Human Touch PC 410 Classic Series 2 Use & Care Manual
Brand: Human Touch
Model: PC 410 Classic Series 2
Website: humantouch.com
Phone: 800.355.2762
This manual is available in English, French, and Spanish.
Welcome to Human Touch
You have purchased one of the finest pieces of ergonomic furniture available. The Human Touch® Perfect Chair® artfully blends aesthetics, technology, and wellness for a seating experience that transcends the highest standards of comfort. The recline system eases the body into a virtually weightless position, elevating your legs above your heart for the ultimate neutral-posture position, providing relief for your back and spine. This remarkable chair alleviates soreness, tension, and fatigue caused by gravity, while its fixed-form seating ensures maximum ergonomic posture at all recline angles. Please read this manual carefully to ensure you use your chair safely and utilize all its features. Then, sit back, relax, and enjoy!
Important Safety Instructions
When using this product, basic precautions should always be followed, including:
- Do not sit on the chair arms.
- The chair is intended for stationary use, not for rocking.
- Always recline slowly to maintain optimal control of the suspension system.
- Keep fingers and loose clothing away from the guide rails at all times.
- This product is not designed for use by disabled people or children without adult supervision.
- If you have chronic back pain, have undergone back surgery, or have any questions about using this product, consult your physician before use.
- If you experience dizziness or nausea, discontinue use and contact your physician immediately.
SAVE THESE INSTRUCTIONS
Do not attempt to repair this product yourself.
This product is designed for personal in-home use. Commercial use will void the warranty.
Register your product at humantouch.com to ensure your product is in our system to simplify the warranty process should you ever need it.
Please send any questions or comments regarding this manual to documentation@humantouch.com.
Get Ready: Assembly
Your Human Touch Perfect Chair requires simple assembly. Attach the headrest/footrest frames, pads, arm caps, and head pillow.
Unpack the Boxes
Components include:
- Chair frame
- Headrest frame
- Body pad
- Arm cap (2)
- Footrest frame
- Head sock
- Head pad
- Head pillow
- Phillips-head screwdriver
- Screw (6)
Installing the Footrest Frame
- Remove the footrest frame screws: Using the provided Phillips-head screwdriver, remove the two screws from the footrest frame. Retain them for step 3.
- Slide the footrest frame onto the chair frame: Slide the two ends of the footrest frame into the holes in the front of the chair frame.
- Replace the footrest frame screws: Using a Phillips-head screwdriver and the two provided screws, secure each side of the footrest frame to the chair frame.
- Attach the canvas to the footrest frame: Using both hands, gently pull the seat canvas forward to the top of the footrest frame, then secure the two flaps located underneath the canvas to the footrest frame.
- Finish securing the canvas to the frame: Continue to pull the seat canvas forward to cover the footrest frame, then secure the two front and two side flaps using the hook and loop fasteners.
Attach the Body Pad
- Slide the body pad onto the chair frame: Slide the body pad onto the lower part of the chair frame, ensuring the frame slides into the fabric pocket on the bottom side of the pad.
- Secure the body pad: Smooth the body pad into place from the footrest toward the backrest. The pad is automatically secured using hook and loop fasteners.
Attach the Headrest Frame
- Raise the chair to an upright position: Use the recline lever to adjust the chair to an upright position for easier assembly.
- Remove the headrest frame screws: Using the provided Phillips-head screwdriver, remove the two screws from the headrest frame. Retain them for step 4.
- Insert the headrest frame into the backrest frame: With the arc of the headrest frame pointing toward the back of the chair, slide the two ends of the headrest frame into the open tube ends at the top of the backrest frame.
- Replace the headrest frame screws: Using a Phillips-head screwdriver, replace the two headrest frame screws, securing the headrest frame to the backrest frame.
Attach the Head Pad
- Slide the head sock over the headrest frame: Slide the head sock over the headrest frame as far as it will go. The padded side of the head sock should face the back of the chair.
- Slide the head pad over the head frame: Slide the head pad over the head frame, ensuring the frame slides into the fabric pocket on the bottom side of the pad. Pull the head pad down as far as it will go.
- Tuck in the body pad flap: From the front of the chair, tuck the flap on the top of the body pad up into the head pad and smooth it flat. The flap is automatically secured to the pad using hook and loop fasteners.
- Attach the head pillow: Attach the head pillow straps to the head pad straps using hook and loop fasteners. Adjust the head pillow height for maximum comfort.
Attach the Arm Caps
Remove the three screws taped to the underside of the right-hand arm cap. Place the right-hand arm cap on top of the armrest. From the underside of the armrest, secure the arm cap using the three screws. Repeat these steps to attach the left-hand arm cap.
Take a Seat: Usage
Your Human Touch Perfect Chair is easy to use. Sit down and adjust the chair to your desired position. The Perfect Chair cradles you in zero-gravity comfort, with your feet above your heart, providing the ultimate neutral-posture position for back and spine relief.
Adjust the Recline Angle
To recline, gently pull up on the recline lever, lean back on the backrest to adjust it to the desired angle, then release the lever. To incline to a more upright position, gently pull up on the recline lever, then pull up on the armrests with your hands while applying slight downward pressure with your elbows, until the backrest inclines to the desired position. Release the recline lever.
NOTE: Lean back against the backrest before reclining the chair.
Adjust the Headrest
While seated, reach up with both hands and grasp both sides of the headrest. You will feel the rigid frame beneath the soft head pad. Grasping the rigid frame, tilt the headrest forward or backward for maximum comfort. The headrest remains in this position until you adjust it again.
Getting Out of the Perfect Chair
Gently pull up on the recline lever, pull up on the armrests with your hands while applying slight downward pressure with your elbows, until the backrest inclines to a full upright position. Release the recline lever. Use the arms for support when getting up from the chair.
Care and Maintenance
To keep your product working and looking its best, please follow these simple care guidelines.
WARNING:
- Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior to using the solution on the entire product surface.
- Do not use benzene, thinner, or any other solvents on your product.
Cleaning Code Standard: W
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum extension. SofSuede® products can also be brushed with a suede brush. If your product becomes dirty, use a water-based upholstery cleaner only. To treat stains, spot clean with an upholstery shampoo or a mild detergent foam.
Maintenance and Repair:
- The mechanics of this product are specially designed and constructed to be maintenance-free. No periodic lubrication or servicing is required.
- Your chair should only be serviced by an authorized service center.
Use and Storage Environment:
- When not in use for a long period, we recommend that the chair be covered and the unit be placed in an environment free of dust and moisture.
- Do not store near heat or open flame.
- Do not leave this product exposed to direct sunlight for long periods of time, as this may cause fading or damage.
- Do not use or store in extreme temperatures; product stored in cold temperatures may require 48 hours at room temperature to function properly.
- Product should be used and stored in an environment with non-condensing humidity ranging from 10% to 80%; excessive humidity will damage the mechanics.
Specifications:
- Chair size (reclined): 62" L x 31" W x 30" H
- Product weight: 57 Lbs.
- Required recline clearance: 9"
- Maximum load weight: 400 Lbs.
*Specifications are subject to change without prior notice.
