Mytrix Wireless Gaming Headset JL900
Product Information
Product Model: JL900
Brand: Mytrix
Charging Time: Approximately 3 hours
Continuous Operating Time: 40+ hours
Speaker Diameter: 50MM
Speaker Impedance: 32Ω ± 15%
Rated Input: 5V = 30mA
Polar Pattern: Omni-Directional
Microphone Frequency Response: 100HZ - 10KHZ
Latency Time: 20ms
Transmit-Receive Distance: 15M
Product Description & Controls
This section describes the functions of the buttons and ports on the headset.
- 1. Microphone on/off; Switch between Bluetooth/2.4G mode: Click to toggle microphone on/off. Press and hold to switch modes.
- 2. On/Off Pause/Play: Press to turn the device on/off, pause or play music.
- 3. Indicator light: Displays the operational status of the headset.
- 4. Charging mouth; Audio interface: USB Type-C charging port and 3.5mm audio jack.
- 5. Microphone: Detachable noise-cancelling microphone.
- 6. Volume +/-: Adjusts the volume level.
- 7. RGB light: Press to turn the RGB light on/off.
Package Contents
- Gaming Headset G901
- Detachable Noise-cancelling Microphone
- USB Transmitter
- Headphone cable (3.5mm Audio Cable) x1
- Charging Cable (Type-c) x1
- User Manual x1
Wireless Connection
- Plug the USB Transmitter into the USB Port on your PC, PS4/5, or Switch. (Microphone is invalid on Switch. Not supported on Xbox all series.) During pairing, the blue and red lights on the 2.4G receiver will flash. Once pairing is successful, the blue light will remain constantly on.
- Double-click the 'M' button. The red and blue lights will flash, indicating the device has entered pairing mode with an audio prompt "Bluetooth mode." Open Bluetooth on your phone, find "G901" in Settings, and search for it to pair.
Wired Connection
Use the included 3.5mm audio cable for wired connections.
Applicable Devices: PC, Xbox ONE*, PS4/5, Switch, Mobile Device.
*3.5mm audio cable not included for Xbox ONE.
Precautions
- Do not attempt to disassemble or modify the unit.
- Avoid exposing the unit to liquid, moisture, or humidity as it is not waterproof.
- If liquid gets inside the unit, disconnect it from your Bluetooth device and move it to a safe area.
- Do not assemble or disassemble the unit with wet hands to avoid electric shock.
- Do not expose the unit to extremely high temperatures or dispose of it in fire, as this may result in an explosion.
- Do not place the unit in an environment with electromagnetic interference to avoid malfunction.
Contact Information
For any questions or problems with Mytrix products, please contact us:
Email: cs@mytrixtech.com
Website: www.mytrixtech.com
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device must not be co-located or operating in conjunction with any other antenna or transmitter.
