Mytrix G900 Wireless Gaming Headset
Product Information
Product Model: G900
Charging Time: Approximately 3 Hours
Continuous Operating Time: 40+ Hours
Speaker Diameter: 50MM
Speaker Impedance: 32Ω ± 15%
Rated Input: 5V = 30mA
Microphone Polar Pattern: Omni-Directional
Microphone Frequency Response: 100Hz - 10kHz
Latency Time: 20ms
Transmit-Receive Distance: 15M
Operation Guide
The Mytrix G900 headset features several controls and indicators:
- Button 1: Microphone on/off; Switch between Bluetooth/2.4G mode.
- Button 2: On/Off, Pause/Play.
- Button 3: Indicator light.
- Port 4: Charging mouth; Audio interface.
- Component 5: Detachable, Noise-cancelling Microphone.
- Button 6: Volume +/-.
- Feature 7: RGB light (Turn light on/off).
Headset Description: The headset features a flexible, noise-cancelling microphone attached to the left earcup. It has an adjustable headband and comfortable earcups. Controls for power, volume, and mode switching are located on the earcups.
Package Contents
- Gaming Headset G900
- Detachable Noise-cancelling Microphone
- Headphone cable (3.5mm Audio Cable) x1
- Charging Cable (Type-c) x1
- User Manual
Connection Instructions
Wireless Connection (2.4G)
- Plug the USB Transmitter into the USB Port on your PC, PS4/5, or Switch (microphone functionality may be invalid on Switch). Not supported on Xbox all series. During pairing, the blue and red lights on the 2.4G receiver will flash. Once pairing is successful, the blue light will remain constantly on.
Wireless Connection (Bluetooth)
- By double-clicking the 'M' button, the device enters pairing mode, indicated by flashing red and blue lights and an audio prompt stating "Bluetooth mode."
- Open Bluetooth settings on your phone or device and search for "G901".
Wired Connection
Applicable Devices: PC, Xbox ONE, PS4/5, Switch, Mobile Device.
Connect using the included 3.5mm Audio Cable.
Precautions
- Do not attempt to disassemble the unit or change any parts, unless specified in the manual.
- Do not expose the unit to liquid, moisture, or humidity, as it is not waterproof.
- If liquid enters the unit, disconnect it from your Bluetooth device and move it to a safe area.
- Do not assemble or disassemble the unit with wet hands to avoid electric shock.
- Do not expose the unit to extremely high temperatures or dispose of it in fire, as this may result in an explosion.
- Do not place the unit in an electromagnetic interference environment to avoid malfunction.
Contact Mytrix
For any questions or problems with Mytrix products, please contact us:
Email: cs@mytrixtech.com
Website: www.mytrixtech.com
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
