800-835-3278 TDD: 1-316-832-8707 www.coleman.com

© 2021 & TM The Coleman Company, Inc. All rights reserved.

Self Rolling Spring for Auto Roll™ Window Option

Information on replacement parts for automatic window rolling springs.

Fiberglass Pole Repair Kit Size Guide

Note: To get the repair kit number, compare the end of the pole with the circles on the table below, or measure the diameter of the pole end.

Pole List

Identify tent poles by their labels (A-G) and quantities:

• A. Center Roof Pole... x 2
• B. Center Leg Pole .... x 4
• C. Side Roof Pole........ x 2
• D. Side Leg Pole......... x 4
• E. Short Door Pole....... x 1
• F. Long Door Pole........ x 1
• G. Awning Pole........... x 2

Diagram Description: Diagram shows a tent frame without the rainfly, illustrating the placement of poles labeled A through G. Pole A forms the main roof ridge, B forms the main leg supports, C connects to the roof poles, D connects to the leg poles, E and F are for the door, and G is for the awning.

How to Set Up and Disassemble

1. Layout & Positioning of Tent

Diagram Description: Diagram shows a stake being driven into the ground, representing the first step of preparing the campsite.

2. Positioning of Poles and Connect Leg Poles

Diagram Description: Diagram illustrates tent poles (labeled A, C, D) being inserted into grommets and sleeves of the tent fabric to form the structure.

3. Attach Rainfly

Diagram Description: Diagram shows the rainfly being placed over the tent frame and attached using clips or hooks (e.g., S Hook) to the poles (G).

4. Stake Down and Guy Out the Tent

Diagram Description: Diagram depicts the tent staked to the ground and guy lines extended and secured with stakes for stability.

5. Disassembly

To take down the tent, follow the previous steps and illustrations in the reverse order.

Auto Roll™ Spring for Windows

Instructions for the automatic window rolling spring feature.

⚠️ CAUTION: Metal springs may contain sharp edges. Keep out of reach of children.

1. Match metal spring to the colored tab on each sleeve.
2. Keeping the color mark towards you, insert. Some windows have two.
3. Press at top of the spring to activate self-rolling.

? NOTE: Remove spring for storage to prevent damage.

Diagram Description: Diagram shows a close-up of the spring mechanism for the auto-roll windows, illustrating matching the spring to a colored tab on the sleeve and inserting it.

How to Store

1. Clean and dry the tent thoroughly.
2. Fold and roll the tent neatly.
3. Store in a cool, dry place.

Diagram Description: Three icons illustrate storage: a tent being cleaned, a tent being rolled, and a cool, dry place.

Optional Accessories

Information about optional accessories that may not be included with your product model.

Attach Divider

Diagram Description: Diagram shows how to attach a divider using a ring and toggle.